Help: No graphs in xymon
list Usha Donthi
I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Josh Luthman
So you're saying no host in the conn column has a graph? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
▸
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Usha Donthi
That is correct.
▸
-----Original Message-----
From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid]
Sent: Wednesday, March 31, 2010 2:51 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
So you're saying no host in the conn column has a graph?
Josh Luthman
Office: XXX-XXX-XXXX
Direct: XXX-XXX-XXXX
XXXX Wayne St
Suite XXXX
Troy, OH XXXXX
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winston Churchill
On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Josh Luthman
Do the graphs show up correctly in trends? On the conn page does the source show HTML to include the graph (the img src= element that is)?
▸
Josh Luthman
Office: XXX-XXX-XXXX
Direct: XXX-XXX-XXXX
XXXX Wayne St
Suite XXXX
Troy, OH XXXXX
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winston Churchill
On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:That is correct. -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 2:51 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon So you're saying no host in the conn column has a graph? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Usha Donthi
http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom I see tcp.conn.rrd file in data/rrd directory
rrdtool dump tcp.conn.rrd shows last update
<?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">; <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT --> <ds> <name> sec </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 0.022000 </last_ds> <value> 1.3200000000e-01 </value> <unknown_sec> 0 </unknown_sec> </ds>
▸
...
...
-----Original Message-----
From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid]
Sent: Wednesday, March 31, 2010 3:13 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
Do the graphs show up correctly in trends?
On the conn page does the source show HTML to include the graph (the
img src= element that is)?
Josh Luthman
Office: XXX-XXX-XXXX
Direct: XXX-XXX-XXXX
XXXX Wayne St
Suite XXXX
Troy, OH XXXXX
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winston Churchill
On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:That is correct. -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 2:51 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon So you're saying no host in the conn column has a graph? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Josh Luthman
That host won't work for anyone not using your DNS server so we can't look. So the data is there and it appears as though it is updating, is the image making it to the HTML page? I've not seen this issue as long as install correctly.
▸
Josh Luthman
Office: XXX-XXX-XXXX
Direct: XXX-XXX-XXXX
XXXX Wayne St
Suite XXXX
Troy, OH XXXXX
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winston Churchill
On Wed, Mar 31, 2010 at 6:20 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom I see tcp.conn.rrd file in data/rrd directory > rrdtool dump tcp.conn.rrd shows last update <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">; <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT --> <ds> <name> sec </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 0.022000 </last_ds> <value> 1.3200000000e-01 </value> <unknown_sec> 0 </unknown_sec> </ds> ... ... -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 3:13 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Do the graphs show up correctly in trends? On the conn page does the source show HTML to include the graph (the img src= element that is)? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:That is correct. -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 2:51 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon So you're saying no host in the conn column has a graph? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Usha Donthi
source html page - <table summary="tcp:conn Graph"><tr><td><A HREF="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&action=menu"><IMG BORDER=0 SRC="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=view" ALT="hobbit graph tcp:conn"></A></td><td> <td align="left" valign="top"> <a href="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom"> <img src="/xymon/gifs/zoom.gif" border=0 alt="Zoom graph" style='padding: 3px'> </a> </td></tr></table>
▸
-----Original Message----- From: Usha Donthi [mailto:user-243c31f4439c@xymon.invalid] Sent: Wednesday, March 31, 2010 3:21 PM To: user-ae9b8668bcde@xymon.invalid Subject: RE: [hobbit] Help: No graphs in xymon http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom I see tcp.conn.rrd file in data/rrd directory
rrdtool dump tcp.conn.rrd shows last update
<?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">; <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT --> <ds> <name> sec </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 0.022000 </last_ds> <value> 1.3200000000e-01 </value> <unknown_sec> 0 </unknown_sec> </ds> ... ... -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 3:13 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Do the graphs show up correctly in trends? On the conn page does the source show HTML to include the graph (the img src= element that is)? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:
That is correct. -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 2:51 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon So you're saying no host in the conn column has a graph? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Josh Luthman
Does <http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=view>; work?
▸
Josh Luthman
Office: XXX-XXX-XXXX
Direct: XXX-XXX-XXXX
XXXX Wayne St
Suite XXXX
Troy, OH XXXXX
“Success is not final, failure is not fatal: it is the courage to
continue that counts.”
--- Winston Churchill
On Wed, Mar 31, 2010 at 6:35 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:source html page - <table summary="tcp:conn Graph"><tr><td><A HREF="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&action=menu"><IMG BORDER=0 SRC="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=view" ALT="hobbit graph tcp:conn"></A></td><td> <td align="left" valign="top"> <a href="/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom"> <img src="/xymon/gifs/zoom.gif" border=0 alt="Zoom graph" style='padding: 3px'> </a> </td></tr></table> -----Original Message----- From: Usha Donthi [mailto:user-243c31f4439c@xymon.invalid] Sent: Wednesday, March 31, 2010 3:21 PM To: user-ae9b8668bcde@xymon.invalid Subject: RE: [hobbit] Help: No graphs in xymon http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=selzoom I see tcp.conn.rrd file in data/rrd directory > rrdtool dump tcp.conn.rrd shows last update <?xml version="1.0" encoding="utf-8"?> <!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">; <!-- Round Robin Database Dump --><rrd> <version> 0003 </version> <step> 300 </step> <!-- Seconds --> <lastupdate> 1270073706 </lastupdate> <!-- 2010-03-31 15:15:06 PDT --> <ds> <name> sec </name> <type> GAUGE </type> <minimal_heartbeat> 600 </minimal_heartbeat> <min> 0.0000000000e+00 </min> <max> NaN </max> <!-- PDP Status --> <last_ds> 0.022000 </last_ds> <value> 1.3200000000e-01 </value> <unknown_sec> 0 </unknown_sec> </ds> ... ... -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 3:13 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Do the graphs show up correctly in trends? On the conn page does the source show HTML to include the graph (the img src= element that is)? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 6:04 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:That is correct. -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Wednesday, March 31, 2010 2:51 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon So you're saying no host in the conn column has a graph? Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill On Wed, Mar 31, 2010 at 5:44 PM, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I am very new to Xymon so bear with me. I am looking into a problem on Xymon 4.2.2. on linux with no luck. Looking for some hints on how to proceed. Graphs show up only in trends column but not in its own column. This is not a custom graph that I am trying to create but the standard setup by Xymon installation e.g., cpu, memory, disk etc. Only cpu has a graph but not any other Columns. When I look in rrd directory I see la.rrd ( for cpu ) and multiple rrd for disk disk,tmp.rrd, disk,var.rrd, disk,root.rrd. So I see 3 magnifying glass on disk page with no graphs to go with it. Any help appreciated, Usha Donthi
list Stef Coene
On Thursday 01 April 2010, Josh Luthman wrote:
Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=green&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef
list Usha Donthi
When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html>
▸
-----Original Message-----
From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid]
Sent: Thursday, April 01, 2010 12:16 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
On Thursday 01 April 2010, Josh Luthman wrote:Does
Can you open the page in a browser? http://csbu-bldsrv-09/xymon-
cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57
6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree
n&graph=hourly&action=view
▸
This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef
list Josh Luthman
Put quotes around the URL.
▸
On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html> -----Original Message----- From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid] Sent: Thursday, April 01, 2010 12:16 AM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon On Thursday 01 April 2010, Josh Luthman wrote:DoesCan you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Usha Donthi
I see a permission denied now - Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied). BTW, if I remove the &nostale on the web browser I can see the graph
▸
-----Original Message-----
From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid]
Sent: Friday, April 02, 2010 3:08 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
Put quotes around the URL.
On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html> -----Original Message----- From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid] Sent: Thursday, April 01, 2010 12:16 AM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon On Thursday 01 April 2010, Josh Luthman wrote:DoesCan you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Josh Luthman
My guess is an Apache config problem.
▸
On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I see a permission denied now - Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied). BTW, if I remove the &nostale on the web browser I can see the graph -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Friday, April 02, 2010 3:08 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Put quotes around the URL. On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html> -----Original Message----- From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid] Sent: Thursday, April 01, 2010 12:16 AM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon On Thursday 01 April 2010, Josh Luthman wrote:DoesCan you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Usha Donthi
Thanks I will take a look in Apache config area.
▸
-----Original Message-----
From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid]
Sent: Friday, April 02, 2010 3:27 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I see a permission denied now - Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied). BTW, if I remove the &nostale on the web browser I can see the graph -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Friday, April 02, 2010 3:08 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Put quotes around the URL. On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html> -----Original Message----- From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid] Sent: Thursday, April 01, 2010 12:16 AM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon On Thursday 01 April 2010, Josh Luthman wrote:DoesCan you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Usha Donthi
Apache configuration looks okay. Does anyone know where is the process trying to write to?
Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied).
-Usha
▸
-----Original Message-----
From: Usha Donthi [mailto:user-243c31f4439c@xymon.invalid]
Sent: Friday, April 02, 2010 3:47 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] Help: No graphs in xymon
Thanks I will take a look in Apache config area.
-----Original Message-----
From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid]
Sent: Friday, April 02, 2010 3:27 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I see a permission denied now - Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied). BTW, if I remove the &nostale on the web browser I can see the graph -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Friday, April 02, 2010 3:08 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Put quotes around the URL. On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html> -----Original Message----- From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid] Sent: Thursday, April 01, 2010 12:16 AM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon On Thursday 01 April 2010, Josh Luthman wrote:DoesCan you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Stef Coene
▸
On Saturday 03 April 2010, Usha Donthi wrote:
Apache configuration looks okay. Does anyone know where is the process trying to write to?
Yes, in the directory where you are standing in. Go to /tmp with "cd /tmp" or to your home directory with "cd ~" and try again. Stef
list Benjie Muganzi
Hello there. I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all. Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
list Josh Luthman
There is a mysql script on there that works for me. It must be installed on the client as it reports status.
▸
On 4/3/10, Benjie Muganzi <user-c9c0f809a5f4@xymon.invalid> wrote:Hello there. I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all. Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Ryan Novosielski
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Please do not thread hijack -- this is basic mailing list etiquette. I ignore hijacked threads, in terms of helping the hijacker anyhow.
▸
Benjie Muganzi wrote:Hello there. I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all. Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
- -- ---- _ _ _ _ ___ _ _ _
|Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer II |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST - NJMS Medical Science Bldg - C630 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAku3a2UACgkQmb+gadEcsb4saACfahOyEUsvSiSruPEPwHBWHLbA p2QAn0h/Kup+UG1dE5uKhIEFhkk9BXMB =hqPI -----END PGP SIGNATURE-----
list Josh Luthman
Not a big fan of the double post either...
▸
Josh Luthman
Office: XXX-XXX-XXXX
Direct: XXX-XXX-XXXX
XXXX Wayne St
Suite XXXX
Troy, OH XXXXX
“Success is not final, failure is not fatal: it is the courage to continue
that counts.”
--- Winston Churchill
On Sat, Apr 3, 2010 at 12:23 PM, Ryan Novosielski <user-ae4522577e16@xymon.invalid>wrote:
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Please do not thread hijack -- this is basic mailing list etiquette. I ignore hijacked threads, in terms of helping the hijacker anyhow. Benjie Muganzi wrote:Hello there. I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all. Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?- -- ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer II |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST - NJMS Medical Science Bldg - C630 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAku3a2UACgkQmb+gadEcsb4saACfahOyEUsvSiSruPEPwHBWHLbA p2QAn0h/Kup+UG1dE5uKhIEFhkk9BXMB =hqPI -----END PGP SIGNATURE-----
list Ryan Novosielski
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 He probably got dinged for thread hijacking and went back and did it correctly, which I guess is forgivable. Josh Luthman wrote:
Not a big fan of the double post either... On Sat, Apr 3, 2010 at 12:23 PM, Ryan Novosielski <user-ae4522577e16@xymon.invalid
▸
<mailto:user-ae4522577e16@xymon.invalid>> wrote: Please do not thread hijack -- this is basic mailing list etiquette. I ignore hijacked threads, in terms of helping the hijacker anyhow. Benjie Muganzi wrote:Hello there.I have installed xymon version 4.3.0.0 beta2 on Suse Enterprise 10. I want to use it monitor Oracle and Mysql databases. I have tried to use the *hobbit-perl-client* scripts but they all seem not to work at all.Could anyone be having a *step by step manual* on installing the script and they help me out? Am really a newbie at scripting in linux. Why do most of deadcat scripts require bbdef.sh file which is missing in my xymon installation?
- -- ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Systems Programmer II |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/CST - NJMS Medical Science Bldg - C630 -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
iEYEARECAAYFAku3bVMACgkQmb+gadEcsb4mSgCgwQTgZosxvFMryILOZP81DwFy
aQ4An2TB704w2veMBOgZa2c8g3mNTrXg
=4BbQ
-----END PGP SIGNATURE-----
list Usha Donthi
I still have the problem. One thing I observe is - if I remove the &nostale& from http://.... path , the graph is displayed Is there something I Need to do during Xymon setup or change in hobbitgraph.cfg file?
▸
-----Original Message-----
From: Usha Donthi [mailto:user-243c31f4439c@xymon.invalid]
Sent: Friday, April 02, 2010 3:47 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] Help: No graphs in xymon
Thanks I will take a look in Apache config area.
-----Original Message-----
From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid]
Sent: Friday, April 02, 2010 3:27 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I see a permission denied now - Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied). BTW, if I remove the &nostale on the web browser I can see the graph -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Friday, April 02, 2010 3:08 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Put quotes around the URL. On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html> -----Original Message----- From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid] Sent: Thursday, April 01, 2010 12:16 AM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon On Thursday 01 April 2010, Josh Luthman wrote:DoesCan you open the page in a browser? http://csbu-bldsrv-09/xymon- cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_width=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&color=gree n&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Ryan Jay Lapuz
Hi Usha, Have you found a solution on this problem? Co'z I'm having the same issue. Here's my Xymon server info: Xymon 4.3.0 beta 2 CentOS release 5.4 (Final) rrdtool-1.4.4-1 Thanks and regards, Ryan
▸
-----Original Message-----
From: Usha Donthi [mailto:user-243c31f4439c@xymon.invalid]
Sent: Tuesday, April 06, 2010 2:25 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] Help: No graphs in xymon
I still have the problem. One thing I observe is - if I remove the &nostale& from http://.... path , the graph is displayed Is there something I Need to do during Xymon setup or change in hobbitgraph.cfg file?
-----Original Message-----
From: Usha Donthi [mailto:user-243c31f4439c@xymon.invalid]
Sent: Friday, April 02, 2010 3:47 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: RE: [hobbit] Help: No graphs in xymon
Thanks I will take a look in Apache config area.
-----Original Message-----
From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid]
Sent: Friday, April 02, 2010 3:27 PM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Help: No graphs in xymon
My guess is an Apache config problem.
On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:I see a permission denied now - Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... 200 OK Length: unspecified [text/html] hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom: Permission denied Cannot write to `hobbitgraph.sh?host=adbu-relbld-1&service=tcp:conn&graph_width=576&graph_height=120&disp=adbu-relbld-1&nostale&color=green&graph=hourly&action=selzoom' (Permission denied). BTW, if I remove the &nostale on the web browser I can see the graph -----Original Message----- From: Josh Luthman [mailto:user-4c45a83f15cb@xymon.invalid] Sent: Friday, April 02, 2010 3:08 PM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon Put quotes around the URL. On 4/2/10, Usha Donthi <user-243c31f4439c@xymon.invalid> wrote:When I ran the wget command it errors with nostale: command not found Any idea what it means? --14:46:35-- http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 => `hobbitgraph.sh?host=adbu-relbld-1' Resolving csbu-bldsrv-09... 127.0.0.1 Connecting to csbu-bldsrv-09|127.0.0.1|:80... connected. HTTP request sent, awaiting response... [6] 12452 [7] 12454 [8] 12455 [2] Done service=tcp:conn [3] Done graph_width=576 [4] Done graph_height=120 [5] Done disp=adbu%2drelbld%2d1 [xymon at csbu-bldsrv-09 ~]$ -bash: nostale: command not found 200 OK 14:46:36 (11.34 MB/s) - `hobbitgraph.sh?host=adbu-relbld-1' saved [107/107] [1] Done wget http://csbu-bldsrv-09/xymon-cgi/hobbitgraph.sh?host=adbu-relbld-1 [6] Exit 127 nostale And the cat on file downloaded say's - <html><head><title>Invalid request</title></head> <body>Invalid request - no host or service</body></html> -----Original Message----- From: Stef Coene [mailto:user-dbffe946c0f4@xymon.invalid] Sent: Thursday, April 01, 2010 12:16 AM To: user-ae9b8668bcde@xymon.invalid Subject: Re: [hobbit] Help: No graphs in xymon On Thursday 01 April 2010, Josh Luthman wrote:DoesCan you open the page in a browser? http://csbu-bldsrv-09/xymon-
cgi/hobbitgraph.sh?host=adburelbld-1&service=tcp:conn&graph_w idth=57 6&graph_height=120&disp=adbu%2drelbld%2d1&nostale&col or=gree
▸
n&graph=hourly&action=view This should be all on 1 line. This is the part after SRC= and it is the url for the image so you can copy it from the source of the html page. If this is not showing anything in the browser, you can use the command wget on your xymon server to download the image on the command line. 'wget http://'; If the file is downloaded, you can do 'cat <file>' to see the content. The problem is that when there is an error in generating the image, some text is returned. This is very confusing for a browser, but with wget you can download the text and take a look at it. Stef-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
-- Josh Luthman Office: XXX-XXX-XXXX Direct: XXX-XXX-XXXX XXXX Wayne St Suite XXXX Troy, OH XXXXX “Success is not final, failure is not fatal: it is the courage to continue that counts.” --- Winston Churchill
list Thomas Körfer
For me it looks like a bug (typo) in hobbitgraph.cgi I changed the "nostale" to "noscale" (because I saw it some where else) and it works. But it works also if you remove the "nostale" parameter ... b.r. T.K.
list Jeremy Laidman
▸
On Wed, Feb 29, 2012 at 11:36 PM, Körfer, Thomas <user-806b2d0735cc@xymon.invalid> wrote:
For me it looks like a bug (typo) in hobbitgraph.cgi I changed the „nostale“ to „noscale“ (because I saw it some where else) and it works.
This is not a typo. The "nostale" option tells hobbitgraph to show RRD files older than 86400 seconds (24 hours), where normally it doesn't show stale RRD files. If this change makes your graphs appear, then your RRD files might be old. J
list Thomas Körfer
No, my graphs are up to date. They are the same as on the "Trends" page. But it seems to be a bug in hobbitgraph, because it is only showing graphs without the "nostale" option. Interesting: On the "Trends" page the graphs are generated without the "nostale" option, and they are visible. But on other pages (CPU, MEM, DISK, f.e.) they are generated with the "nostale" option and are not visible. b.r. T.K.
▸
-----Ursprüngliche Nachricht-----
Von: Jeremy Laidman [mailto:user-71895fb2e44c@xymon.invalid]
Gesendet: Donnerstag, 1. März 2012 01:32
An: Körfer, Thomas
Cc: xymon at xymon.com
Betreff: Re: [Xymon] [hobbit] Help: No graphs in xymon
On Wed, Feb 29, 2012 at 11:36 PM, Körfer, Thomas <user-806b2d0735cc@xymon.invalid> wrote:For me it looks like a bug (typo) in hobbitgraph.cgi I changed the "nostale" to "noscale" (because I saw it some where else) and it works.
This is not a typo. The "nostale" option tells hobbitgraph to show RRD files older than 86400 seconds (24 hours), where normally it doesn't show stale RRD files. If this change makes your graphs appear, then your RRD files might be old. J
list Thomas Körfer
No, my graphs are up to date. They are the same as on the "Trends" page. But it seems to be a bug in hobbitgraph, because it is only showing graphs without the "nostale" option. Interesting: On the "Trends" page the graphs are generated without the "nostale" option, and they are visible. But on other pages (CPU, MEM, DISK, f.e.) they are generated with the "nostale" option and are not visible. b.r. T.K. -----Ursprüngliche Nachricht----- Von: Jeremy Laidman [mailto:user-71895fb2e44c@xymon.invalid] Gesendet: Donnerstag, 1. März 2012 01:32 An: Körfer, Thomas Cc: xymon at xymon.com Betreff: Re: [Xymon] [hobbit] Help: No graphs in xymon On Wed, Feb 29, 2012 at 11:36 PM, Körfer, Thomas <user-806b2d0735cc@xymon.invalid> wrote:
For me it looks like a bug (typo) in hobbitgraph.cgi I changed the "nostale" to "noscale" (because I saw it some where else) and it works.
This is not a typo. The "nostale" option tells hobbitgraph to show RRD files older than 86400 seconds (24 hours), where normally it doesn't show stale RRD files. If this change makes your graphs appear, then your RRD files might be old. J