Xymon Mailing List Archive search

GRAPHS are empty

6 messages in this thread

list Asif Iqbal · Mon, 28 Mar 2005 09:37:56 -0500 · 
Hi All

I am not sure if I missed something but, ever since I upgraded to RC6
last Fri, I do not see the graphs getting populated anymore.

Here is how my [bbdisplay] section looks like

[bbdisplay]
        ENVFILE /export/home/hobbit/server/etc/hobbitserver.cfg
        NEEDS hobbitd
        GROUP generators
        CMD bbgen --hobbitd --recentgifs --pagetitle-links --maxrows=12
--pagetext-headings --no-underline- headings --ignorecolumns=maint --subpagecolumns=2 --report --rss
--rsslimit=yellow
        LOGFILE $BBSERVERLOGS/bb-display.log
        INTERVAL 1m

LARRDCOLUMN="trends" in my hobbitserver.cfg file

My larrd-status.log file did not get updated since Mar 25 12:15 EST

I am tempted to add --larrd in the bbgen CMD

Any suggestions?

-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
"..there are two kinds of people: those who work and those who take the credit...try
 to be in the first group;...less competition there."  - Indira Gandhi
list Henrik Størner · Mon, 28 Mar 2005 17:29:42 +0200 ·
▸ quoted from Asif Iqbal
On Mon, Mar 28, 2005 at 09:37:56AM -0500, Asif Iqbal wrote:
Hi All

I am not sure if I missed something but, ever since I upgraded to RC6
last Fri, I do not see the graphs getting populated anymore.
If you installed the post-RC6 patch, back it out and install the new
one I posted a message about earlier today instead. It's at the usual
place: http://www.hswn.dk/beta/
▸ quoted from Asif Iqbal


[bbdisplay]
        ENVFILE /export/home/hobbit/server/etc/hobbitserver.cfg
        NEEDS hobbitd
        GROUP generators
        CMD bbgen --hobbitd --recentgifs --pagetitle-links --maxrows=12
--pagetext-headings --no-underline- headings --ignorecolumns=maint --subpagecolumns=2 --report --rss
--rsslimit=yellow
        LOGFILE $BBSERVERLOGS/bb-display.log
        INTERVAL 1m

LARRDCOLUMN="trends" in my hobbitserver.cfg file

My larrd-status.log file did not get updated since Mar 25 12:15 EST

I am tempted to add --larrd in the bbgen CMD
That won't do you any good, since that option has been dropped from
bbgen.


Regards,
Henrik
list Asif Iqbal · Mon, 28 Mar 2005 11:14:29 -0500 ·
▸ quoted from Henrik Størner
On Mon, Mar 28, 2005 at 05:29:42PM, Henrik Stoerner wrote:
On Mon, Mar 28, 2005 at 09:37:56AM -0500, Asif Iqbal wrote:
Hi All

I am not sure if I missed something but, ever since I upgraded to RC6
last Fri, I do not see the graphs getting populated anymore.
If you installed the post-RC6 patch, back it out and install the new
I installed each post-rc6 patches separately before you compiled them
all in one. Should I backout each of those patches separately or just
download the one post-RC6 patch and use that to backup and place the v2
patch?

I am assuming that is the fix.
▸ quoted from Asif Iqbal
one I posted a message about earlier today instead. It's at the usual
place: http://www.hswn.dk/beta/

-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
"..there are two kinds of people: those who work and those who take the credit...try
 to be in the first group;...less competition there."  - Indira Gandhi
list Henrik Størner · Mon, 28 Mar 2005 16:45:01 +0000 (UTC) ·
▸ quoted from Asif Iqbal
In <user-71fd88b2c3bb@xymon.invalid> Asif Iqbal <user-c8222abeff59@xymon.invalid> writes:

On Mon, Mar 28, 2005 at 05:29:42PM, Henrik Stoerner wrote:
On Mon, Mar 28, 2005 at 09:37:56AM -0500, Asif Iqbal wrote:
Hi All

I am not sure if I missed something but, ever since I upgraded to RC6
last Fri, I do not see the graphs getting populated anymore.
If you installed the post-RC6 patch, back it out and install the new
I installed each post-rc6 patches separately before you compiled them
all in one. Should I backout each of those patches separately or just
download the one post-RC6 patch and use that to backup and place the v2
patch?
I think the safest solution is to just grab the original tar-file,
unpack it and apply the post-RC6 patch on top of that.

You can copy the top-level Makefile over to skip the configure-step.


Regards,
Henrik
list Asif Iqbal · Mon, 28 Mar 2005 13:51:25 -0500 ·
▸ quoted from Henrik Størner
On Mon, Mar 28, 2005 at 04:45:01PM, Henrik Storner wrote:
[...]
I think the safest solution is to just grab the original tar-file,
unpack it and apply the post-RC6 patch on top of that.
Did that. I see the timestamp for /var/log/hobbit/larrd-status.log
changed to current date. Will be able to tell in may be next hour if all
GRPAHS are working or not

Thanks
▸ quoted from Asif Iqbal

-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
"..there are two kinds of people: those who work and those who take the credit...try
 to be in the first group;...less competition there."  - Indira Gandhi
list Asif Iqbal · Mon, 28 Mar 2005 14:30:39 -0500 ·
▸ quoted from Asif Iqbal
On Mon, Mar 28, 2005 at 01:51:25PM, Asif Iqbal wrote:
On Mon, Mar 28, 2005 at 04:45:01PM, Henrik Storner wrote:
[...]
I think the safest solution is to just grab the original tar-file,
unpack it and apply the post-RC6 patch on top of that.
Did that. I see the timestamp for /var/log/hobbit/larrd-status.log
changed to current date. Will be able to tell in may be next hour if all
GRPAHS are working or not
It is all good now. Thanks a lot
▸ quoted from Asif Iqbal
-- 
Asif Iqbal
PGP Key: 0xE62693C5 KeyServer: pgp.mit.edu
"..there are two kinds of people: those who work and those who take the credit...try
 to be in the first group;...less competition there."  - Indira Gandhi