bbmrtg.pl
list Gregory Wege
Hey guys, I'm trying to setup bbmrtg.pl on my server, using the latest version of mrtg and rrdtool. I've read the perdoc and configured everything accordingly but whenever I run the script from the command line I get the following error: bbmrtg.pl: MRTG file -> </opt/hobbit/data/rrd/hostname/hostname_1.rrd> is invalid Any help would be greatly appreciated. Thanks
list Gregory Wege
*bump* Anyone? From: Gregory Wege [mailto:user-8392a71e1a00@xymon.invalid] Sent: Friday, May 30, 2008 10:25 AM To: user-ae9b8668bcde@xymon.invalid Subject: [hobbit] bbmrtg.pl Hey guys, I'm trying to setup bbmrtg.pl on my server, using the latest version of mrtg and rrdtool. I've read the perdoc and configured everything accordingly but whenever I run the script from the command line I get the following error: bbmrtg.pl: MRTG file -> </opt/hobbit/data/rrd/hostname/hostname_1.rrd> is invalid Any help would be greatly appreciated. Thanks
list Darren Cotton
I had similar problems when I set my hobbit server up some time ago and I
would guess that it is a simple permissions problem.
Darren
"Gregory Wege" <gwege at infomanage .net> To <user-ae9b8668bcde@xymon.invalid> 02/06/2008 03:05 cc Subject Please respond to RE: [hobbit] bbmrtg.pl user-ae9b8668bcde@xymon.invalid
▸
*bump*
Anyone?
From: Gregory Wege [mailto:user-8392a71e1a00@xymon.invalid]
Sent: Friday, May 30, 2008 10:25 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: [hobbit] bbmrtg.pl
Hey guys,
I’m trying to setup bbmrtg.pl on my server, using the latest version of
mrtg and rrdtool. I’ve read the perdoc and configured everything
accordingly but whenever I run the script from the command line I get the
following error:
bbmrtg.pl: MRTG file -> </opt/hobbit/data/rrd/hostname/hostname_1.rrd> is
invalid
Any help would be greatly appreciated.
Thanks
DISCLAIMER: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.
list Gregory Wege
I checked all of the permissions and paths. Everything is set correctly. Any other ideas?
▸
-----Original Message-----
From: user-029257304364@xymon.invalid [mailto:user-029257304364@xymon.invalid] Sent: Monday, June 02, 2008 8:21 AM
To: user-ae9b8668bcde@xymon.invalid
Cc: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] bbmrtg.pl
I had similar problems when I set my hobbit server up some time ago and I
would guess that it is a simple permissions problem.
Darren
"Gregory Wege" <gwege at infomanage .net> To <user-ae9b8668bcde@xymon.invalid> 02/06/2008 03:05 cc Subject Please respond to RE: [hobbit] bbmrtg.pl user-ae9b8668bcde@xymon.invalid
*bump*
Anyone?
From: Gregory Wege [mailto:user-8392a71e1a00@xymon.invalid]
Sent: Friday, May 30, 2008 10:25 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: [hobbit] bbmrtg.pl
Hey guys,
I’m trying to setup bbmrtg.pl on my server, using the latest version of
mrtg and rrdtool. I’ve read the perdoc and configured everything
accordingly but whenever I run the script from the command line I get the
following error:
bbmrtg.pl: MRTG file -> </opt/hobbit/data/rrd/hostname/hostname_1.rrd> is
invalid
Any help would be greatly appreciated.
Thanks
DISCLAIMER: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.
list Hezki Englander
I assume these rrd files do not exist. You need to run mrtg to create those rrd files. (every 5 minutes or so using cron)
▸
On Wed, Jun 4, 2008 at 9:06 PM, Gregory Wege <user-8392a71e1a00@xymon.invalid> wrote:
I checked all of the permissions and paths. Everything is set correctly. Any other ideas? -----Original Message-----
From: user-029257304364@xymon.invalid [mailto:
user-029257304364@xymon.invalid]
▸
Sent: Monday, June 02, 2008 8:21 AM
To: user-ae9b8668bcde@xymon.invalid
Cc: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] bbmrtg.pl
I had similar problems when I set my hobbit server up some time ago and I
would guess that it is a simple permissions problem.
Darren
"Gregory Wege"
<gwege at infomanage
.net> To
<user-ae9b8668bcde@xymon.invalid>
02/06/2008 03:05 cc
Subject
Please respond to RE: [hobbit] bbmrtg.pl
user-ae9b8668bcde@xymon.invalid
*bump*
Anyone?
From: Gregory Wege [mailto:user-8392a71e1a00@xymon.invalid]
Sent: Friday, May 30, 2008 10:25 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: [hobbit] bbmrtg.pl
Hey guys,
I'm trying to setup bbmrtg.pl on my server, using the latest version of
mrtg and rrdtool. I've read the perdoc and configured everything
accordingly but whenever I run the script from the command line I get the
following error:
bbmrtg.pl: MRTG file -> </opt/hobbit/data/rrd/hostname/hostname_1.rrd> is
invalid
Any help would be greatly appreciated.
Thanks
DISCLAIMER:
This e-mail contains proprietary information some or all of which may be
legally privileged. It is for the intended recipient only. If an addressing
or transmission error has misdirected this e-mail, please notify the author
by replying to this e-mail. If you are not the intended recipient you must
not use, disclose, distribute, copy, print, or rely on this e-mail.
list Glenn Attwood
Are mrtg and hobbit running on the same server, or different servers? RRD is a binary format that is architecture specific. If you generate the RRDs on a big-endian box you can not open them on a little-endian box without doing an export/import. I think this is the same with 64bit/32bit as well. -- Glenn Attwood Network Administrator, IITS University of Toronto at Scarborough
▸
Gregory Wege wrote:I checked all of the permissions and paths. Everything is set correctly. Any other ideas?
-----Original Message-----
From: user-029257304364@xymon.invalid [mailto:user-029257304364@xymon.invalid] Sent: Monday, June 02, 2008 8:21 AM
To: user-ae9b8668bcde@xymon.invalid
Cc: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] bbmrtg.pl
I had similar problems when I set my hobbit server up some time ago and I
would guess that it is a simple permissions problem.
Darren
"Gregory Wege" <gwege at infomanage .net> To <user-ae9b8668bcde@xymon.invalid> 02/06/2008 03:05 cc Subject Please respond to RE: [hobbit] bbmrtg.pl user-ae9b8668bcde@xymon.invalid
*bump*
Anyone?
From: Gregory Wege [mailto:user-8392a71e1a00@xymon.invalid]
Sent: Friday, May 30, 2008 10:25 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: [hobbit] bbmrtg.pl
Hey guys,
I’m trying to setup bbmrtg.pl on my server, using the latest version of
mrtg and rrdtool. I’ve read the perdoc and configured everything
accordingly but whenever I run the script from the command line I get the
following error:
bbmrtg.pl: MRTG file -> </opt/hobbit/data/rrd/hostname/hostname_1.rrd> is
invalid
Any help would be greatly appreciated.
Thanks
DISCLAIMER: This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.list Tom Kauffman
Two (or three) things come to mind. First -- are all of your other hobbit rrd files in /opt/hobbit/data/rrd/<hostname>? At the very least, you should already have a /opt/hobbit/data/rrd/hostname/tcp.conn.rrd Second -- if you want hobbit to generate the graph for the mrtg data, the rrd name needs to start with 'mrtg', so your target entry in the mrtg config file should read 'Target[mrtg.hostname_1]' - and note that the target entries need to exist for EACH snmp target on the host, so I'm assuming this is for port 1. The possible third item -- there may be an issue in mrtg with the underscore. I've got my targets set as 'mrtg.hostname.portxx' with xx being from 00 to whatever the device supports. Tom Kauffman NIBCO, Inc
▸
-----Original Message-----
From: Gregory Wege [mailto:user-8392a71e1a00@xymon.invalid]
Sent: Wednesday, June 04, 2008 2:06 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] bbmrtg.pl
I checked all of the permissions and paths. Everything is set correctly. Any other ideas?
-----Original Message-----
From: user-029257304364@xymon.invalid [mailto:user-029257304364@xymon.invalid]
Sent: Monday, June 02, 2008 8:21 AM
To: user-ae9b8668bcde@xymon.invalid
Cc: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] bbmrtg.pl
I had similar problems when I set my hobbit server up some time ago and I
would guess that it is a simple permissions problem.
Darren
"Gregory Wege"
<gwege at infomanage
.net> To
<user-ae9b8668bcde@xymon.invalid>
02/06/2008 03:05 cc
Subject
Please respond to RE: [hobbit] bbmrtg.pl
user-ae9b8668bcde@xymon.invalid
*bump*
Anyone?
From: Gregory Wege [mailto:user-8392a71e1a00@xymon.invalid]
Sent: Friday, May 30, 2008 10:25 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: [hobbit] bbmrtg.pl
Hey guys,
I'm trying to setup bbmrtg.pl on my server, using the latest version of
mrtg and rrdtool. I've read the perdoc and configured everything
accordingly but whenever I run the script from the command line I get the
following error:
bbmrtg.pl: MRTG file -> </opt/hobbit/data/rrd/hostname/hostname_1.rrd> is
invalid
Any help would be greatly appreciated.
Thanks
DISCLAIMER:
This e-mail contains proprietary information some or all of which may be legally privileged. It is for the intended recipient only. If an addressing or transmission error has misdirected this e-mail, please notify the author by replying to this e-mail. If you are not the intended recipient you must not use, disclose, distribute, copy, print, or rely on this e-mail.
CONFIDENTIALITY NOTICE: This email and any attachments are for the
exclusive and confidential use of the intended recipient. If you are not
the intended recipient, please do not read, distribute or take action in
reliance upon this message. If you have received this in error, please
notify us immediately by return email and promptly delete this message
and its attachments from your computer system. We do not waive
attorney-client or work product privilege by the transmission of this
message.
list Steffan Noord
Hello, I have used xymon / BB for many years. I had to do a reinstall (server crash) I had a collum traffic But I cant get this to work again. If I manualy run the script bbmrtg.pl I see localhost status mx2.mx2....com green Thu Jun 23 17:08:02 2016 but that has to be mx2..com the configfile looks like this bb*host[mx2..com]: mx2..com bb*svc[mx2..com]: mx2..com bb*unit[mx2..com]: bytes/sec bb*althost[mx2..com]: mx2..com bb*altsvc[mx2..com]: traffic I see a ghost report reported host mx2...com.mx2... any idees how to fixc this?
list Jeremy Laidman
Do you have FQDN set to TRUE in your environment. If not, see if this helps. Try running with TRON set (to anything not empty) for debugging. J
▸
On Fri, 24 Jun 2016, 01:47 Steffan Noord <user-a2c231b1253e@xymon.invalid> wrote:
Hello, I have used xymon / BB for many years. I had to do a reinstall (server crash) I had a collum traffic But I cant get this to work again. If I manualy run the script bbmrtg.pl I see localhost status mx2.mx2……..com green Thu Jun 23 17:08:02 2016 but that has to be mx2……com the configfile looks like this bb*host[mx2……com]: mx2……com bb*svc[mx2……com]: mx2……com bb*unit[mx2……com]: bytes/sec bb*althost[mx2……com]: mx2……com bb*altsvc[mx2……com]: traffic I see a ghost report reported host mx2…….com.mx2….. any idees how to fixc this?