bbwin 0.13 installation ended prematurely

14 messages in this thread

list Carl Melgaard · Thu, 28 Aug 2014 11:49:47 +0200 ·

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Carl Melgaard · Thu, 28 Aug 2014 12:17:30 +0200 ·

Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl

Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid | www.rakon.com

[cid:image001.jpg at 01CFC2BA.0A0EA030]

[cid:image002.jpg at 01CFC2BA.0A0EA030]

This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.

▸ quoted from Carl Melgaard

From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Malcolm Hunter · Thu, 28 Aug 2014 11:27:28 +0100 ·

Run the setup as Administrator.

Sent with AquaMail for Android
http://www.aqua-mail.com

▸ quoted from Carl Melgaard



On 28 August 2014 11:03:06 Carl Melgaard <user-cdea55422fa4@xymon.invalid> wrote:

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Malcolm Hunter · Thu, 28 Aug 2014 12:36:08 +0200 ·

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net

▸ quoted from Carl Melgaard

Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard"
To: "'xymon@xymon.com'"
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) – but I suspect that’s the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? J

▸ quoted from Carl Melgaard

Carl

Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid | www.rakon.com

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.

From: Xymon [mailto:xymon-bounces@xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon@xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) – is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Carl Melgaard · Thu, 28 Aug 2014 12:51:18 +0200 ·

Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

▸ quoted from Malcolm Hunter


Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid>
To: "'xymon at xymon.com'" <xymon at xymon.com>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915


user-96685bdc864b@xymon.invalid | www.rakon.com<http://www.rakon.com>;

[cid:image001.jpg at 01CFC2BE.C27BECF0]

[cid:image002.jpg at 01CFC2BE.C27BECF0]

▸ quoted from Malcolm Hunter


This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Carl Melgaard · Thu, 28 Aug 2014 13:17:56 +0200 ·

Hi,

I dont have any trouble on other servers either - with the same msi-file. So I don't suspect it to be the file itself :)

Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:16
Til: Carl Melgaard
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Delete msi file.
Re-download.

Nothing remotely wrong here.
Just installed bbwin.013.msi with no issues at all.


Med Venlig Hilsen
Kenneth S. Petersen

▸ quoted from Carl Melgaard



Fra: Xymon [mailto:xymon-bounces at xymon.com] På vegne af Carl Melgaard
Sendt: 28. august 2014 12:51
Til: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid<mailto:user-cdea55422fa4@xymon.invalid>>
To: "'xymon at xymon.com'" <xymon at xymon.com<mailto:xymon at xymon.com>>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915


user-96685bdc864b@xymon.invalid<mailto:user-96685bdc864b@xymon.invalid> | www.rakon.com<http://www.rakon.com>;

[cid:image001.jpg at 01CFC2C2.7B42E7E0]

[cid:image002.jpg at 01CFC2C2.7B42E7E0]

▸ quoted from Carl Melgaard


This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Kenneth S. Petersen · Thu, 28 Aug 2014 11:23:06 +0000 ·

Is it run from remote file location ?

How about properties for msi file it self ? Is it blocked from running because of unsecure location ?
File attributes:
Security: This file is from another computer, and is blocked to protect your computer.

▸ quoted from Carl Melgaard



Med Venlig Hilsen
Kenneth S. Petersen


Fra: Carl Melgaard [mailto:user-cdea55422fa4@xymon.invalid]
Sendt: 28. august 2014 13:18
Til: 'xymon at xymon.com'
Cc: Kenneth S. Petersen
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I dont have any trouble on other servers either - with the same msi-file. So I don't suspect it to be the file itself :)

Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:16
Til: Carl Melgaard
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Delete msi file.
Re-download.

Nothing remotely wrong here.
Just installed bbwin.013.msi with no issues at all.


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Xymon [mailto:xymon-bounces at xymon.com] På vegne af Carl Melgaard
Sendt: 28. august 2014 12:51
Til: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid<mailto:user-cdea55422fa4@xymon.invalid>>
To: "'xymon at xymon.com'" <xymon at xymon.com<mailto:xymon at xymon.com>>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid<mailto:user-96685bdc864b@xymon.invalid> | www.rakon.com<http://www.rakon.com>;


[The Queens Awards for Enterprise 2012]

[Rakon Logo]

▸ quoted from Carl Melgaard


This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Carl Melgaard · Thu, 28 Aug 2014 13:25:50 +0200 ·

Hi,

No, I've copied it to the server itself. Btw, the "ended prematurely" is a bbwin-dialog, saying it couldn't install properly - not a native Windows feature. So the msi-file runs fine, it just cant install properly.

▸ quoted from Kenneth S. Petersen


Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:23
Til: Carl Melgaard
Cc: xymon at xymon.com
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Is it run from remote file location ?

How about properties for msi file it self ? Is it blocked from running because of unsecure location ?
File attributes:
Security: This file is from another computer, and is blocked to protect your computer.


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Carl Melgaard [mailto:user-cdea55422fa4@xymon.invalid]
Sendt: 28. august 2014 13:18
Til: 'xymon at xymon.com'
Cc: Kenneth S. Petersen
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I dont have any trouble on other servers either - with the same msi-file. So I don't suspect it to be the file itself :)

Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:16
Til: Carl Melgaard
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Delete msi file.
Re-download.

Nothing remotely wrong here.
Just installed bbwin.013.msi with no issues at all.


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Xymon [mailto:xymon-bounces at xymon.com] På vegne af Carl Melgaard
Sendt: 28. august 2014 12:51
Til: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid<mailto:user-cdea55422fa4@xymon.invalid>>
To: "'xymon at xymon.com'" <xymon at xymon.com<mailto:xymon at xymon.com>>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid<mailto:user-96685bdc864b@xymon.invalid> | www.rakon.com<http://www.rakon.com>;


[cid:image001.jpg at 01CFC2C3.9578D8D0]

[cid:image002.jpg at 01CFC2C3.9578D8D0]

▸ quoted from Kenneth S. Petersen


This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Kenneth S. Petersen · Thu, 28 Aug 2014 11:31:31 +0000 ·

Sounds very strange.

When you write "install properly" is it then executed with some parameters at the installation ?

Can you see the service I windows services ?

▸ quoted from Carl Melgaard



Med Venlig Hilsen
Kenneth S. Petersen


Fra: Carl Melgaard [mailto:user-cdea55422fa4@xymon.invalid]
Sendt: 28. august 2014 13:26
Til: 'xymon at xymon.com'
Cc: Kenneth S. Petersen
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

No, I've copied it to the server itself. Btw, the "ended prematurely" is a bbwin-dialog, saying it couldn't install properly - not a native Windows feature. So the msi-file runs fine, it just cant install properly.

Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:23
Til: Carl Melgaard
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Is it run from remote file location ?

How about properties for msi file it self ? Is it blocked from running because of unsecure location ?
File attributes:
Security: This file is from another computer, and is blocked to protect your computer.


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Carl Melgaard [mailto:user-cdea55422fa4@xymon.invalid]
Sendt: 28. august 2014 13:18
Til: 'xymon at xymon.com'
Cc: Kenneth S. Petersen
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I dont have any trouble on other servers either - with the same msi-file. So I don't suspect it to be the file itself :)

Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:16
Til: Carl Melgaard
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Delete msi file.
Re-download.

Nothing remotely wrong here.
Just installed bbwin.013.msi with no issues at all.


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Xymon [mailto:xymon-bounces at xymon.com] På vegne af Carl Melgaard
Sendt: 28. august 2014 12:51
Til: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid<mailto:user-cdea55422fa4@xymon.invalid>>
To: "'xymon at xymon.com'" <xymon at xymon.com<mailto:xymon at xymon.com>>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid<mailto:user-96685bdc864b@xymon.invalid> | www.rakon.com<http://www.rakon.com>;

[The Queens Awards for Enterprise 2012]

[Rakon Logo]

This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Carl Melgaard · Thu, 28 Aug 2014 13:33:59 +0200 ·

Hi,

I get to choose "typical/custom/complete" in the bbwin-dialog, and then afterwards it gives me the "ended prematurely"-dialog. Nothing gets installed/copied - no files, nothing. It is indeed some admin-rights issue, just unsure how to fix it.

▸ quoted from Kenneth S. Petersen


Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:32
Til: Carl Melgaard; 'xymon at xymon.com'
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Sounds very strange.

When you write "install properly" is it then executed with some parameters at the installation ?

Can you see the service I windows services ?


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Carl Melgaard [mailto:user-cdea55422fa4@xymon.invalid]
Sendt: 28. august 2014 13:26
Til: 'xymon at xymon.com'
Cc: Kenneth S. Petersen
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

No, I've copied it to the server itself. Btw, the "ended prematurely" is a bbwin-dialog, saying it couldn't install properly - not a native Windows feature. So the msi-file runs fine, it just cant install properly.

Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:23
Til: Carl Melgaard
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Is it run from remote file location ?

How about properties for msi file it self ? Is it blocked from running because of unsecure location ?
File attributes:
Security: This file is from another computer, and is blocked to protect your computer.


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Carl Melgaard [mailto:user-cdea55422fa4@xymon.invalid]
Sendt: 28. august 2014 13:18
Til: 'xymon at xymon.com'
Cc: Kenneth S. Petersen
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I dont have any trouble on other servers either - with the same msi-file. So I don't suspect it to be the file itself :)

Regards,

Carl Melgaard

Fra: Kenneth S. Petersen [mailto:user-bdc293fcf8df@xymon.invalid]
Sendt: 28. august 2014 13:16
Til: Carl Melgaard
Emne: SV: [Xymon] bbwin 0.13 installation ended prematurely

Delete msi file.
Re-download.

Nothing remotely wrong here.
Just installed bbwin.013.msi with no issues at all.


Med Venlig Hilsen
Kenneth S. Petersen


Fra: Xymon [mailto:xymon-bounces at xymon.com] På vegne af Carl Melgaard
Sendt: 28. august 2014 12:51
Til: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid<mailto:user-cdea55422fa4@xymon.invalid>>
To: "'xymon at xymon.com'" <xymon at xymon.com<mailto:xymon at xymon.com>>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid<mailto:user-96685bdc864b@xymon.invalid> | www.rakon.com<http://www.rakon.com>;


[cid:image001.jpg at 01CFC2C4.B8E026B0]

[cid:image002.jpg at 01CFC2C4.B8E026B0]

▸ quoted from Kenneth S. Petersen


This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Malcolm Hunter · Thu, 28 Aug 2014 15:31:48 +0200 ·

Did you know that on Windows 2008 R2, Run as Administrator forces the current directory to %SystemRoot%\System32? If you're using relative paths they won't work when you Run as Administrator.

▸ signature

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net

Sent: Thursday, August 28, 2014 at 11:51 AM

▸ quoted from Carl Melgaard

From: "Carl Melgaard"
To: "'xymon@xymon.com'"
Cc: "'Malcolm Hunter'"
Subject: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in “ended prematurely”… I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon@xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net

Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard"
To: "'xymon@xymon.com'"
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) – but I suspect that’s the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? J

Carl

From: Xymon [mailto:xymon-bounces@xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon@xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Regards,

Carl Melgaard

list Malcolm Hunter · Thu, 28 Aug 2014 15:35:06 +0200 ·

Have you tried with UAC turned off?

▸ signature

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net

Sent: Thursday, August 28, 2014 at 11:51 AM

▸ quoted from Carl Melgaard

From: "Carl Melgaard"
To: "'xymon@xymon.com'"
Cc: "'Malcolm Hunter'"
Subject: SV: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Regards,

Carl Melgaard

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net

Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard"
To: "'xymon@xymon.com'"
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) – but I suspect that’s the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? J

Carl

From: Xymon [mailto:xymon-bounces@xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon@xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

Regards,

Carl Melgaard

list Carl Melgaard · Fri, 29 Aug 2014 08:29:40 +0200 ·

Hi,

No, I havent yet - as it requires a reboot, and its a production MSSQL-server - but I'll let you guys know the outcome when I get the clearance.

▸ quoted from Malcolm Hunter


Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 15:35
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: SV: [Xymon] bbwin 0.13 installation ended prematurely

Have you tried with UAC turned off?
--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:51 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid>
To: "'xymon at xymon.com'" <xymon at xymon.com>
Cc: "'Malcolm Hunter'" <user-8c18ec239c05@xymon.invalid>
Subject: SV: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid>
To: "'xymon at xymon.com'" <xymon at xymon.com>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid | www.rakon.com<http://www.rakon.com>;


[cid:image001.jpg at 01CFC363.5F1A9530]

[cid:image002.jpg at 01CFC363.5F1A9530]

▸ quoted from Malcolm Hunter


This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

list Carl Melgaard · Thu, 18 Sep 2014 10:29:48 +0200 ·

Hi,

Just a follow-up on this, as the machine in question was rebootet yesterday and UAC was disabled - and the agent installed flawlessly after this :)

Regards,
Carl Melgaard

▸ quoted from Carl Melgaard


Fra: Xymon [mailto:xymon-bounces at xymon.com] På vegne af Carl Melgaard
Sendt: 29. august 2014 08:30
Til: 'Malcolm Hunter'
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

No, I havent yet - as it requires a reboot, and its a production MSSQL-server - but I'll let you guys know the outcome when I get the clearance.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 15:35
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: SV: [Xymon] bbwin 0.13 installation ended prematurely

Have you tried with UAC turned off?
--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:51 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid>
To: "'xymon at xymon.com'" <xymon at xymon.com>
Cc: "'Malcolm Hunter'" <user-8c18ec239c05@xymon.invalid>
Subject: SV: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Doing the batch-file trick results in the option to run as admin, but the cmd-window closes without starting the msi-file. Doing a cmd-prompt as admin and running the bbwin-msi also ends up in "ended prematurely"... I wonder if UAC is the culprit somehow.

Regards,

Carl Melgaard

Fra: Malcolm Hunter [mailto:user-8c18ec239c05@xymon.invalid]
Sendt: 28. august 2014 12:36
Til: Carl Melgaard
Cc: 'xymon at xymon.com'
Emne: Re: [Xymon] bbwin 0.13 installation ended prematurely

Interesting. I actually run the MSI from a batch file as I do other things like fetching the configuration from the server. Try creating a batch file that calls the MSI and run that as Administrator.

Malcolm

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


Sent: Thursday, August 28, 2014 at 11:17 AM
From: "Carl Melgaard" <user-cdea55422fa4@xymon.invalid>
To: "'xymon at xymon.com'" <xymon at xymon.com>
Subject: Re: [Xymon] bbwin 0.13 installation ended prematurely
Hi,

Sadly that option wasnt available on the file (even shift-right-clicking the msi-file) - but I suspect that's the culprit somehow.

Regards,

Carl Melgaard

Fra: Carl Inglis [mailto:user-96685bdc864b@xymon.invalid]
Sendt: 28. august 2014 12:06
Til: Carl Melgaard
Emne: RE: bbwin 0.13 installation ended prematurely

Did you Run As Administrator? :)

Carl


Carl Inglis AMBCS
Systems Administrator

Rakon UK Limited
Dowsett House, Sadler Road, Lincoln LN6 3RS, United Kingdom
Tel: +XX XXXX XXXXXX | Fax: +XX XXXX XXXXXX | Mob: +44 7786 552915
user-96685bdc864b@xymon.invalid | www.rakon.com<http://www.rakon.com>;


[cid:image001.jpg at 01CFD32B.77B3F2D0]

[cid:image002.jpg at 01CFD32B.77B3F2D0]

▸ quoted from Carl Melgaard


This message together with any attachments contains confidential information and may be
subject to privilege. If you are not the intended recipient you may not distribute it in any
way, you must notify the sender immediately and delete any copies of the message along
with its attachments.

Rakon UK Ltd is a limited company registered in England and Wales.
Registered Office: Antell House, Windsor Place, Harlow, Essex, England, CM20 2GQ
Company Registration Number: 5128090.

Please be aware that Rakon UK Limited may monitor email traffic data
including the date, time, subject line, sender and recipients for the
purposes of security and usage monitoring. Automated monitoring
systems may also be applied to ascertain whether incoming/outgoing
emails are likely to contain viruses, other destructive devices or
inappropriate content.
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: 28 August 2014 10:50
To: 'xymon at xymon.com'
Subject: [Xymon] bbwin 0.13 installation ended prematurely

Hi,

I just had bbwin 0.13 install end prematurely on a Windows 2008 R2 server (x64) - is there any known requirements to installing bbwin 0.13? Like dotnet-framework 3.5 or similar? The server has dotnet-framework 4.0 installed. Any ideas?

Regards,

Carl Melgaard

bbwin 0.13 installation ended prematurely 🔗 link

bbwin 0.13 installation ended prematurely