Procs test clear?

4 messages in this thread

list Stefan Freisler · Thu, 25 Jan 2007 15:06:36 +0100 ·

Hi,
i installed an server and now my procs test is clear, while i have configured my server correct i think:

All other Tests work fine. What can i do?

HOST=xxxxxxxxxxxx.de
        PROC crond 1 -1 red
        LOG /var/log/messages error,fail,panic,NOTICE COLOR=red %uthentication.failure
        LOG /var/log/messages warn,WARN COLOR=yellow %uthentication.failure
        LOG /var/log/boot.log error,fail,panic,NOTICE COLOR=red
        LOG /var/log/boot.log warn,WARN COLOR=yellow
        LOG /var/log/maillog error,fail,panic,NOTICE COLOR=red %format.error
        LOG /var/log/maillog warn,WARN COLOR=yellow %format.error
        LOG /var/log/cron error,fail,panic,NOTICE COLOR=red
        LOG /var/log/cron warn,WARN COLOR=yellow


DEFAULT
        # These are the built-in defaults.
        UP      1h
        LOAD    5.0 10.0
        DISK    * 90 95
        MEMPHYS 100 101
        MEMSWAP 50 80
        MEMACT  90 97

on all other systems it works with this or nearly the same config.

thx
Stefan

list Stefan Freisler · Thu, 25 Jan 2007 16:08:17 +0100 ·

Hi,
i get some error in my hobbitd.log

2007-01-25 15:49:47 Oversize status msg from 10.28.1.37 for xxxxxxxxxxxx.de:ports truncated (n=360392, limit=262144)

i have now put in my hobbit-server.cfg the following lines:

MAXMSG_STATUS="1024"
MAXMSG_CLIENT="1024"
MAXMSG_DATA="1024"
MAXMSG_NOTES="1024"

Is this correct? My Client send Date correctly but i get allways data like and i have an clear status:
Thu Jan 25 16:06:31 CET 2007 - Processes NOT ok
 No process checks defined

  PID  PPID USER      STARTED S PRI %CPU     TIME %MEM   RSZ    VSZ CMD
    1     0 root     11:54:08 S  23  0.0 00:00:02  0.0   568   1740 init [3] .......

user-75055581652a@xymon.invalid schrieb am 25.01.2007 15:06:36:

▸ quoted from Stefan Freisler

Hi, i installed an server and now my procs test is clear, while i have configured my server correct i think: 
All other Tests work fine. What can i do? 
HOST=xxxxxxxxxxxx.de         PROC crond 1 -1 red         LOG /var/log/messages error,fail,panic,NOTICE COLOR=red %
uthentication.failure         LOG /var/log/messages warn,WARN COLOR=yellow

%uthentication.failure

        LOG /var/log/boot.log error,fail,panic,NOTICE COLOR=red         LOG /var/log/boot.log warn,WARN COLOR=yellow         LOG /var/log/maillog error,fail,panic,NOTICE COLOR=red

%format.error

        LOG /var/log/maillog warn,WARN COLOR=yellow %format.error         LOG /var/log/cron error,fail,panic,NOTICE COLOR=red         LOG /var/log/cron warn,WARN COLOR=yellow 


DEFAULT         # These are the built-in defaults.         UP      1h         LOAD    5.0 10.0         DISK    * 90 95         MEMPHYS 100 101         MEMSWAP 50 80         MEMACT  90 97 
on all other systems it works with this or nearly the same config. 
thx Stefan

list Dominique Frise · Thu, 25 Jan 2007 16:18:50 +0100 ·

▸ quoted from Stefan Freisler

user-75055581652a@xymon.invalid wrote:

Hi,
i get some error in my hobbitd.log

2007-01-25 15:49:47 Oversize status msg from 10.28.1.37 for 
xxxxxxxxxxxx.de:ports truncated (n=360392, limit=262144)

i have now put in my hobbit-server.cfg the following lines:

MAXMSG_STATUS="1024"
MAXMSG_CLIENT="1024"
MAXMSG_DATA="1024"
MAXMSG_NOTES="1024"

Is this correct? My Client send Date correctly but i get allways data 
like and i have an clear status:
*Thu Jan 25 16:06:31 CET 2007 - Processes NOT ok*


clear No process checks defined

▸ quoted from Stefan Freisler


 PID  PPID USER      STARTED S PRI %CPU     TIME %MEM   RSZ    VSZ CMD
   1     0 root     11:54:08 S  23  0.0 00:00:02  0.0   568   1740 init 
[3]  
.......

user-75055581652a@xymon.invalid schrieb am 25.01.2007 15:06:36:

Hi,
i installed an server and now my procs test is clear, while i have
configured my server correct i think:

All other Tests work fine. What can i do?

HOST=xxxxxxxxxxxx.de
        PROC crond 1 -1 red
        LOG /var/log/messages error,fail,panic,NOTICE COLOR=red %
uthentication.failure
        LOG /var/log/messages warn,WARN COLOR=yellow

%uthentication.failure

        LOG /var/log/boot.log error,fail,panic,NOTICE COLOR=red
        LOG /var/log/boot.log warn,WARN COLOR=yellow
        LOG /var/log/maillog error,fail,panic,NOTICE COLOR=red

%format.error

        LOG /var/log/maillog warn,WARN COLOR=yellow %format.error
        LOG /var/log/cron error,fail,panic,NOTICE COLOR=red
        LOG /var/log/cron warn,WARN COLOR=yellow


DEFAULT
        # These are the built-in defaults.
        UP      1h
        LOAD    5.0 10.0
        DISK    * 90 95
        MEMPHYS 100 101
        MEMSWAP 50 80
        MEMACT  90 97

on all other systems it works with this or nearly the same config.

thx
Stefan


You have to put bytes values in MAXMSG_* settings.
Default for MAXMSG_STATUS is 262144 or 256 KB.

Example for 512 KB
MAXMSG_STATUS="524288"


Dominique
UNIL - University of Lausanne

list Stefan Freisler · Thu, 25 Jan 2007 16:41:57 +0100 ·

Hmm how can i test it?

My test is still clear.

thx
Stefan

Dominique Frise <user-78ab6673b600@xymon.invalid> schrieb am 25.01.2007 16:18:50:

▸ quoted from Dominique Frise

user-75055581652a@xymon.invalid wrote:

Hi,
i get some error in my hobbitd.log

2007-01-25 15:49:47 Oversize status msg from 10.28.1.37 for 
xxxxxxxxxxxx.de:ports truncated (n=360392, limit=262144)

i have now put in my hobbit-server.cfg the following lines:

MAXMSG_STATUS="1024"
MAXMSG_CLIENT="1024"
MAXMSG_DATA="1024"
MAXMSG_NOTES="1024"

Is this correct? My Client send Date correctly but i get allways data 
like and i have an clear status:
*Thu Jan 25 16:06:31 CET 2007 - Processes NOT ok*
clear No process checks defined

 PID  PPID USER      STARTED S PRI %CPU     TIME %MEM   RSZ    VSZ CMD
   1     0 root     11:54:08 S  23  0.0 00:00:02  0.0   568   1740 
init 
[3] 
.......

user-75055581652a@xymon.invalid schrieb am 25.01.2007 15:06:36:

Hi,
i installed an server and now my procs test is clear, while i have
configured my server correct i think:

All other Tests work fine. What can i do?

HOST=xxxxxxxxxxxx.de
        PROC crond 1 -1 red
        LOG /var/log/messages error,fail,panic,NOTICE COLOR=red %
uthentication.failure
        LOG /var/log/messages warn,WARN COLOR=yellow

%uthentication.failure

        LOG /var/log/boot.log error,fail,panic,NOTICE COLOR=red
        LOG /var/log/boot.log warn,WARN COLOR=yellow
        LOG /var/log/maillog error,fail,panic,NOTICE COLOR=red

%format.error

        LOG /var/log/maillog warn,WARN COLOR=yellow %format.error
        LOG /var/log/cron error,fail,panic,NOTICE COLOR=red
        LOG /var/log/cron warn,WARN COLOR=yellow


DEFAULT
        # These are the built-in defaults.
        UP      1h
        LOAD    5.0 10.0
        DISK    * 90 95
        MEMPHYS 100 101
        MEMSWAP 50 80
        MEMACT  90 97

on all other systems it works with this or nearly the same config.

thx
Stefan


You have to put bytes values in MAXMSG_* settings.
Default for MAXMSG_STATUS is 262144 or 256 KB.

Example for 512 KB
MAXMSG_STATUS="524288"


Dominique
UNIL - University of Lausanne

Procs test clear? 🔗 link

Procs test clear?