All,
I'm having problems with this as well. I'm able to get the following as
they are the defaults:
Conn
CPU
Disk
Info
Memory
SSH
Trends
I can't get the following:
Files
MSGS
Ports
Procs
I'm able to get them to work on the Hobbit server itself, but I can't seem
to figure out how to get the same information from the clients. I installed
the Hobbit client from the package and the servers see each other. This is
what is in the hobbit-clients.cfg file:
DEFAULT
# These are the built-in defaults.
UP 1h
LOAD 5.0 10.0
DISK * 90 95
MEMPHYS 100 101
MEMSWAP 50 80
MEMACT 90 97
PROC httpd 3 40
PROC /usr/lib/inet/inetd start
PROC /usr/lib/ssh/sshd 1 99
PROC /usr/lib/hobbit/server/bin/hobbitlaunch
#
PORT "LOCAL=%([.:]22)$" state=ESTABLISHED min=0 max=99
color=yellow TRACK=ssh "TEXT=SSH logins"
PORT "LOCAL=%([.:]80)$" state=ESTABLISHED min=0 max=99
color=yellow TRACK=http "TEXT=HTTP"
HOST=SGLNHHOBBIT
file /var/adm/messages SIZE>0 MTIME<20000 TRACK yellow
**This test is the only one that show up on the web page. It shows a
yellow "!" at the current time. I can't figure out how to get this to go
green except to vi the file every 20000 seconds. Any ideas?
file /var/log/hobbit/page.log SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/hobbit/hobbitd.log SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/hobbit/hobbitlaunch.log SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/hobbit/hobbitd.pid SIZE>0 SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/hobbit/rrd-status.log SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/hobbit/bb-network.log SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/hobbit/bb-display.log SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/hobbit/rrd-data.log SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at all
file /var/log/syslog SIZE>0 MTIME<7200 TRACK
yellow **This does not show up at
all
All the above files are in the location listed. I'm guessing that they
don't show up because of the settings listed.
This is what is in the "client-local.cfg" file (as well as the defaults):
[wfs-bkp01-atl]
file:/var/log/
Both of the above files are located on the Hobbit server. If I read the
files right on the client side there is not anything that I need to
configure. I could be wrong about this.
Thank you,
Howard Snyder
user-e66ae0780d99@xymon.invalid **
SR Network Control Engineer
Network Services
XXX-XXX-XXXX
This email, and any attachments, is intended only for use by the
addressee(s) named herein and may contain legally privileged and/or
confidential information. It is the property of Cingular Wireless and its
Affiliates. If you are not the intended recipient of this email, you are
hereby notified that any dissemination, distribution or copying of this
email, any attachments thereto, and any use of the information contained is
strictly prohibited. If you have received this email in error, please notify
me at XXX.XXX.XXXX and permanently delete the original and any copy
thereof.
*For *login requests and password resets, you will need to open a request
on the "My Logins" website:**
* *
*https://nslogins.edc.cingular.net/login.cfm?CFID=13246&CFTOKEN=41726264*
* *
*For OSS problems:*
*DL-MNOC-OSS Adjunct*
*DL-MNOC-OSS Siemens*
*DL-MNOC-OSS Nortel*
*DL-MNOC-OSS Nokia*
*DL-MNOC-OSS Lucent*
*DL-MNOC-OSS Ericsson***
[image: cid:image001.jpg at 01C746B6.59D85350]
*From:* Perumal, Santoshbabu [mailto:user-bc15f54a09ea@xymon.invalid]
*Sent:* Monday, February 04, 2008 12:34 PM
*To:* user-ae9b8668bcde@xymon.invalid
*Subject:* RE: [hobbit] monitor files,log msgs,
HI,
Thanks. It worked.
Is there any way to display contents of file or it displays only
size, timestamp, file type, permissions. When I made following entry on
client-local.cfg
file:`ls -l -t /var/adm/sa/sar*`:4096
it outputs
-rw-r--r-- 1 sys sys 118298 Feb 1 18:05 /var/adm/sa/sar01 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Feb%20%201%2018:05%20/var/adm/sa/sar01>;
-rw-r--r-- 1 sys sys 118298 Jan 31 18:05 /var/adm/sa/sar31 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2031%2018:05%20/var/adm/sa/sar31>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 30 18:05 /var/adm/sa/sar30 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2030%2018:05%20/var/adm/sa/sar30>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 29 18:05 /var/adm/sa/sar29 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2029%2018:05%20/var/adm/sa/sar29>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 28 18:05 /var/adm/sa/sar28 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2028%2018:05%20/var/adm/sa/sar28>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 25 18:05 /var/adm/sa/sar25 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2025%2018:05%20/var/adm/sa/sar25>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 24 18:05 /var/adm/sa/sar24 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2024%2018:05%20/var/adm/sa/sar24>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 23 18:05 /var/adm/sa/sar23 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2023%2018:05%20/var/adm/sa/sar23>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 22 18:05 /var/adm/sa/sar22 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2022%2018:05%20/var/adm/sa/sar22>;
[image: green] -rw-r--r-- 1 sys sys 118298 Jan 21 18:05 /var/adm/sa/sar21 <http://nypplweblogs.platts.mcgraw-hill.com/hobbit-cgi/bb-hostsvc.sh?CLIENT=nj1db200pt&SECTION=file:-rw-r--r--%20%20%201%20sys%20%20%20%20%20%20sys%20%20%20%20%20%20%20118298%20Jan%2021%2018:05%20/var/adm/sa/sar21>;
When I click on any one of the lick it outputs
[file:-rw-r--r-- 1 sys sys 118298 Feb 1 18:05
/var/adm/sa/sar01]
ERROR: No such file or directory
But file is there. Do I have to change or add anything to display the
contents of sar file or it checks only size, timestamp, permission etc.
*From:* Haertig, David F (Dave) [mailto:user-68874b735d77@xymon.invalid]
*Sent:* Friday, February 01, 2008 7:20 PM
*To:* user-ae9b8668bcde@xymon.invalid
*Subject:* RE: [hobbit] monitor files,log msgs,
Your client-local.cfg syntax is wrong. client-local tells hobbit what to
upload, hobbit-client tells Hobbit how to use what it uploaded. You have
the two files configured the same, which is wrong. Also, you don't need
anything on the client side if you're running Hobbit in the typical manner.
The client-local.cfg data is downloaded from the server to the client
automatically.
Try something more like this:
*Client-local.cfg*
[nj1db200pt]
file:/home/monitor/test
file:/var/log/
log:/var/adm/messages:4096
The default copies of all these files are commented heavily at the top
showing all this syntax.
*From:* Perumal, Santoshbabu [mailto:user-bc15f54a09ea@xymon.invalid]
*Sent:* Friday, February 01, 2008 1:24 PM
*To:* user-ae9b8668bcde@xymon.invalid
*Subject:* [hobbit] monitor files,log msgs,
I have been trying to monitor files and messages.but no luck.
On server side I have edited following files and given entries
hobbit-client.cfg
HOST=nj1db200pt
FILE /home/monitor/test mtime>600 red
DIR %^/var/log TRACK
LOG /var/adm/messages WARNING COLOR=yellow
Client-local.cfg
[nj1db200pt]
FILE /home/monitor/test mtime>600 red
DIR %^/var/log TRACK
LOG /var/adm/messages WARNING COLOR=yellow
On Client side
HOST=nj1db200pt
FILE /home/monitor/test mtime>600 red
DIR %^/var/log TRACK
LOG /var/adm/messages WARNING COLOR=yellow
Do I have to edit any other files. or I am doing something wrong. I can
see any output. I can see only white icon.help me monitorl logs and
messages
Thanks
Santhoshbabu Perumal
Unix system Administrator
System Engineering, GO & I
The Mcgraw-Hill companies
HTS East Windsor, NJ
XXX-XXX-XXXX (Desk)
XXX-XXX-XXXX (work cell)
The information contained in this message is intended only for the
recipient, and may be a confidential attorney-client communication or may
otherwise be privileged and confidential and protected from disclosure. If
the reader of this message is not the intended recipient, or an employee or
agent responsible for delivering this message to the intended recipient,
please be aware that any dissemination or copying of this communication is
strictly prohibited. If you have received this communication in error,
please immediately notify us by replying to the message and deleting it from
your computer. The McGraw-Hill Companies, Inc. reserves the right, subject
to applicable local law, to monitor and review the content of any electronic
message or information sent to or from McGraw-Hill employee e-mail addresses
without informing the sender or recipient of the message.