Disk test not working properly
list Rich Smrcina
I have an Intel SLES9 system running the Hobbit 4.2 client with the
all-in-one patch applied. A filesystem went above the yellow threshhold
and although I changed hobbit-clients.cfg to increase the yellow value,
it still appears yellow and says that the threshhold is 90 (the default).
Here is the setting in hobbit-clients.cfg:
HOST=goveritas
DISK /remote 95 98
Here is the data on the disk screen for goveritas:
yellow /remote (93% used) has reached the WARNING level (90%)
Filesystem 1024-blocks Used Available Capacity Mounted on
/dev/sda2 79687996 44199612 35488384 56% /
/dev/sda1 104376 42896 61480 42% /boot
/dev/sda5 6297208 40768 6256440 1% /tmp
/dev/sda6 3148568 832460 2316108 27% /var
/dev/sda7 587181884 101079652 486102232 18% /dbbackup
/dev/sda8 33446268 30819128 2627140 93% /remote
What is also peculiar is that the 'client data' link does not appear
above the graph:
Status unchanged in 16 hours, 56 minutes
Status message received from 172.17.1.142
--
Rich Smrcina
VM Assist, Inc.
Phone: XXX-XXX-XXXX
Ans Service: XXX-XXX-XXXX
user-61add9955ef9@xymon.invalid
Catch the WAVV! http://www.wavv.org
WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Lars Ebeling
If you read hobbit-clients.cfg you will see: # Rules are evaluated from the top of this file and down, and the first # matching rule is used. So you should put the specific rules first, and # the generic rules last. So your rule should be before: DISK * 90 95 Lars
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 16:32 Till: user-ae9b8668bcde@xymon.invalid Ämne: [hobbit] Disk test not working properly
▸
I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default). Here is the setting in hobbit-clients.cfg: HOST=goveritas DISK /remote 95 98 Here is the data on the disk screen for goveritas: yellow /remote (93% used) has reached the WARNING level (90%) Filesystem 1024-blocks Used Available Capacity Mounted on /dev/sda2 79687996 44199612 35488384 56% / /dev/sda1 104376 42896 61480 42% /boot /dev/sda5 6297208 40768 6256440 1% /tmp /dev/sda6 3148568 832460 2316108 27% /var /dev/sda7 587181884 101079652 486102232 18% /dbbackup /dev/sda8 33446268 30819128 2627140 93% /remote What is also peculiar is that the 'client data' link does not appear above the graph: Status unchanged in 16 hours, 56 minutes Status message received from 172.17.1.142 -- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Rich Smrcina
It is, the defaults are all at the end.
▸
Lars Ebeling wrote:If you read hobbit-clients.cfg you will see: # Rules are evaluated from the top of this file and down, and the first # matching rule is used. So you should put the specific rules first, and # the generic rules last. So your rule should be before: DISK * 90 95 Lars-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 16:32 Till: user-ae9b8668bcde@xymon.invalid Ämne: [hobbit] Disk test not working properly I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default). Here is the setting in hobbit-clients.cfg: HOST=goveritas DISK /remote 95 98 Here is the data on the disk screen for goveritas: yellow /remote (93% used) has reached the WARNING level (90%) Filesystem 1024-blocks Used Available Capacity Mounted on /dev/sda2 79687996 44199612 35488384 56% / /dev/sda1 104376 42896 61480 42% /boot /dev/sda5 6297208 40768 6256440 1% /tmp /dev/sda6 3148568 832460 2316108 27% /var /dev/sda7 587181884 101079652 486102232 18% /dbbackup /dev/sda8 33446268 30819128 2627140 93% /remote What is also peculiar is that the 'client data' link does not appear above the graph: Status unchanged in 16 hours, 56 minutes Status message received from 172.17.1.142 -- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Lars Ebeling
In my hobbit-clients.cfg , I have commented DISK * 90 95
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 17:16 Till: user-ae9b8668bcde@xymon.invalid Ämne: Re: SV: [hobbit] Disk test not working properly
▸
It is, the defaults are all at the end. Lars Ebeling wrote:If you read hobbit-clients.cfg you will see:# Rules are evaluated from the top of this file and down, and the > first# matching rule is used. So you should put the specific rules first, and > # the generic rules last. > > So your rule should be before:DISK * 90 95 Lars-----Ursprungligt meddelande-----Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 16:32 Till: user-ae9b8668bcde@xymon.invalid Ämne: [hobbit] Disk test not working properly I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow >> threshhold >> and although I changed hobbit-clients.cfg to increase the >> yellow value, >> it still appears yellow and says that the threshhold is 90 >> (the default). Here is the setting in hobbit-clients.cfg: HOST=goveritas DISK /remote 95 98 Here is the data on the disk screen for goveritas: yellow /remote (93% used) has reached the WARNING level (90%) Filesystem 1024-blocks Used Available Capacity Mounted on /dev/sda2 79687996 44199612 35488384 56% / /dev/sda1 104376 42896 61480 42% /boot /dev/sda5 6297208 40768 6256440 1% /tmp /dev/sda6 3148568 832460 2316108 27% /var /dev/sda7 587181884 101079652 486102232 18% /dbbackup /dev/sda8 33446268 30819128 2627140 93% /remote What is also peculiar is that the 'client data' link does not appear above the graph: Status unchanged in 16 hours, 56 minutes Status message received from 172.17.1.142 -- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Henrik Størner
▸
On Thu, Oct 26, 2006 at 09:31:32AM -0500, Rich Smrcina wrote:
I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default).
[snip]
What is also peculiar is that the 'client data' link does not appear above the graph:
Could you be running the Big Brother client on this server instead ? Regards, Henrik
list Rich Smrcina
Nope, from the process list: hobbit 9595 1 0 08:52 ? 00:00:00 /home/hobbit/client/bin/hobbitlaunch --config=/home/hobbit/client/etc/clientlaunch.cfg --log=/home/hobbit/client /logs/clientlaunch.log --pidfile=/home/hobbit/client/logs/clientlaunch.goveritas .pid
▸
Henrik Stoerner wrote:On Thu, Oct 26, 2006 at 09:31:32AM -0500, Rich Smrcina wrote:I have an Intel SLES9 system running the Hobbit 4.2 client with the all-in-one patch applied. A filesystem went above the yellow threshhold and although I changed hobbit-clients.cfg to increase the yellow value, it still appears yellow and says that the threshhold is 90 (the default).[snip]What is also peculiar is that the 'client data' link does not appear above the graph:Could you be running the Big Brother client on this server instead ? Regards, Henrik
-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Rich Smrcina
Do disk tests that are not explicitly coded still use the default?
▸
Lars Ebeling wrote:In my hobbit-clients.cfg , I have commented DISK * 90 95-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 17:16 Till: user-ae9b8668bcde@xymon.invalid Ämne: Re: SV: [hobbit] Disk test not working properly It is, the defaults are all at the end.
-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Lars Ebeling
Seems so. I do not know about C-programming, but in client_config.c I find 90 and 95 ;) Lars (I have however learnt Algol, Cobol, APL, PL/1, Assembler, Databus.......)
-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 17:55 Till: user-ae9b8668bcde@xymon.invalid Ämne: Re: SV: SV: [hobbit] Disk test not working properly
▸
Do disk tests that are not explicitly coded still use the default? Lars Ebeling wrote:In my hobbit-clients.cfg , I have commented DISK * 90 95-----Ursprungligt meddelande-----Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 17:16 Till: user-ae9b8668bcde@xymon.invalid Ämne: Re: SV: [hobbit] Disk test not working properly It is, the defaults are all at the end.-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Rich Smrcina
OK, thanks, I'll give that a try.
▸
Lars Ebeling wrote:Seems so. I do not know about C-programming, but in client_config.c I find 90 and 95 ;) Lars (I have however learnt Algol, Cobol, APL, PL/1, Assembler, Databus.......)-----Ursprungligt meddelande----- Från: Rich Smrcina [mailto:user-cf452ff334e0@xymon.invalid] Skickat: den 26 oktober 2006 17:55 Till: user-ae9b8668bcde@xymon.invalid Ämne: Re: SV: SV: [hobbit] Disk test not working properly Do disk tests that are not explicitly coded still use the default?
-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX user-61add9955ef9@xymon.invalid Catch the WAVV! http://www.wavv.org WAVV 2007 - Green Bay, WI - May 18-22, 2007
list Henrik Størner
▸
On Thu, Oct 26, 2006 at 10:54:03AM -0500, Rich Smrcina wrote:
Henrik Stoerner wrote:Could you be running the Big Brother client on this server instead ?Nope, from the process list: hobbit 9595 1 0 08:52 ? 00:00:00 /home/hobbit/client/bin/hobbitlaunch --config=/home/hobbit/client/etc/clientlaunch.cfg --log=/home/hobbit/client /logs/clientlaunch.log --pidfile=/home/hobbit/client/logs/clientlaunch.goveritas .pid
It's just very odd, because unless you're running hobbitd with the undocumented "--no-clientlog" option, then a disk status must have the "Client data available" link. Could you try running (as the hobbit user) $ bbcmd hobbitd_client --test 2006-10-26 22:53:28 Using default environment file /usr/lib/hobbit/server/etc/hobbitserver.cfg Hostname (.=end, ?=dump, !=reload) []: MYHOSTNAME Hosttype []: Test (cpu, mem, disk, proc, log, port): disk Filesystem: /home Yellow at 90%, red at 95% to see what the configuration ends up being ? Also, does the command bb 127.0.0.1 "clientlog MYHOSTNAME" return any data ? Henrik