Thanks to everyone for your feedback!
Figured I'd give this a shot, but I can't seem to diagnose what's going
on. There's no apparent change in our xymon install. We're running 4.3.7.
I've verified that both pl scripts are in the $xymonhome/server/ext/
directory on the server and $xymonhome/client/ext/ perl is installed,
and the scripts are chown $xymonuser and chmod u+x.
I've edited the scripts to use our company name instead of stanwell. (do
you have an errant graph?)
I'm assuming this would create an additional column on the overview
page, or maybe an additional graph under trends.... See comments
interspersed below, to document the process I went through for any other
parties. (I'm using CentOS 6.5, all updates applied
-Ben
On 01/29/2014 05:36 PM, Ford, Alan wrote:
Hi Ben,
I have written a client program to capture the iostat details so that a backend process can display it.
I do it this way as I have custom client scripts for RHEL and solaris 9 and the use the same backend :-)
My client perl script works for RHEL 4, 5 and 6.
Add this section to clientlaunch.cfg on your client.
[fsio]
ENVFILE $XYMONCLIENTHOME/etc/xymonclient.cfg
CMD $XYMONCLIENTHOME/ext/xy-fsio_rhel.pl
LOGFILE $XYMONCLIENTHOME/logs/xymonclient.log
INTERVAL 5m
Also,
a) cat xy-fsio_rhel.pl | sed -e s/stanwell.com/mycompany.com/g >
$XYMONCLIENTHOME/client/ext/xy-fsio_rhel.pl
b) dos2unix $XYMONCLIENTHOME/client/ext/xy-fsio_rhel.pl
c) chown xymonclient.xymonclient $XYMONCLIENTHOME/client/ext/*
d) chmod u+x $XYMONCLIENTHOME/client/ext/*
e) /etc/sudoers:
xymonclient ALL=NOPASSWD:/usr/sbin/lvdisplay
xymonclient ALL=NOPASSWD:/sbin/partx
f) edit xy-fsio_rhel.pl set these variable definitions:
$LVDISPLAY = "$SUDO /usr/sbin/lvdisplay -m 2>/dev/null";
$PARTX = "$SUDO /sbin/partx";
On you Xymon server:
Add this section to tasks.cfg
# "rrddata" updates RRD files with information that arrives as "data" messages.
[rrddata]
ENVFILE /home/xymon/xymon/server/etc/xymonserver.cfg
NEEDS xymond
CMD xymond_channel --channel=data --log=$XYMONSERVERLOGS/rrd-data.log xymond_rrd --rrddir=$XYMONVAR/rrd \
--extra-script=/home/xymon/server/ext/process_fsio.pl \
--extra-tests=fsio
Note that there is already a section called "rrddata". Basically, add
two lines to that section (don't forget the backslash at the end of the
CMD line!) :
--extra-script=/home/xymon/server/ext/process_fsio.pl \
--extra-tests=fsio
Also, install the script:
a) cat process_fsio.pl | sed -e s/stanwell.com/mycompany.com/g >
$XYMONHOME/server/ext/process_fsio.pl
b) dos2unix $XYMONHOME/client/ext/process_fsio.pl
c) chown xymonclient.xymonclient $XYMONHOME/server/ext/*
d) chmod u+x $XYMONHOME/server/ext/*
Add this to graphs.cfg
[fsio]
FNPATTERN ^fsio,(.*).rrd
TITLE Disk Read/Write
YAXIS Stats
DEF:pb at RRDIDX@=@RRDFN@:pbusy:AVERAGE
DEF:kr at RRDIDX@=@RRDFN@:kread_sec:AVERAGE
DEF:kw at RRDIDX@=@RRDFN@:kwrite_sec:AVERAGE
CDEF:pbn at RRDIDX@=pb at RRDIDX@,5,GT,pb at RRDIDX@,UNKN,IF
COMMENT:DISK IO\: @RRDPARAM@ \:
GPRINT:pbn at RRDIDX@:LAST:busy = %3.0lf%%\n
AREA:kr at RRDIDX@#@COLOR@:
GPRINT:kr at RRDIDX@:LAST:kB Read/sec \: %5.0lf (cur)
GPRINT:kr at RRDIDX@:MAX:\: %5.0lf (max)
GPRINT:kr at RRDIDX@:MIN:\: %5.0lf (min)
GPRINT:kr at RRDIDX@:AVERAGE:\: %5.0lf (avg)\n
AREA:kw at RRDIDX@#@COLOR@:
GPRINT:kw at RRDIDX@:LAST:kB Write/sec\: %5.0lf (cur)
GPRINT:kw at RRDIDX@:MAX:\: %5.0lf (max)
GPRINT:kw at RRDIDX@:MIN:\: %5.0lf (min)
GPRINT:kw at RRDIDX@:AVERAGE:\: %5.0lf (avg)\n
[fsio2]
FNPATTERN ^fsio,(.*).rrd
TITLE I/O Utilization
YAXIS Stats
DEF:p at RRDIDX@B=@RRDFN@:pbusy:AVERAGE
DEF:p at RRDIDX@A=@RRDFN@:asvc_t:AVERAGE
DEF:p at RRDIDX@W=@RRDFN@:wsvc_t:AVERAGE
CDEF:p at RRDIDX@t=p at RRDIDX@B,5,GT,p at RRDIDX@B,UNKN,IF
COMMENT:DISK IO\: @RRDPARAM@ \:
GPRINT:p at RRDIDX@t:LAST:busy = %3.0lf%%\n
AREA:p at RRDIDX@A#@COLOR@:
GPRINT:p at RRDIDX@A:LAST:asvc_t \: %5.1lf (cur)
GPRINT:p at RRDIDX@A:MAX: \: %5.1lf (max)
GPRINT:p at RRDIDX@A:MIN: \: %5.1lf (min)
GPRINT:p at RRDIDX@A:AVERAGE: \: %5.1lf (avg)\n
LINE1:p at RRDIDX@W#@COLOR@:
GPRINT:p at RRDIDX@W:LAST:wsvc_t \: %5.1lf (cur)
GPRINT:p at RRDIDX@W:MAX: \: %5.1lf (max)
GPRINT:p at RRDIDX@W:MIN: \: %5.1lf (min)
GPRINT:p at RRDIDX@W:AVERAGE: \: %5.1lf (avg)\n
No changes so far...
Add these in your xymonserver.cfg
TEST2RRD="fsio,fsio2"
GRAPHS="fsio::1,fsio::2"
And away you go :-)
*Almost*! I get a graph under "trends" but for some reason the graph
comes up with numbers all being blank or "nan". I'm setting this up on a
nonproduction server, so I've tried generating some disk activity to
make sure it's not a divide by zero error or something.
I wish my perl foo was a bit more up to snuff.