Xymon version 4.3.9 now available

8 messages in this thread

list Henrik Størner · Tue, 24 Jul 2012 18:48:53 +0200 ·

Hi,

hot on the heels of 4.3.8 comes version 4.3.9 - it should be available 
from Sourceforge when you read this.

This version cleans up a couple of issues that arose with the 4.3.8 
release, most notably the problem with "disable until" being broken, and 
some issues with building Xymon - mainly on Solaris boxes (1).

* Fix crash when XYMSRV is undefined but XYMSERVERS is
* Fix error in calculating combo-status messages with
   forward references
* Fix error in disable-until-TIME or disable-until-OK code
* Fix documentation of DURATION in alerts.cfg / xymond_alert so
   it is consistenly listed as being in "minutes".
* Permit explicit use of ">" and ">=" in alerts.cfg
* Permit building without the RRDtool libraries, e.g. for
   a network-tester build, but with trend-graphing disabled.
* Full compiler-warning cleanup
* Various configuration/build-script issues fixed.

NB: Due to the build-script changes, it is necessary to run the 
"configure" command in a clean, freshly-unpacked xymon-4.3.9 directory 
when building this version. You cannot just copy over the Makefile from 
a previous version - if you do, some of the programs will not be built.


Here are the hash values:

MD5:
3f784333de43ffc5783a4c65a7d08456  xymon-4.3.9.tar.gz
8e170caa403d9b69bb52f6e5ac4e9e52  xymon_4.3.9_amd64.deb
c0ade68012b2445b50117d7439a05ec7  xymon-client_4.3.9_amd64.deb
bcabdc0da72a4e574b839f58fc487518  xymon_4.3.9_i386.deb
355caba196250d2ec6bd2a09f9c99f81  xymon-client_4.3.9_i386.deb

SHA-1:
2960ebb130da0ce002ea1866e5ca5d77bff3dd22  xymon-4.3.9.tar.gz
75f54a044d07984f2fc668ecbc699553958808c7  xymon_4.3.9_amd64.deb
d3c08b9e03abc986f8019c1612ff91da0f93f403  xymon-client_4.3.9_amd64.deb
a67f8a75e66cfb0bba2ce275e52cf16ee91838c2  xymon_4.3.9_i386.deb
0ac9ef5226aaa87b9622ba82cb6c917be9931179  xymon-client_4.3.9_i386.deb


Regards,
Henrik


(1) Apparently, the "tr" command on Solaris 10 is incredibly broken when 
you have LANG set to something other than "C".

list Ryan Novosielski · Tue, 24 Jul 2012 15:04:45 -0400 ·

-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1

On 07/24/2012 12:48 PM, Henrik Størner wrote:

Hi,

▸ quoted from Henrik Størner


This version cleans up a couple of issues that arose with the
4.3.8 release, most notably the problem with "disable until" being
broken, and some issues with building Xymon - mainly on Solaris
boxes (1).

(1) Apparently, the "tr" command on Solaris 10 is incredibly broken
when you have LANG set to something other than "C".

I'm told by Oracle (Sun) that this has been broken back to Solaris 2.6
on multibyte locales and that they finally deigned to fix it in 11 but
are hemming and hawing about fixing it in 10. More information for
those interested:

/usr/bin/tr should support multibyte charactes/locales
http://wesunsolve.net/bugid/id/6628310

Comments by another blogger:

A little note about something to be careful of when compiling and
developing applications within a non singlebyte locale (a Unicode or
locale other than "C"). You should always check the man pages of the
utilities you're using in your build process or anywhere else first
before using them. Some of the utilities that are in /usr/bin or /bin
only properly handle singlebyte locales and won't work properly in others.

For example, the "tr" utility in /bin/tr or /usr/bin/tr will fail with
a not-so-helpful message about "bad string" when in reality you've
given it perfectly valid input. This is a result of it not supporting
singlebyte locales. Instead, you will have to use /usr/xpg4/bin/tr or
/usr/xpg6/bin/tr which support multi-byte locales.

Yay Solaris!
- -- 
- ---- _  _ _  _ ___  _  _  _
|Y#| |  | |\/| |  \ |\ |  | |Ryan Novosielski - Sr. Systems Programmer
|$&| |__| |  | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922)
\__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/

iEYEARECAAYFAlAO8c0ACgkQmb+gadEcsb5FNQCglyHE3lMz75kG2LhC9YlWZsuW
O3YAn1XNNZEzYeQULTvaDyovv312dXhH
=7nMk
-----END PGP SIGNATURE-----

list Roland Soderstrom · Tue, 24 Jul 2012 23:18:21 +0000 ·

Got some problem compiling 4.3.8 and now 4.3.9 same problem. 
Using Solaris 10 x86 32bit

MAKE=gmake ./configure.server --rrdinclude /usr/local/rrdtool-1.2.19/include --rrdlib /usr/local/rrdtool-1.2.19/lib
(also tried without the rrd directives)
And then I get 
Checking for RRDtool ...
Not RRDtool 1.0.x, checking for 1.2.x
Compiling with RRDtool works OK
ERROR: Linking with RRDtool fails
RRDtool include- or library-files not found.
These are REQUIRED for trend-graph support in Xymon, but Xymon can
be built without them (e.g. for a network-probe only installation.

root at pxym01:/var/tmp/xymon-4.3.9# pkginfo -l SMCrrdt
   PKGINST:  SMCrrdt
      NAME:  rrdtool
  CATEGORY:  application
      ARCH:  x86
   VERSION:  1.2.19
   BASEDIR:  /usr/local
    VENDOR:  Tobias Oetiker et al
    PSTAMP:  Steve Christensen
  INSTDATE:  Jul 24 2012 10:52
     EMAIL:  user-543a9bbf2067@xymon.invalid
    STATUS:  completely installed
     FILES:      298 installed pathnames
                   1 shared pathnames
                  26 directories
                  26 executables
                8460 blocks used (approx)
root at pxym01:/var/tmp/xymon-4.3.9# ls -la /usr/local/rrdtool-1.2.19/include
-rw-r--r--   1 bin      bin         4887 Mar 25  2007 rrd.h
root at pxym01:/var/tmp/xymon-4.3.9# ls -la /usr/local/rrdtool-1.2.19/lib
-rw-r--r--   1 bin      bin       354030 Mar 25  2007 librrd_th.a
-rwxr-xr-x   1 bin      bin         1150 Mar 25  2007 librrd_th.la
lrwxrwxrwx   1 root     root          18 Jul 24 10:52 librrd_th.so -> librrd_th.so.2.0.8
lrwxrwxrwx   1 root     root          18 Jul 24 10:52 librrd_th.so.2 -> librrd_th.so.2.0.8
-rwxr-xr-x   1 bin      bin       302896 Mar 25  2007 librrd_th.so.2.0.8
-rw-r--r--   1 bin      bin       352960 Mar 25  2007 librrd.a
-rwxr-xr-x   1 bin      bin         1129 Mar 25  2007 librrd.la
lrwxrwxrwx   1 root     root          15 Jul 24 10:52 librrd.so -> librrd.so.2.0.9
lrwxrwxrwx   1 root     root          15 Jul 24 10:52 librrd.so.2 -> librrd.so.2.0.9
-rwxr-xr-x   1 bin      bin       302316 Mar 25  2007 librrd.so.2.0.9
drwxr-xr-x   3 bin      bin            3 Jul 24 10:52 perl
drwxr-xr-x   2 bin      bin            4 Jul 24 10:52 rrdtool
-rwxr-xr-x   1 bin      bin        15456 Mar 25  2007 tclrrd1.2.19.so
root at pxym01:/var/tmp/xymon-4.3.9# ldd /usr/local/rrdtool-1.2.19/lib/librrd.so.2.0.9
        libpng12.so.0 =>         /usr/lib/libpng12.so.0
        libart_lgpl_2.so.2 =>    /usr/lib/libart_lgpl_2.so.2
        libm.so.2 =>     /usr/lib/libm.so.2
        libfreetype.so.6 =>      /usr/local/lib/libfreetype.so.6
        libz.so =>       /usr/lib/libz.so
        libc.so.1 =>     /usr/lib/libc.so.1
        libgcc_s.so.1 =>         /usr/local/lib/libgcc_s.so.1
root at pxym01:/var/tmp/xymon-4.3.9# ldd /usr/local/rrdtool-1.2.19/lib/librrd_th.so.2.0.8
        libpng12.so.0 =>         /usr/lib/libpng12.so.0
        libart_lgpl_2.so.2 =>    /usr/lib/libart_lgpl_2.so.2
        libm.so.2 =>     /usr/lib/libm.so.2
        libfreetype.so.6 =>      /usr/local/lib/libfreetype.so.6
        libz.so =>       /usr/lib/libz.so
        libc.so.1 =>     /usr/lib/libc.so.1
        libgcc_s.so.1 =>         /usr/local/lib/libgcc_s.so.1

Am I missing something?

- Roland

▸ quoted from Henrik Størner

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Henrik Størner
Sent: Wednesday, 25 July 2012 2:49 AM
To: Xymon mailinglist
Subject: [Xymon] Xymon version 4.3.9 now available

Hi,

hot on the heels of 4.3.8 comes version 4.3.9 - it should be available from Sourceforge when you read this.

This version cleans up a couple of issues that arose with the 4.3.8 release, most notably the problem with "disable until" being broken, and some issues with building Xymon - mainly on Solaris boxes (1).

* Fix crash when XYMSRV is undefined but XYMSERVERS is
* Fix error in calculating combo-status messages with
   forward references
* Fix error in disable-until-TIME or disable-until-OK code
* Fix documentation of DURATION in alerts.cfg / xymond_alert so
   it is consistenly listed as being in "minutes".
* Permit explicit use of ">" and ">=" in alerts.cfg
* Permit building without the RRDtool libraries, e.g. for
   a network-tester build, but with trend-graphing disabled.
* Full compiler-warning cleanup
* Various configuration/build-script issues fixed.

NB: Due to the build-script changes, it is necessary to run the "configure" command in a clean, freshly-unpacked xymon-4.3.9 directory when building this version. You cannot just copy over the Makefile from a previous version - if you do, some of the programs will not be built.

Here are the hash values:

MD5:
3f784333de43ffc5783a4c65a7d08456  xymon-4.3.9.tar.gz
8e170caa403d9b69bb52f6e5ac4e9e52  xymon_4.3.9_amd64.deb
c0ade68012b2445b50117d7439a05ec7  xymon-client_4.3.9_amd64.deb
bcabdc0da72a4e574b839f58fc487518  xymon_4.3.9_i386.deb
355caba196250d2ec6bd2a09f9c99f81  xymon-client_4.3.9_i386.deb

SHA-1:
2960ebb130da0ce002ea1866e5ca5d77bff3dd22  xymon-4.3.9.tar.gz
75f54a044d07984f2fc668ecbc699553958808c7  xymon_4.3.9_amd64.deb
d3c08b9e03abc986f8019c1612ff91da0f93f403  xymon-client_4.3.9_amd64.deb
a67f8a75e66cfb0bba2ce275e52cf16ee91838c2  xymon_4.3.9_i386.deb
0ac9ef5226aaa87b9622ba82cb6c917be9931179  xymon-client_4.3.9_i386.deb

Regards,
Henrik

(1) Apparently, the "tr" command on Solaris 10 is incredibly broken when you have LANG set to something other than "C".

list Ryan Novosielski · Tue, 24 Jul 2012 19:44:34 -0400 ·

Try doing sh -x on whatever the build script for rrd is called (take a look in build -- it should be obvious). I found I was missing headers for pcre when I thought I had everything installed. I took a quick glance and don't see any headers.

-- Sent from my Palm Pre

▸ quoted from Roland Soderstrom

On Jul 24, 2012 19:18, Roland Soderstrom &lt;user-0cec9512a49f@xymon.invalid&gt; wrote: 

Got some problem compiling 4.3.8 and now 4.3.9 same problem. 

Using Solaris 10 x86 32bit


MAKE=gmake ./configure.server --rrdinclude /usr/local/rrdtool-1.2.19/include --rrdlib /usr/local/rrdtool-1.2.19/lib

(also tried without the rrd directives)

And then I get 

Checking for RRDtool ...

Not RRDtool 1.0.x, checking for 1.2.x

Compiling with RRDtool works OK

ERROR: Linking with RRDtool fails

RRDtool include- or library-files not found.

These are REQUIRED for trend-graph support in Xymon, but Xymon can

be built without them (e.g. for a network-probe only installation.


root at pxym01:/var/tmp/xymon-4.3.9# pkginfo -l SMCrrdt

   PKGINST:  SMCrrdt

      NAME:  rrdtool

  CATEGORY:  application

      ARCH:  x86

   VERSION:  1.2.19

   BASEDIR:  /usr/local

    VENDOR:  Tobias Oetiker et al

    PSTAMP:  Steve Christensen

  INSTDATE:  Jul 24 2012 10:52

     EMAIL:  user-543a9bbf2067@xymon.invalid

    STATUS:  completely installed

     FILES:      298 installed pathnames

                   1 shared pathnames

                  26 directories

                  26 executables

                8460 blocks used (approx)

root at pxym01:/var/tmp/xymon-4.3.9# ls -la /usr/local/rrdtool-1.2.19/include

-rw-r--r--   1 bin      bin         4887 Mar 25  2007 rrd.h

root at pxym01:/var/tmp/xymon-4.3.9# ls -la /usr/local/rrdtool-1.2.19/lib

-rw-r--r--   1 bin      bin       354030 Mar 25  2007 librrd_th.a

-rwxr-xr-x   1 bin      bin         1150 Mar 25  2007 librrd_th.la


lrwxrwxrwx   1 root     root          18 Jul 24 10:52 librrd_th.so -&gt; librrd_th.so.2.0.8

lrwxrwxrwx   1 root     root          18 Jul 24 10:52 librrd_th.so.2 -&gt; librrd_th.so.2.0.8

▸ quoted from Roland Soderstrom


-rwxr-xr-x   1 bin      bin       302896 Mar 25  2007 librrd_th.so.2.0.8

-rw-r--r--   1 bin      bin       352960 Mar 25  2007 librrd.a

-rwxr-xr-x   1 bin      bin         1129 Mar 25  2007 librrd.la


lrwxrwxrwx   1 root     root          15 Jul 24 10:52 librrd.so -&gt; librrd.so.2.0.9

lrwxrwxrwx   1 root     root          15 Jul 24 10:52 librrd.so.2 -&gt; librrd.so.2.0.9

▸ quoted from Roland Soderstrom


-rwxr-xr-x   1 bin      bin       302316 Mar 25  2007 librrd.so.2.0.9

drwxr-xr-x   3 bin      bin            3 Jul 24 10:52 perl

drwxr-xr-x   2 bin      bin            4 Jul 24 10:52 rrdtool

-rwxr-xr-x   1 bin      bin        15456 Mar 25  2007 tclrrd1.2.19.so

root at pxym01:/var/tmp/xymon-4.3.9# ldd /usr/local/rrdtool-1.2.19/lib/librrd.so.2.0.9


        libpng12.so.0 =&gt;         /usr/lib/libpng12.so.0

        libart_lgpl_2.so.2 =&gt;    /usr/lib/libart_lgpl_2.so.2

        libm.so.2 =&gt;     /usr/lib/libm.so.2

        libfreetype.so.6 =&gt;      /usr/local/lib/libfreetype.so.6

        libz.so =&gt;       /usr/lib/libz.so

        libc.so.1 =&gt;     /usr/lib/libc.so.1

        libgcc_s.so.1 =&gt;         /usr/local/lib/libgcc_s.so.1

root at pxym01:/var/tmp/xymon-4.3.9# ldd /usr/local/rrdtool-1.2.19/lib/librrd_th.so.2.0.8

        libpng12.so.0 =&gt;         /usr/lib/libpng12.so.0

        libart_lgpl_2.so.2 =&gt;    /usr/lib/libart_lgpl_2.so.2

        libm.so.2 =&gt;     /usr/lib/libm.so.2

        libfreetype.so.6 =&gt;      /usr/local/lib/libfreetype.so.6

        libz.so =&gt;       /usr/lib/libz.so

        libc.so.1 =&gt;     /usr/lib/libc.so.1

        libgcc_s.so.1 =&gt;         /usr/local/lib/libgcc_s.so.1

▸ quoted from Roland Soderstrom



Am I missing something?


- Roland


-----Original Message-----

From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Henrik Størner

Sent: Wednesday, 25 July 2012 2:49 AM

To: Xymon mailinglist

Subject: [Xymon] Xymon version 4.3.9 now available


Hi,


hot on the heels of 4.3.8 comes version 4.3.9 - it should be available from Sourceforge when you read this.


This version cleans up a couple of issues that arose with the 4.3.8 release, most notably the problem with "disable until" being broken, and some issues with building Xymon - mainly on Solaris boxes (1).


* Fix crash when XYMSRV is undefined but XYMSERVERS is

* Fix error in calculating combo-status messages with

   forward references

* Fix error in disable-until-TIME or disable-until-OK code

* Fix documentation of DURATION in alerts.cfg / xymond_alert so

   it is consistenly listed as being in "minutes".


* Permit explicit use of "&gt;" and "&gt;=" in alerts.cfg

▸ quoted from Roland Soderstrom


* Permit building without the RRDtool libraries, e.g. for

   a network-tester build, but with trend-graphing disabled.

* Full compiler-warning cleanup

* Various configuration/build-script issues fixed.


NB: Due to the build-script changes, it is necessary to run the "configure" command in a clean, freshly-unpacked xymon-4.3.9 directory when building this version. You cannot just copy over the Makefile from a previous version - if you do, some of the programs will not be built.


Here are the hash values:


MD5:

3f784333de43ffc5783a4c65a7d08456  xymon-4.3.9.tar.gz

8e170caa403d9b69bb52f6e5ac4e9e52  xymon_4.3.9_amd64.deb

c0ade68012b2445b50117d7439a05ec7  xymon-client_4.3.9_amd64.deb

bcabdc0da72a4e574b839f58fc487518  xymon_4.3.9_i386.deb

355caba196250d2ec6bd2a09f9c99f81  xymon-client_4.3.9_i386.deb


SHA-1:

2960ebb130da0ce002ea1866e5ca5d77bff3dd22  xymon-4.3.9.tar.gz

75f54a044d07984f2fc668ecbc699553958808c7  xymon_4.3.9_amd64.deb

d3c08b9e03abc986f8019c1612ff91da0f93f403  xymon-client_4.3.9_amd64.deb

a67f8a75e66cfb0bba2ce275e52cf16ee91838c2  xymon_4.3.9_i386.deb

0ac9ef5226aaa87b9622ba82cb6c917be9931179  xymon-client_4.3.9_i386.deb


Regards,

Henrik


(1) Apparently, the "tr" command on Solaris 10 is incredibly broken when you have LANG set to something other than "C".

list Roland Soderstrom · Wed, 25 Jul 2012 00:08:16 +0000 ·

Ok,

First it seems like the vars do not change the default
+ echo Checking for RRDtool ...
Checking for RRDtool ...
RRDDEF=
RRDINC=
RRDLIB=
PNGLIB=
ZLIB=

But it finds it anyway.
+ test -f /usr/local/rrdtool-1.2.19/include/rrd.h
RRDINC=/usr/local/rrdtool-1.2.19/include
+ test -f /usr/local/rrdtool-1.2.19/lib/librrd.so
RRDLIB=/usr/local/rrdtool-1.2.19/lib
+ test -f /usr/local/rrdtool-1.2.19/lib/librrd.a
RRDLIB=/usr/local/rrdtool-1.2.19/lib
RRDINC=/usr/local/rrdtool-1.2.19/include
+ echo Not RRDtool 1.0.x, checking for 1.2.x
Not RRDtool 1.0.x, checking for 1.2.x
RRDDEF=-DRRDTOOL12
+ gmake -f Makefile.test-rrd clean
+ sed -es@/@_ at g
+ uname -s
OS=SunOS
+ gmake -f Makefile.test-rrd test-compile
RRDINC=-I/usr/local/rrdtool-1.2.19 RRDDEF=-DRRDTOOL12 + sed + -es@/@_ at g uname -s
OS=SunOS

And here it can’t find rrd.h??
test-rrd.c:3:17: rrd.h: No such file or directory
test-rrd.c: In function `main':
test-rrd.c:26: warning: implicit declaration of function `rrd_clear_error'
test-rrd.c:28: warning: implicit declaration of function `rrd_graph'
gmake: *** [test-compile] Error 1
+ test 2 -eq 0
+ echo ERROR: Cannot compile with RRDtool.
ERROR: Cannot compile with RRDtool.
RRDOK=NO
+ gmake -f Makefile.test-rrd test-link
+ test 2 -ne 0
PNGLIB=-L/usr/local/lib -lpng -L/usr/local/lib -lz
+ gmake -f Makefile.test-rrd test-link
+ test 2 -ne 0
PNGLIB=-L/usr/local/lib -lpng -L/usr/local/lib -lz -lm
+ gmake -f Makefile.test-rrd test-link
+ test 2 -eq 0
+ echo ERROR: Linking with RRDtool fails
ERROR: Linking with RRDtool fails
RRDOK=NO
+ gmake -f Makefile.test-rrd clean


-          Roland

▸ quoted from Ryan Novosielski

From: Ryan Novosielski [mailto:user-ae4522577e16@xymon.invalid]
Sent: Wednesday, 25 July 2012 9:45 AM
To: Roland Soderstrom; xymon at xymon.com
Subject: Re: [Xymon] Xymon version 4.3.9 now available

Try doing sh -x on whatever the build script for rrd is called (take a look in build -- it should be obvious). I found I was missing headers for pcre when I thought I had everything installed. I took a quick glance and don't see any headers.
-- Sent from my Palm Pre

On Jul 24, 2012 19:18, Roland Soderstrom <user-0cec9512a49f@xymon.invalid<mailto:user-0cec9512a49f@xymon.invalid>> wrote:

Got some problem compiling 4.3.8 and now 4.3.9 same problem.
Using Solaris 10 x86 32bit

MAKE=gmake ./configure.server --rrdinclude /usr/local/rrdtool-1.2.19/include --rrdlib /usr/local/rrdtool-1.2.19/lib
(also tried without the rrd directives)
And then I get
Checking for RRDtool ...
Not RRDtool 1.0.x, checking for 1.2.x
Compiling with RRDtool works OK
ERROR: Linking with RRDtool fails
RRDtool include- or library-files not found.
These are REQUIRED for trend-graph support in Xymon, but Xymon can
be built without them (e.g. for a network-probe only installation.


root at pxym01:/var/tmp/xymon-4.3.9#<mailto:root at pxym01:/var/tmp/xymon-4.3.9#> pkginfo -l SMCrrdt

▸ quoted from Ryan Novosielski

PKGINST: SMCrrdt
NAME: rrdtool
CATEGORY: application
ARCH: x86
VERSION: 1.2.19
BASEDIR: /usr/local
VENDOR: Tobias Oetiker et al
PSTAMP: Steve Christensen
INSTDATE: Jul 24 2012 10:52


EMAIL: user-543a9bbf2067@xymon.invalid<mailto:user-543a9bbf2067@xymon.invalid>

▸ quoted from Ryan Novosielski

STATUS: completely installed
FILES: 298 installed pathnames
1 shared pathnames
26 directories
26 executables
8460 blocks used (approx)


root at pxym01:/var/tmp/xymon-4.3.9#<mailto:root at pxym01:/var/tmp/xymon-4.3.9#> ls -la /usr/local/rrdtool-1.2.19/include
-rw-r--r-- 1 bin bin 4887 Mar 25 2007 rrd.h
root at pxym01:/var/tmp/xymon-4.3.9#<mailto:root at pxym01:/var/tmp/xymon-4.3.9#> ls -la /usr/local/rrdtool-1.2.19/lib

▸ quoted from Ryan Novosielski

-rw-r--r-- 1 bin bin 354030 Mar 25 2007 librrd_th.a
-rwxr-xr-x 1 bin bin 1150 Mar 25 2007 librrd_th.la
lrwxrwxrwx 1 root root 18 Jul 24 10:52 librrd_th.so -> librrd_th.so.2.0.8
lrwxrwxrwx 1 root root 18 Jul 24 10:52 librrd_th.so.2 -> librrd_th.so.2.0.8
-rwxr-xr-x 1 bin bin 302896 Mar 25 2007 librrd_th.so.2.0.8
-rw-r--r-- 1 bin bin 352960 Mar 25 2007 librrd.a
-rwxr-xr-x 1 bin bin 1129 Mar 25 2007 librrd.la
lrwxrwxrwx 1 root root 15 Jul 24 10:52 librrd.so -> librrd.so.2.0.9
lrwxrwxrwx 1 root root 15 Jul 24 10:52 librrd.so.2 -> librrd.so.2.0.9
-rwxr-xr-x 1 bin bin 302316 Mar 25 2007 librrd.so.2.0.9
drwxr-xr-x 3 bin bin 3 Jul 24 10:52 perl
drwxr-xr-x 2 bin bin 4 Jul 24 10:52 rrdtool
-rwxr-xr-x 1 bin bin 15456 Mar 25 2007 tclrrd1.2.19.so


root at pxym01:/var/tmp/xymon-4.3.9#<mailto:root at pxym01:/var/tmp/xymon-4.3.9#> ldd /usr/local/rrdtool-1.2.19/lib/librrd.so.2.0.9

▸ quoted from Roland Soderstrom

libpng12.so.0 => /usr/lib/libpng12.so.0
libart_lgpl_2.so.2 => /usr/lib/libart_lgpl_2.so.2
libm.so.2 => /usr/lib/libm.so.2
libfreetype.so.6 => /usr/local/lib/libfreetype.so.6
libz.so => /usr/lib/libz.so
libc.so.1 => /usr/lib/libc.so.1
libgcc_s.so.1 => /usr/local/lib/libgcc_s.so.1


root at pxym01:/var/tmp/xymon-4.3.9#<mailto:root at pxym01:/var/tmp/xymon-4.3.9#> ldd /usr/local/rrdtool-1.2.19/lib/librrd_th.so.2.0.8

▸ quoted from Ryan Novosielski

libpng12.so.0 => /usr/lib/libpng12.so.0
libart_lgpl_2.so.2 => /usr/lib/libart_lgpl_2.so.2
libm.so.2 => /usr/lib/libm.so.2
libfreetype.so.6 => /usr/local/lib/libfreetype.so.6
libz.so => /usr/lib/libz.so
libc.so.1 => /usr/lib/libc.so.1
libgcc_s.so.1 => /usr/local/lib/libgcc_s.so.1

Am I missing something?

- Roland


-----Original Message-----
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com]<mailto:[mailto:xymon-bounces at xymon.com]> On Behalf Of Henrik Størner
Sent: Wednesday, 25 July 2012 2:49 AM
To: Xymon mailinglist
Subject: [Xymon] Xymon version 4.3.9 now available

Hi,

hot on the heels of 4.3.8 comes version 4.3.9 - it should be available from Sourceforge when you read this.

This version cleans up a couple of issues that arose with the 4.3.8 release, most notably the problem with "disable until" being broken, and some issues with building Xymon - mainly on Solaris boxes (1).

* Fix crash when XYMSRV is undefined but XYMSERVERS is
* Fix error in calculating combo-status messages with
forward references
* Fix error in disable-until-TIME or disable-until-OK code
* Fix documentation of DURATION in alerts.cfg / xymond_alert so
it is consistenly listed as being in "minutes".
* Permit explicit use of ">" and ">=" in alerts.cfg
* Permit building without the RRDtool libraries, e.g. for
a network-tester build, but with trend-graphing disabled.
* Full compiler-warning cleanup
* Various configuration/build-script issues fixed.

NB: Due to the build-script changes, it is necessary to run the "configure" command in a clean, freshly-unpacked xymon-4.3.9 directory when building this version. You cannot just copy over the Makefile from a previous version - if you do, some of the programs will not be built.


Here are the hash values:

MD5:
3f784333de43ffc5783a4c65a7d08456 xymon-4.3.9.tar.gz
8e170caa403d9b69bb52f6e5ac4e9e52 xymon_4.3.9_amd64.deb
c0ade68012b2445b50117d7439a05ec7 xymon-client_4.3.9_amd64.deb
bcabdc0da72a4e574b839f58fc487518 xymon_4.3.9_i386.deb
355caba196250d2ec6bd2a09f9c99f81 xymon-client_4.3.9_i386.deb

SHA-1:
2960ebb130da0ce002ea1866e5ca5d77bff3dd22 xymon-4.3.9.tar.gz
75f54a044d07984f2fc668ecbc699553958808c7 xymon_4.3.9_amd64.deb
d3c08b9e03abc986f8019c1612ff91da0f93f403 xymon-client_4.3.9_amd64.deb
a67f8a75e66cfb0bba2ce275e52cf16ee91838c2 xymon_4.3.9_i386.deb
0ac9ef5226aaa87b9622ba82cb6c917be9931179 xymon-client_4.3.9_i386.deb


Regards,
Henrik


(1) Apparently, the "tr" command on Solaris 10 is incredibly broken when you have LANG set to something other than "C".

list Henrik Størner · Wed, 25 Jul 2012 09:30:39 +0200 ·

▸ quoted from Roland Soderstrom

On 25-07-2012 01:18, Roland Soderstrom wrote:

Got some problem compiling 4.3.8 and now 4.3.9 same problem.
Using Solaris 10 x86 32bit

MAKE=gmake ./configure.server --rrdinclude /usr/local/rrdtool-1.2.19/include --rrdlib /usr/local/rrdtool-1.2.19/lib
(also tried without the rrd directives)
And then I get
Checking for RRDtool ...
Not RRDtool 1.0.x, checking for 1.2.x
Compiling with RRDtool works OK
ERROR: Linking with RRDtool fails
RRDtool include- or library-files not found.
These are REQUIRED for trend-graph support in Xymon, but Xymon can
be built without them (e.g. for a network-probe only installation.

root at pxym01:/var/tmp/xymon-4.3.9# pkginfo -l SMCrrdt
    PKGINST:  SMCrrdt

Very strange. I downloaded the VM image of Solaris 10/x86 and tried compiling Xymon after adding some of the Sun Freeware packages. There is one problem with the SSL library detection, but nothing with RRDtool. You can see the compile-log here: http://henrik.hswn.dk/solaris10.txt

Regards,
Henrik

PS: The SSL issue can be fixed by changing configure.server: The lines that read

     if test "$SSLINC" != ""; then
         echo "SSLINCDIR = -I$SSLINC"     >>Makefile
     fi

should use $OSSLINC instead of $SSLINC, i.e.

     if test "$OSSLINC" != ""; then
         echo "SSLINCDIR = -I$OSSLINC"     >>Makefile
     fi

list Asif Iqbal · Wed, 25 Jul 2012 05:08:45 -0400 ·

▸ quoted from Henrik Størner

On Wed, Jul 25, 2012 at 3:30 AM, Henrik Størner <user-ce4a2c883f75@xymon.invalid> wrote:

On 25-07-2012 01:18, Roland Soderstrom wrote:

Got some problem compiling 4.3.8 and now 4.3.9 same problem.
Using Solaris 10 x86 32bit

MAKE=gmake ./configure.server --rrdinclude /usr/local/rrdtool-1.2.19/**include
--rrdlib /usr/local/rrdtool-1.2.19/lib
(also tried without the rrd directives)
And then I get
Checking for RRDtool ...
Not RRDtool 1.0.x, checking for 1.2.x
Compiling with RRDtool works OK
ERROR: Linking with RRDtool fails
RRDtool include- or library-files not found.
These are REQUIRED for trend-graph support in Xymon, but Xymon can
be built without them (e.g. for a network-probe only installation.

root at pxym01:/var/tmp/xymon-4.**3.9# pkginfo -l SMCrrdt
    PKGINST:  SMCrrdt

Very strange. I downloaded the VM image of Solaris 10/x86 and tried
compiling Xymon after adding some of the Sun Freeware packages. There is
one problem with the SSL library detection, but nothing with RRDtool. You


can see the compile-log here: http://henrik.hswn.dk/**solaris10.txt<http://henrik.hswn.dk/solaris10.txt>;

▸ quoted from Henrik Størner


Regards,
Henrik

PS: The SSL issue can be fixed by changing configure.server: The lines
that read

    if test "$SSLINC" != ""; then
        echo "SSLINCDIR = -I$SSLINC"     >>Makefile
    fi

should use $OSSLINC instead of $SSLINC, i.e.

    if test "$OSSLINC" != ""; then
        echo "SSLINCDIR = -I$OSSLINC"     >>Makefile
    fi

I just installed it in solaris 10 x86 VM as well. I took slightly different
route, but it compiled pretty clean.

I went with opencsw instead of sunfreeware for my packages.

I tried to stay away from /usr/sfw to avoid risk breaking xymon due to some
solaris patch in the future.

If you run the commands exactly below it should compile fine and your
environment will be under /opt/csw.

Some of the packages below might not be necessary to install, so YMMV

# pkgadd -d http://get.opencsw.org/now
(edit the following two files to add /opt/csw/bin and /opt/csw/sbin in PATH
and SUPATH
# vi /etc/default/login
# vi /etc/default/su
(logout and log back again)
# pkgutil -y -i sudo gmake fping gcc4core pcre libpcre_dev rrdtool librrd4
rrdtool_dev openldap_dev openssl_utils libssl_dev libwrap_dev  (all in one
line - it will take a while to finish)
# useradd -m -d /export/home/xymon -c "Xymon Server" -s /bin/bash xymon
# visudo -f /etc/opt/csw/sudoers.d/xymon
(and add this line
xymon ALL=(ALL) NOPASSWD: /opt/csw/sbin/fping)
# export PATH=$PATH:/usr/ccs/bin
# gunzip xymon-4.3.9.tar.gz
# tar xvf xymon-4.3.9.tar
# cd xymon-4.3.9
# MAKE=gmake ./configure.server --ssllib /opt/csw/lib --sslinclude
/opt/csw/include/openssl
# gmake

That's all.

______________________________**
Xymon at xymon.com<

-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?

list Ryan Novosielski · Wed, 25 Jul 2012 10:08:30 -0400 ·

Actually, if you look there, this may make sense. rrd.h is not in /usr/local/rrdtool-1.2.19, it's in&nbsp;/usr/local/rrdtool-1.2.19/include. The last line seems to have -I being set wrong, doesn't it?

-- Sent from my Palm Pre
On Jul 24, 2012 20:08, Roland Soderstrom &lt;user-0cec9512a49f@xymon.invalid&gt; wrote: 


Ok,
&nbsp;

▸ quoted from Roland Soderstrom

First it seems like the vars do not change the default
+ echo Checking for RRDtool ...
Checking for RRDtool ...
RRDDEF=
RRDINC=
RRDLIB=
PNGLIB=
ZLIB=


&nbsp;

▸ quoted from Roland Soderstrom

But it finds it anyway.
+ test -f /usr/local/rrdtool-1.2.19/include/rrd.h
RRDINC=/usr/local/rrdtool-1.2.19/include
+ test -f /usr/local/rrdtool-1.2.19/lib/librrd.so
RRDLIB=/usr/local/rrdtool-1.2.19/lib
+ test -f /usr/local/rrdtool-1.2.19/lib/librrd.a
RRDLIB=/usr/local/rrdtool-1.2.19/lib
RRDINC=/usr/local/rrdtool-1.2.19/include
+ echo Not RRDtool 1.0.x, checking for 1.2.x
Not RRDtool 1.0.x, checking for 1.2.x
RRDDEF=-DRRDTOOL12
+ gmake -f Makefile.test-rrd clean
+ sed -es@/@_ at g
+ uname -s
OS=SunOS
+ gmake -f Makefile.test-rrd test-compile
RRDINC=-I/usr/local/rrdtool-1.2.19 RRDDEF=-DRRDTOOL12 + sed + -es@/@_ at g uname -s
OS=SunOS


&nbsp;

▸ quoted from Roland Soderstrom

And here it can’t find rrd.h??
test-rrd.c:3:17: rrd.h: No such file or directory
test-rrd.c: In function `main':
test-rrd.c:26: warning: implicit declaration of function `rrd_clear_error'
test-rrd.c:28: warning: implicit declaration of function `rrd_graph'
gmake: *** [test-compile] Error 1
+ test 2 -eq 0
+ echo ERROR: Cannot compile with RRDtool.
ERROR: Cannot compile with RRDtool.
RRDOK=NO
+ gmake -f Makefile.test-rrd test-link
+ test 2 -ne 0
PNGLIB=-L/usr/local/lib -lpng -L/usr/local/lib -lz
+ gmake -f Makefile.test-rrd test-link
+ test 2 -ne 0
PNGLIB=-L/usr/local/lib -lpng -L/usr/local/lib -lz -lm
+ gmake -f Makefile.test-rrd test-link
+ test 2 -eq 0
+ echo ERROR: Linking with RRDtool fails
ERROR: Linking with RRDtool fails
RRDOK=NO
+ gmake -f Makefile.test-rrd clean


&nbsp;
-&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;
Roland
&nbsp;

▸ quoted from Ryan Novosielski

From: Ryan Novosielski [mailto:user-ae4522577e16@xymon.invalid]


Sent: Wednesday, 25 July 2012 9:45 AM

To: Roland Soderstrom; xymon at xymon.com

Subject: Re: [Xymon] Xymon version 4.3.9 now available


&nbsp;

▸ quoted from Roland Soderstrom

Try doing sh -x on whatever the build script for rrd is called (take a look in build -- it should be obvious). I found I was missing headers for pcre when I thought I had everything installed. I took a quick
 glance and don't see any headers.

-- Sent from my Palm Pre


&nbsp;

▸ quoted from Roland Soderstrom



On Jul 24, 2012 19:18, Roland Soderstrom &lt;user-0cec9512a49f@xymon.invalid&gt; wrote:


Got some problem compiling 4.3.8 and now 4.3.9 same problem. 
Using Solaris 10 x86 32bit 


MAKE=gmake ./configure.server --rrdinclude /usr/local/rrdtool-1.2.19/include --rrdlib /usr/local/rrdtool-1.2.19/lib


(also tried without the rrd directives) 
And then I get 
Checking for RRDtool ... 
Not RRDtool 1.0.x, checking for 1.2.x 
Compiling with RRDtool works OK 
ERROR: Linking with RRDtool fails 
RRDtool include- or library-files not found. 
These are REQUIRED for trend-graph support in Xymon, but Xymon can 
be built without them (e.g. for a network-probe only installation. 


root at pxym01:/var/tmp/xymon-4.3.9# pkginfo -l SMCrrdt


PKGINST: SMCrrdt 
NAME: rrdtool 
CATEGORY: application 
ARCH: x86 
VERSION: 1.2.19 
BASEDIR: /usr/local 
VENDOR: Tobias Oetiker et al 
PSTAMP: Steve Christensen 
INSTDATE: Jul 24 2012 10:52 
EMAIL: user-543a9bbf2067@xymon.invalid 
STATUS: completely installed 
FILES: 298 installed pathnames 
1 shared pathnames 
26 directories 
26 executables 
8460 blocks used (approx) 
root at pxym01:/var/tmp/xymon-4.3.9# ls -la /usr/local/rrdtool-1.2.19/include


-rw-r--r-- 1 bin bin 4887 Mar 25 2007 rrd.h 
root at pxym01:/var/tmp/xymon-4.3.9# ls -la /usr/local/rrdtool-1.2.19/lib


-rw-r--r-- 1 bin bin 354030 Mar 25 2007 librrd_th.a 
-rwxr-xr-x 1 bin bin 1150 Mar 25 2007 librrd_th.la 
lrwxrwxrwx 1 root root 18 Jul 24 10:52 librrd_th.so -&gt; librrd_th.so.2.0.8 
lrwxrwxrwx 1 root root 18 Jul 24 10:52 librrd_th.so.2 -&gt; librrd_th.so.2.0.8 
-rwxr-xr-x 1 bin bin 302896 Mar 25 2007 librrd_th.so.2.0.8 
-rw-r--r-- 1 bin bin 352960 Mar 25 2007 librrd.a 
-rwxr-xr-x 1 bin bin 1129 Mar 25 2007 librrd.la 
lrwxrwxrwx 1 root root 15 Jul 24 10:52 librrd.so -&gt; librrd.so.2.0.9 
lrwxrwxrwx 1 root root 15 Jul 24 10:52 librrd.so.2 -&gt; librrd.so.2.0.9 
-rwxr-xr-x 1 bin bin 302316 Mar 25 2007 librrd.so.2.0.9 
drwxr-xr-x 3 bin bin 3 Jul 24 10:52 perl 
drwxr-xr-x 2 bin bin 4 Jul 24 10:52 rrdtool 
-rwxr-xr-x 1 bin bin 15456 Mar 25 2007 tclrrd1.2.19.so 
root at pxym01:/var/tmp/xymon-4.3.9# ldd /usr/local/rrdtool-1.2.19/lib/librrd.so.2.0.9


libpng12.so.0 =&gt; /usr/lib/libpng12.so.0 
libart_lgpl_2.so.2 =&gt; /usr/lib/libart_lgpl_2.so.2 
libm.so.2 =&gt; /usr/lib/libm.so.2 
libfreetype.so.6 =&gt; /usr/local/lib/libfreetype.so.6 
libz.so =&gt; /usr/lib/libz.so 
libc.so.1 =&gt; /usr/lib/libc.so.1 
libgcc_s.so.1 =&gt; /usr/local/lib/libgcc_s.so.1 
root at pxym01:/var/tmp/xymon-4.3.9# ldd /usr/local/rrdtool-1.2.19/lib/librrd_th.so.2.0.8


libpng12.so.0 =&gt; /usr/lib/libpng12.so.0 
libart_lgpl_2.so.2 =&gt; /usr/lib/libart_lgpl_2.so.2 
libm.so.2 =&gt; /usr/lib/libm.so.2 
libfreetype.so.6 =&gt; /usr/local/lib/libfreetype.so.6 
libz.so =&gt; /usr/lib/libz.so 
libc.so.1 =&gt; /usr/lib/libc.so.1 
libgcc_s.so.1 =&gt; /usr/local/lib/libgcc_s.so.1 


Am I missing something? 


- Roland 


-----Original Message----- 
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Henrik Størner 
Sent: Wednesday, 25 July 2012 2:49 AM 
To: Xymon mailinglist 
Subject: [Xymon] Xymon version 4.3.9 now available 


Hi, 


hot on the heels of 4.3.8 comes version 4.3.9 - it should be available from Sourceforge when you read this.


This version cleans up a couple of issues that arose with the 4.3.8 release, most notably the problem with "disable until" being broken, and some issues with building Xymon - mainly on Solaris boxes (1).


* Fix crash when XYMSRV is undefined but XYMSERVERS is 
* Fix error in calculating combo-status messages with 
forward references 
* Fix error in disable-until-TIME or disable-until-OK code 
* Fix documentation of DURATION in alerts.cfg / xymond_alert so 
it is consistenly listed as being in "minutes". 
* Permit explicit use of "&gt;" and "&gt;=" in alerts.cfg 
* Permit building without the RRDtool libraries, e.g. for 
a network-tester build, but with trend-graphing disabled. 
* Full compiler-warning cleanup 
* Various configuration/build-script issues fixed. 


NB: Due to the build-script changes, it is necessary to run the "configure" command in a clean, freshly-unpacked xymon-4.3.9 directory when building this version. You cannot just copy over the Makefile from a previous version - if you do, some of the programs
 will not be built. 


Here are the hash values: 


MD5: 
3f784333de43ffc5783a4c65a7d08456 xymon-4.3.9.tar.gz 
8e170caa403d9b69bb52f6e5ac4e9e52 xymon_4.3.9_amd64.deb 
c0ade68012b2445b50117d7439a05ec7 xymon-client_4.3.9_amd64.deb 
bcabdc0da72a4e574b839f58fc487518 xymon_4.3.9_i386.deb 
355caba196250d2ec6bd2a09f9c99f81 xymon-client_4.3.9_i386.deb 


SHA-1: 
2960ebb130da0ce002ea1866e5ca5d77bff3dd22 xymon-4.3.9.tar.gz 
75f54a044d07984f2fc668ecbc699553958808c7 xymon_4.3.9_amd64.deb 
d3c08b9e03abc986f8019c1612ff91da0f93f403 xymon-client_4.3.9_amd64.deb 
a67f8a75e66cfb0bba2ce275e52cf16ee91838c2 xymon_4.3.9_i386.deb 
0ac9ef5226aaa87b9622ba82cb6c917be9931179 xymon-client_4.3.9_i386.deb 


Regards, 
Henrik 


(1) Apparently, the "tr" command on Solaris 10 is incredibly broken when you have LANG set to something other than "C".

Xymon version 4.3.9 now available 🔗 link

Xymon version 4.3.9 now available