Xymon 4.2.2 (a.k.a. Hobbit) has been released
list Henrik Størner
I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge. Xymon is the new name for the Hobbit monitor - the name was changed for legal reasons. The new version fixes a lot of bugs in the previous release, including all of the bugs that were handled by the "all-in-one" patch for Hobbit 4.2.0. Version 4.2.2 also merges server-side support required by several of the popular Xymon add-ons: Devmon, BBWin and the hobbit-perl-client. It is available at the Sourceforge project site, https://sourceforge.net/project/showfiles.php?group_id=128058&package_id=140220&release_id=647612 Regards, Henrik
list Greg L Hubbard
Congratulations! Thanks for your ongoing dedication... GLH
▸
-----Original Message-----
From: Henrik Storner [mailto:user-ce4a2c883f75@xymon.invalid]
Sent: Tuesday, December 16, 2008 9:13 AM
To: user-ae9b8668bcde@xymon.invalid
Cc: user-31496adb6da5@xymon.invalid
Subject: [hobbit] Xymon 4.2.2 (a.k.a. Hobbit) has been released
I am pleased to announce that Xymon version 4.2.2 is now available from
Sourceforge.
Xymon is the new name for the Hobbit monitor - the name was changed for
legal reasons. The new version fixes a lot of bugs in the previous
release, including all of the bugs that were handled by the "all-in-one"
patch for Hobbit 4.2.0.
Version 4.2.2 also merges server-side support required by several of the
popular Xymon add-ons: Devmon, BBWin and the hobbit-perl-client.
It is available at the Sourceforge project site,https://sourceforge.net/project/showfiles.php?group_id=128058&package_id =140220&release_id=647612 Regards, Henrik
list Padraig Lennon
Excellent.. Can't wait to try it... regards, Padraig Lennon Senior Systems Integration Engineer Pioneer Investments Management Ltd 5th Floor | 1 Georges Quay Plaza | Georges Quay | Dublin 2 | Rep. of Ireland. Tel. +353 (0)1 480.2081 | Fax. +353 (0)1 480.1111 user-7738cfcc6ae0@xymon.invalid | www.pioneerinvestments.com Please consider the environment before printing this e-mail
▸
-----Original Message----- From: Henrik Storner [mailto:user-ce4a2c883f75@xymon.invalid] Sent: 16 December 2008 15:13 To: user-ae9b8668bcde@xymon.invalid Cc: user-31496adb6da5@xymon.invalid Subject: [hobbit] Xymon 4.2.2 (a.k.a. Hobbit) has been released I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge. Xymon is the new name for the Hobbit monitor - the name was changed for legal reasons. The new version fixes a lot of bugs in the previous release, including all of the bugs that were handled by the "all-in-one" patch for Hobbit 4.2.0. Version 4.2.2 also merges server-side support required by several of the popular Xymon add-ons: Devmon, BBWin and the hobbit-perl-client. It is available at the Sourceforge project site, https://sourceforge.net/project/showfiles.php?group_id=128058&package_id =140220&release_id=647612 Regards, Henrik
-------------- next part --------------
"The information in this e-mail and in any attachments is confidential and intended solely for the attention and use of the named addressee(s). This information may be subject to legal, professional or other privilege and further distribution of it is strictly prohibited without our authority. If you are not the intended recipient, you are not authorised to and must not disclose, copy, distribute, or retain this message or any part of it, and should notify us immediately.
This footnote also confirms that this email has been automatically scanned for the presence of computer viruses, profanities and certain file types."
Pioneer Investment Management Limited.
1 George’s Quay Plaza, George’s Quay, Dublin 2, Ireland.
Registered in Ireland no. 287793.
list Rich Smrcina
Yes, indeed. Hubbard, Greg L wrote:
Congratulations! Thanks for your ongoing dedication... GLH
-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009
list Josh Luthman
The day starts off with +1 awesome. Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX Those who don't understand UNIX are condemned to reinvent it, poorly. --- Henry Spencer
▸
On Tue, Dec 16, 2008 at 10:33 AM, Rich Smrcina <user-cf452ff334e0@xymon.invalid> wrote:
Yes, indeed. Hubbard, Greg L wrote:Congratulations! Thanks for your ongoing dedication... GLH-- Rich Smrcina VM Assist, Inc. Phone: XXX-XXX-XXXX Ans Service: XXX-XXX-XXXX http://www.linkedin.com/in/richsmrcina Catch the WAVV! http://www.wavv.org WAVV 2009 - Orlando, FL - May 15-19, 2009
list L.M.J
▸
On Tue, 16 Dec 2008 16:12:44 +0100, Henrik Storner <user-ce4a2c883f75@xymon.invalid> wrote:
I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.
Great, thanks for the news. Is it safe to compile it and replace the old Hobbit binaries? or is there any cleanest way to upgrade my current Hobbit server? Thanks by advance
list Adam Goryachev
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Henrik Storner wrote:
It is available at the Sourceforge project site, https://sourceforge.net/project/showfiles.php?group_id=128058&package_id=140220&release_id=647612
Any chance of some packages similar to the 4.2.0 ones for debian? Specifically the server package and the client package? BTW, for the debian package maintainer in debian, will this version end up in lenny, or will lenny only have 4.3.0 ? What about debian testing? Will 4.2.2 go there after the current testing -> stable ? Thanks, Adam -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAklH06QACgkQGyoxogrTyiVcJACgzUDh6RalWg1JofqVW97x8UBh M00An3Fklk0RQN2RolJMHS3aI05yl+s7 =j0ku -----END PGP SIGNATURE-----
list Henrik Størner
▸
In <a16736ddb213d7495439d967ea3c0ff8 at imap> L.M.J <user-78bb6d5d9024@xymon.invalid> writes:
On Tue, 16 Dec 2008 16:12:44 +0100, Henrik Storner <user-ce4a2c883f75@xymon.invalid> wrote:I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.
Great, thanks for the news. Is it safe to compile it and replace the old Hobbit binaries? or is there any cleanest way to upgrade my current Hobbit server?
Should work just fine, as long as you configure it the same as you did with the original 4.2.0 sources - same userid, directories etc. Regards, Henrik
list Henrik Størner
▸
In <user-c699666e41aa@xymon.invalid> Adam Goryachev <user-92fd6827f6ae@xymon.invalid> writes:
Henrik Storner wrote:It is available at the Sourceforge project site, https://sourceforge.net/project/showfiles.php?group_id=128058&package_id=140220&release_id=647612
Any chance of some packages similar to the 4.2.0 ones for debian? Specifically the server package and the client package?
I'll have them built and uploaded in a day or two. Regards, Henrik
list Martin Ward
▸
Henrik wrote: In <a16736ddb213d7495439d967ea3c0ff8 at imap> L.M.J <user-78bb6d5d9024@xymon.invalid> writes:On Tue, 16 Dec 2008 16:12:44 +0100, Henrik Storner <user-ce4a2c883f75@xymon.invalid> >wrote:I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.Great, thanks for the news. Is it safe to compile it and replace the >old Hobbit binaries? or is there any cleanest way to upgrade my current >Hobbit server?Should work just fine, as long as you configure it the same as you did with the original 4.2.0 sources - same userid, directories etc.
Could I compile the binaries and simply copy them directly in to the
correct bin/ directories so as to use my current 4.2.0 configs or are
there major changes to the config files?
|\/|artin
*************************************************************************************
The message is intended for the named addressee only and may not be disclosed to or used by anyone else, nor may it be copied in any way.
The contents of this message and its attachments are confidential and may also be subject to legal privilege. If you are not the named addressee and/or have received this message in error, please advise us by e-mailing user-61c7f445d564@xymon.invalid and delete the message and any attachments without retaining any copies.
Internet communications are not secure and COLT does not accept responsibility for this message, its contents nor responsibility for any viruses.
No contracts can be created or varied on behalf of COLT Telecommunications, its subsidiaries or affiliates ("COLT") and any other party by email Communications unless expressly agreed in writing with such other party.
Please note that incoming emails will be automatically scanned to eliminate potential viruses and unsolicited promotional emails. For more information refer to www.colt.net or contact us on +44(0)20 7390 3900.
list L.M.J
Le Tue, 16 Dec 2008 16:47:34 +0000 (UTC),
▸
Henrik "Størner" <user-ce4a2c883f75@xymon.invalid> a écrit :In <a16736ddb213d7495439d967ea3c0ff8 at imap> L.M.J <user-78bb6d5d9024@xymon.invalid> writes:On Tue, 16 Dec 2008 16:12:44 +0100, Henrik Storner <user-ce4a2c883f75@xymon.invalid> wrote:I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.Great, thanks for the news. Is it safe to compile it and replace the old Hobbit binaries? or is there any cleanest way to upgrade my current Hobbit server?Should work just fine, as long as you configure it the same as you did with the original 4.2.0 sources - same userid, directories etc.
Great, gonna check it out soon!
list Henrik Størner
In <user-5d6e7bd49dc5@xymon.invalid> "Ward, Martin" <user-2d33a6eb6a05@xymon.invalid> writes:
Henrik wrote: =20 In <a16736ddb213d7495439d967ea3c0ff8 at imap> L.M.J=20 <user-78bb6d5d9024@xymon.invalid> writes: =20On Tue, 16 Dec 2008 16:12:44 +0100, Henrik Storner <user-ce4a2c883f75@xymon.invalid>=20
▸
wrote:I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.
=20Great, thanks for the news. Is it safe to compile it and replace the=20 old Hobbit binaries? or is there any cleanest way to upgrade=20 my current=20 Hobbit server?=20 Should work just fine, as long as you configure it the same as you did with the original 4.2.0 sources - same userid,=20
▸
directories etc.
Could I compile the binaries and simply copy them directly in to the correct bin/ directories so as to use my current 4.2.0 configs or are there major changes to the config files?
The only config file changes are additions to the hobbitgraph.cfg file (new definitions from BBWin, Devmon and hobbit-perl-client), and the corresponding new items listed in the TEST2RRD and GRAPHS setting in hobbitserver.cfg. So compiling and then copying your binaries over - or just doing a "make install", this will not overwrite your existing config - should work fine. Regards, Henrik
list Peter Welter
One more Hurray for Henrik! Although the year must have been hard for him, medical reasons etc, he managed to produce a whole new release of Hobbit, sorry Xymon (Guess it will take a while for me to get used to ;-) Also a "Thank you" for everyone on the mailing list, for their support by answering questions, supplying patches, suggestions or ideas. This is very good for the community, to see that a product like Xymon is alive! The new release, the new features (f.e. notifications report), including incorporated patches and/or fixes is absolutely worth the upgrade! Merry x-mas to you all, Peter 2008/12/16 Henrik Størner <user-ce4a2c883f75@xymon.invalid>
▸
In <user-5d6e7bd49dc5@xymon.invalid> "Ward, Martin" <user-2d33a6eb6a05@xymon.invalid> writes:Henrik wrote: =20 In <a16736ddb213d7495439d967ea3c0ff8 at imap> L.M.J=20 <user-78bb6d5d9024@xymon.invalid> writes: =20On Tue, 16 Dec 2008 16:12:44 +0100, Henrik Storner <user-ce4a2c883f75@xymon.invalid>=20 wrote:I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.=20Great, thanks for the news. Is it safe to compile it and replace the=20 old Hobbit binaries? or is there any cleanest way to upgrade=20 my current=20 Hobbit server?=20 Should work just fine, as long as you configure it the same as you did with the original 4.2.0 sources - same userid,=20 directories etc.Could I compile the binaries and simply copy them directly in to the correct bin/ directories so as to use my current 4.2.0 configs or are there major changes to the config files?The only config file changes are additions to the hobbitgraph.cfg file (new definitions from BBWin, Devmon and hobbit-perl-client), and the corresponding new items listed in the TEST2RRD and GRAPHS setting in hobbitserver.cfg. So compiling and then copying your binaries over - or just doing a "make install", this will not overwrite your existing config - should work fine. Regards, Henrik
list Adam Goryachev
▸
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Henrik Storner wrote:
I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.
Just wondering, but when comparing my old config to the new config, you have changed the comments line to this: # PORT [LOCAL=addr] [EXLOCAL=addr] [REMOTE=addr] [EXREMOTE=addr] [STATE=state] [EXSTATE=state] [MIN=mincount] [MAX=maxcount] [COLOR=color] [TRACK=id] [TEX T=displaytext] Basically, changed min/max/col to MIN/MAX/COLOR, but further down in the file, the examples still have the old lower case values. Do these need to change to the uppercase between 4.2.0 and 4.2.2, along with col=>COLOR ? or will either work in 4.2.2 but the next version will force the new style / etc ?? Thanks, Adam - -- Adam Goryachev Website Managers Ph: +XX X XXXX XXXX user-eaec2ffb4cbc@xymon.invalid Fax: +XX X XXXX XXXX www.websitemanagers.com.au
▸
-----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAklLLWgACgkQGyoxogrTyiUT+QCfQiP4cn765AHvhh0D4MzJEnTL
A2QAoLQ/n+vaRZjtAMx4ZOBkogqLl0QQ
=GU+u
-----END PGP SIGNATURE-----
list Henrik Størner
▸
In <user-c58e34671a45@xymon.invalid> Adam Goryachev <user-eaec2ffb4cbc@xymon.invalid> writes:
Henrik Storner wrote:I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.
Just wondering, but when comparing my old config to the new config, you have changed the comments line to this: # PORT [LOCAL=addr] [EXLOCAL=addr] [REMOTE=addr] [EXREMOTE=addr] [STATE=state] [EXSTATE=state] [MIN=mincount] [MAX=maxcount] [COLOR=color] [TRACK=id] [TEX T=displaytext]
Basically, changed min/max/col to MIN/MAX/COLOR, but further down in the file, the examples still have the old lower case values. Do these need to change to the uppercase between 4.2.0 and 4.2.2, along with col=>COLOR ? or will either work in 4.2.2 but the next version will force the new style / etc ??
It's case-insensitive, so both will work - now and in future versions.
Regards
Henrik
list Asif Iqbal
I see hobbit 4.2.0 in ubuntu repo and it is keeping some of the cfg
files in /var/run/hobbit dir. The problem with that is when the ubuntu
server reboots it clears the contents of /var/run and then hobbit
complains and fails to restart.
I suggest all the cfg files get put in /etc/hobbit or some other
places as part of pkg installation.
I am also ccing the maintainer list
These are the files where the changes need to be made
root at improvise:~# dpkg -L hobbit | grep -v \.gz | xargs grep
'/var/run/hobbit' | awk -F: '{print $1}' | sort -u
/etc/hobbit/hobbitgraph.cfg
/etc/hobbit/hobbitlaunch.cfg
/etc/hobbit/hobbitserver.cfg
/etc/init.d/hobbit
▸
On Fri, Dec 19, 2008 at 2:07 AM, Henrik Størner <user-ce4a2c883f75@xymon.invalid> wrote:In <user-c58e34671a45@xymon.invalid> Adam Goryachev <user-eaec2ffb4cbc@xymon.invalid> writes:Henrik Storner wrote:I am pleased to announce that Xymon version 4.2.2 is now available from Sourceforge.Just wondering, but when comparing my old config to the new config, you have changed the comments line to this: # PORT [LOCAL=addr] [EXLOCAL=addr] [REMOTE=addr] [EXREMOTE=addr] [STATE=state] [EXSTATE=state] [MIN=mincount] [MAX=maxcount] [COLOR=color] [TRACK=id] [TEX T=displaytext]Basically, changed min/max/col to MIN/MAX/COLOR, but further down in the file, the examples still have the old lower case values. Do these need to change to the uppercase between 4.2.0 and 4.2.2, along with col=>COLOR ? or will either work in 4.2.2 but the next version will force the new style / etc ??It's case-insensitive, so both will work - now and in future versions. Regards Henrik
--
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
list Christoph Berg
Re: Adam Goryachev 2008-12-16 <user-c699666e41aa@xymon.invalid>
▸
Henrik Storner wrote:It is available at the Sourceforge project site, https://sourceforge.net/project/showfiles.php?group_id=128058&package_id=140220&release_id=647612Any chance of some packages similar to the 4.2.0 ones for debian? Specifically the server package and the client package? BTW, for the debian package maintainer in debian, will this version end up in lenny, or will lenny only have 4.3.0 ? What about debian testing? Will 4.2.2 go there after the current testing -> stable ?
Lenny will ship with 4.2.0. There will be 4.2.2 packages in unstable soon, and backports of these to lenny as soon as backports.org opens its doors for lenny packages. I'll also update the 4.3 package in experimental over the next weeks. Christoph -- user-92157dbc91bf@xymon.invalid | http://www.df7cb.de/
list Bryan A Kennedy
Hi. We are running Hobbit v4.2.0 on a Red Hat Ent Linux WS rel 4 server. We have been running it for about two years without any issues (Great tool!). A month and a half ago, the trends graphs stopped graphing. I restart Hobbit/Xymon and the graphs start working for a few hours, then stop. The issue is with the status channel graphs. The memory used by this process starts low as expected, then continues to grow until I restart it again. A process listing of that process shows hobbit 24705 0.0 27.1 1099080 1095804 ? S 03:05 0:00 hobbitd_channel --channel=status --log=/home/hobbit/logs/rrd-status.log hobbitd_rrd --rrddir=/home/hobbit/data/rrd It is using 27.1% of the memory (4GB total memory) and I just restarted Hobbit/Xymon 8 hours ago. I have upgraded the kernel on the server, and tried various debugging options. I have tried removing changes that happened around the time of the graphing stop, but nothing has shown the issue. Looking in the rrd-status.log I do see entries with garbled data 2009-01-21 11:19:11 Bad data in channel, skipping it 2009-01-21 11:19:11 Dropping (more) garbled data 2009-01-21 11:22:35 Bad data in channel, skipping it 2009-01-21 11:22:35 Dropping (more) garbled data I am at a loss as to what the problem is. I do plan an upgrade to Xymon v4.2.2, but wanted to see if I could fix this issue first. Any help would be greatly appreciated. Thank you in advance for your time. Regards, Bryan Kennedy
list Olivier Beau
Hi, Strange. Have few tried removing all the hosts you added in your monitoring in the last 2 months ? (it could be a client sending bad statuses..) Do you have any NCV or external scripts for rrd ? (di you tried disabling those ?) Olivier
▸
On 21/01/2009 18:30, Bryan A Kennedy wrote:Hi. We are running Hobbit v4.2.0 on a Red Hat Ent Linux WS rel 4 server. We have been running it for about two years without any issues (Great tool!). A month and a half ago, the trends graphs stopped graphing. I restart Hobbit/Xymon and the graphs start working for a few hours, then stop. The issue is with the status channel graphs. The memory used by this process starts low as expected, then continues to grow until I restart it again. A process listing of that process shows hobbit 24705 0.0 27.1 1099080 1095804 ? S 03:05 0:00 hobbitd_channel --channel=status --log=/home/hobbit/logs/rrd-status.log hobbitd_rrd --rrddir=/home/hobbit/data/rrd It is using 27.1% of the memory (4GB total memory) and I just restarted Hobbit/Xymon 8 hours ago. I have upgraded the kernel on the server, and tried various debugging options. I have tried removing changes that happened around the time of the graphing stop, but nothing has shown the issue. Looking in the rrd-status.log I do see entries with garbled data 2009-01-21 11:19:11 Bad data in channel, skipping it 2009-01-21 11:19:11 Dropping (more) garbled data 2009-01-21 11:22:35 Bad data in channel, skipping it 2009-01-21 11:22:35 Dropping (more) garbled data I am at a loss as to what the problem is. I do plan an upgrade to Xymon v4.2.2, but wanted to see if I could fix this issue first. Any help would be greatly appreciated. Thank you in advance for your time. Regards, Bryan Kennedy
list Bryan A Kennedy
I have removed most of what has been added recently. I started with the
items that were less default than the standard. This wasn't the fix. I
did remove an external script that is used as well. I will continue to
remove and see if I can find something.
Regards,
Bryan Kennedy
Olivier Beau
<user-c01e948faffb@xymon.invalid
m> To
user-ae9b8668bcde@xymon.invalid
01/21/2009 01:50 cc
PM
Subject
Re: [hobbit] trends graph stop
Please respond to graphing
user-ae9b8668bcde@xymon.invalid
▸
Hi,
Strange.
Have few tried removing all the hosts you added in your monitoring in
the last 2 months ?
(it could be a client sending bad statuses..)
Do you have any NCV or external scripts for rrd ?
(di you tried disabling those ?)
Olivier
On 21/01/2009 18:30, Bryan A Kennedy wrote:Hi. We are running Hobbit v4.2.0 on a Red Hat Ent Linux WS rel 4 server. We have been running it for about two years without any issues (Great tool!). A month and a half ago, the trends graphs stopped graphing. I restart Hobbit/Xymon and the graphs start working for a few hours, then stop. The issue is with the status channel graphs. The memory used by this process starts low as expected, then continues to grow until I restart it again. A process listing of that process shows hobbit 24705 0.0 27.1 1099080 1095804 ? S 03:05 0:00 hobbitd_channel --channel=status --log=/home/hobbit/logs/rrd-status.log hobbitd_rrd --rrddir=/home/hobbit/data/rrd It is using 27.1% of the memory (4GB total memory) and I just restarted Hobbit/Xymon 8 hours ago. I have upgraded the kernel on the server, and tried various debugging options. I have tried removing changes that happened around the time of the graphing stop, but nothing has shown the issue. Looking in the rrd-status.log I do see entries with garbled data 2009-01-21 11:19:11 Bad data in channel, skipping it 2009-01-21 11:19:11 Dropping (more) garbled data 2009-01-21 11:22:35 Bad data in channel, skipping it 2009-01-21 11:22:35 Dropping (more) garbled data I am at a loss as to what the problem is. I do plan an upgrade to Xymon v4.2.2, but wanted to see if I could fix this issue first. Any help would be greatly appreciated. Thank you in advance for your time. Regards, Bryan Kennedy
list Henrik Størner
▸
On Wed, Jan 21, 2009 at 11:30:01AM -0600, Bryan A Kennedy wrote:
Hi. We are running Hobbit v4.2.0 on a Red Hat Ent Linux WS rel 4 server. We have been running it for about two years without any issues (Great tool!). A month and a half ago, the trends graphs stopped graphing. I restart Hobbit/Xymon and the graphs start working for a few hours, then stop.
[snip]
Looking in the rrd-status.log I do see entries with garbled data 2009-01-21 11:19:11 Bad data in channel, skipping it 2009-01-21 11:19:11 Dropping (more) garbled data 2009-01-21 11:22:35 Bad data in channel, skipping it 2009-01-21 11:22:35 Dropping (more) garbled data
This brings memories of a bug that I fixed a while back, but I can see that it has only been fixed in the development version - not in the 4.2.x series. I think this patch - should work for both 4.2.0 and 4.2.2 - will fix your problem. I'll add this for 4.2.3. Regards, Henrik
Attachments (1)
list Bryan A Kennedy
Thank you Henrik. I applied the patch and that fixed the garbled data
messages. We are still working on the graphing issue, but believe we have
found the issue with network settings on our end.
Regards,
Bryan Kennedy
Henrik =?unknown-8bit?Q? St=C3=B8rner?= To <user-ce4a2c883f75@xymon.invalid> user-ae9b8668bcde@xymon.invalid cc 01/22/2009 08:59 AM Subject Re: [hobbit] trends graph stop graphing Please respond to user-ae9b8668bcde@xymon.invalid
▸
On Wed, Jan 21, 2009 at 11:30:01AM -0600, Bryan A Kennedy wrote:Hi. We are running Hobbit v4.2.0 on a Red Hat Ent Linux WS rel 4 server. We have been running it for about two years without any issues (Great tool!). A month and a half ago, the trends graphs stopped graphing. I restart Hobbit/Xymon and the graphs start working for a few hours, then stop.
[snip]
Looking in the rrd-status.log I do see entries with garbled data 2009-01-21 11:19:11 Bad data in channel, skipping it 2009-01-21 11:19:11 Dropping (more) garbled data 2009-01-21 11:22:35 Bad data in channel, skipping it 2009-01-21 11:22:35 Dropping (more) garbled data
This brings memories of a bug that I fixed a while back, but I can see that it has only been fixed in the development version - not in the 4.2.x series. I think this patch - should work for both 4.2.0 and 4.2.2 - will fix your problem. I'll add this for 4.2.3. Regards, Henrik
(See attached file: channelsync.patch)
Attachments (1)