how to use xymon-client-4.3.17-1.el5.x86_64.rpm; Xymon 4.3.17 released 🔗 link

I downloaded the xymon-client rpm from
http://terabithia.org/rpms/xymon/el5/xymon-client-4.3.17-1.el5.x86_64.rp
m
And installed on one of my RH 5.5 64 bit server:

[root at pctyfin01dev kpeng]# rpm -Uvh xymon-client-4.3.17-1.el5.x86_64.rpm

Install went OK, but after install, I wondered: 
1. How can I configure the xymon-client points to my xymon server?
2. How to start the client agent? 

-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of J.C. Cleaver
Sent: Tuesday, February 25, 2014 1:06 PM
To: Xymon Mailing List
Subject: Re: [Xymon] Xymon 4.3.17 released

On Tue, February 25, 2014 9:24 am, Mark Felder wrote:

I've pushed 4.3.17 to FreeBSD's ports. Thanks for your continued
efforts, Henrik.

http://svnweb.freebsd.org/ports/head/net-mgmt/xymon-server/Makefile?revi
sion=346008&view=markup

I've also built an updated 4.3.17 set of RPMs for RHEL/CentOS 5/6 and
Fedora 18+.

They're available at http://terabithia.org/rpms/xymon/

Thanks, as always, Henrik for an awesome and flexible monitoring
project!

Regards,

-jc

On 2/25/2014 3:51 PM, Peng, Kingston wrote:

I don't wanna go all 'rtfm' on you, but I have to ask... have you read 
the documentation?

Under the 'help' menu on your Xymon server's web page, you will find 
helpful instructions which will get you started.
-- 
    Do things because you should, not just because you can.

John Thurston    XXX-XXX-XXXX
user-ce4d79d99bab@xymon.invalid
Enterprise Technology Services
Department of Administration
State of Alaska

I installed xymon server on island-vm (ip address 10.1.2.159 -CentOS
6.1-64 bit OS) days ago, result is good. 

As I tested xymon client install on both CentOS 5.5 (centos-55-64, first
run, ip addr 192.168.1.30) or CentOS 5.7 server (island-test-57, ip
address:  10.1.2.160, 2nd run), neither of them I can see the cpu, disk,
memory from server URL:  http://192.168.1.28/xymon/ or
http://10.1.2.159/xymon/ respectively. 

I followed strictly from the help document I got from server web page.  
I recorded all the details of what I have gone through (see the attached
MS Notepad document). 

When configure xymon client on 4.3.16, "make" gave me error: 
...
/home/qkpeng/xymon-4.3.16/lib/matching.c:198: undefined reference to
`within_sla'
collect2: ld returned 1 exit status
make[1]: *** [matching.o] Error 1
make: *** [lib-client] Error 2

I tried to use xymon-4.3.17.tar.gz, and I can bypass "make" error, and
successfully run to the end, but the server still don't show me "cpu
disk memory" icon status.  

Attached is all the details I have gone through, but I can't figure out
where I did wrong? 

-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of John Thurston
Sent: Tuesday, February 25, 2014 8:06 PM
To: xymon at xymon.com
Subject: Re: [Xymon] how to use xymon-client-4.3.17-1.el5.x86_64.rpm;
Xymon 4.3.17 released

On 2/25/2014 3:51 PM, Peng, Kingston wrote:

http://terabithia.org/rpms/xymon/el5/xymon-client-4.3.17-1.el5.x86_64.rp

I don't wanna go all 'rtfm' on you, but I have to ask... have you read 
the documentation?

Under the 'help' menu on your Xymon server's web page, you will find 
helpful instructions which will get you started.
-- 
    Do things because you should, not just because you can.

John Thurston    XXX-XXX-XXXX
user-ce4d79d99bab@xymon.invalid
Enterprise Technology Services
Department of Administration
State of Alaska