get server serial no in xymon
list Yadvendra Kushwaha
Hi Guys Is there any way to pull out server serial no under info section in xymon? Thanks
list Richard L. Hamilton
Not consistently; depends on that system's make, model, and OS. For instance, on my Sun SPARC systems, I can do it on the T5240 (using ipmitool to talk to its system controller; on x86 Sun systems, smbios might be used instead), but not the Sun Blade 100 or Sun Blade 2000 (although if you google solaris sneep, you'll find a tool that will let you manually store it in the eeprom, where it's easily enough retrievable). On PCs, and esp. with the convoluted (to my mind) nature of Windows, to say "your results may vary" is understating it - I looked up a trick for doing that (at command prompt, wmic bios getserialnumber) and it failed. Some systems may not even make the serial number visible to software at all.
▸
On May 24, 2019, at 17:34, Yadvendra kushwaha <user-c1aa0b7f48b5@xymon.invalid> wrote: Hi Guys Is there any way to pull out server serial no under info section in xymon? Thanks
list David Boyer
Yea, what he said! ;-) Dave On Fri, May 24, 2019 at 6:15 PM Richard L. Hamilton <user-af55987f6d56@xymon.invalid>
▸
wrote:
Not consistently; depends on that system's make, model, and OS. For instance, on my Sun SPARC systems, I can do it on the T5240 (using ipmitool to talk to its system controller; on x86 Sun systems, smbios might be used instead), but not the Sun Blade 100 or Sun Blade 2000 (although if you google solaris sneep, you'll find a tool that will let you manually store it in the eeprom, where it's easily enough retrievable). On PCs, and esp. with the convoluted (to my mind) nature of Windows, to say "your results may vary" is understating it - I looked up a trick for doing that (at command prompt, wmic bios getserialnumber) and it failed. Some systems may not even make the serial number visible to software at all.On May 24, 2019, at 17:34, Yadvendra kushwaha <user-c1aa0b7f48b5@xymon.invalid> wrote: Hi Guys Is there any way to pull out server serial no under info section in xymon? Thanks
list Richard L. Hamilton
Having been provoked by the question, I dug further...which still doesn't mean it's always possible! Here's my notes to date:
MacOS (at least 10.6 and later, Intel):
/usr/sbin/ioreg -l|sed -n -e 's/.*IOPlatformSerialNumber" = "\([^"]\{1,\}\)"$/\1/p'
Solaris on T5240 (probably most sun4v, maybe even genuine Sun x86 hardware, that has a system controller
that responds to ipmitool):
ipmitool -H _system_controller_hostname_ -U _user_ -P _password_ sunoem getval /SYS/product_serial_number|sed -e 's/.*alue: *//'
(substitute for the _tokens_ above the actual values described)
note: this requires a version of ipmitool that supports "sunoem"
Linux (no guarantees, since not all PCs can provide software-readable hardware serial number, and Linux runs on lots of systems that aren't PCs):
see https://www.2daygeek.com/how-to-check-system-hardware-manufacturer-model-and-serial-number-in-linux/
(for VMs, the results will depend on the VM hosting software, and may not be obviously meaningful)
Windows:
see https://www.howtogeek.com/294712/how-to-find-your-windows-pcs-serial-number/
Various:
see http://kb.mit.edu/confluence/pages/viewpage.action?pageId=152578725
Solaris x86 on Sun hardware (haven't tried):
see https://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-machine-serial-number-of-solaris-machine-642552/
Comment:
The Macs, which in some respects aren't that amenable to large-scale management (nothing quite equivalent to Windows policies in Active Directory, for example), are by far the best about this, IMO. Probably that's because anyone placing a trouble call will need that info, and with Macs, that might be done by an end user themselves...who would doubtless just use Apple Menu -> About This Mac to do it with the GUI, rather than using the command line at all. Of course, having the serial in the Xymon history is nice if the system is down and won't respond to queries, and your other records are too unreliable to find it easily. But given the difficulty of getting it into Xymon for that or similar purposes on enough physical platforms, I don't see that there's a lot of hope in it for that purpose.
▸
On May 24, 2019, at 19:42, David Boyer <user-a6c09f28d9d2@xymon.invalid> wrote: Yea, what he said! ;-) Dave On Fri, May 24, 2019 at 6:15 PM Richard L. Hamilton <user-af55987f6d56@xymon.invalid <mailto:user-af55987f6d56@xymon.invalid>> wrote: Not consistently; depends on that system's make, model, and OS. For instance, on my Sun SPARC systems, I can do it on the T5240 (using ipmitool to talk to its system controller; on x86 Sun systems, smbios might be used instead), but not the Sun Blade 100 or Sun Blade 2000 (although if you google solaris sneep, you'll find a tool that will let you manually store it in the eeprom, where it's easily enough retrievable). On PCs, and esp. with the convoluted (to my mind) nature of Windows, to say "your results may vary" is understating it - I looked up a trick for doing that (at command prompt, wmic bios getserialnumber) and it failed. Some systems may not even make the serial number visible to software at all.On May 24, 2019, at 17:34, Yadvendra kushwaha <user-c1aa0b7f48b5@xymon.invalid <mailto:user-c1aa0b7f48b5@xymon.invalid>> wrote: Hi Guys Is there any way to pull out server serial no under info section in xymon? Thanks
Xymon at xymon.com <Xymon at xymon.com <
list Bruce Ferrell
On Linux systems (even VMs) dmidecode is a good bet. It works on Macs too, if it's installed and the output is VERY regular and standardized
▸
On 5/24/19 6:14 PM, Richard L. Hamilton wrote:Having been provoked by the question, I dug further...which still doesn't mean it's always possible! Here's my notes to date: MacOS (at least 10.6 and later, Intel): /usr/sbin/ioreg -l|sed -n -e 's/.*IOPlatformSerialNumber" = "\([^"]\{1,\}\)"$/\1/p' Solaris on T5240 (probably most sun4v, maybe even genuine Sun x86 hardware, that has a system controller that responds to ipmitool): ipmitool -H _system_controller_hostname_ -U _user_ -P _password_ sunoem getval /SYS/product_serial_number|sed -e 's/.*alue: *//' (substitute for the _tokens_ above the actual values described) note: this requires a version of ipmitool that supports "sunoem" Linux (no guarantees, since not all PCs can provide software-readable hardware serial number, and Linux runs on lots of systems that aren't PCs): see https://www.2daygeek.com/how-to-check-system-hardware-manufacturer-model-and-serial-number-in-linux/ (for VMs, the results will depend on the VM hosting software, and may not be obviously meaningful) Windows: see https://www.howtogeek.com/294712/how-to-find-your-windows-pcs-serial-number/ Various: see http://kb.mit.edu/confluence/pages/viewpage.action?pageId=152578725 Solaris x86 on Sun hardware (haven't tried): see https://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-machine-serial-number-of-solaris-machine-642552/ Comment: The Macs, which in some respects aren't that amenable to large-scale management (nothing quite equivalent to Windows policies in Active Directory, for example), are by far the best about this, IMO. Probably that's because anyone placing a trouble call will need that info, and with Macs, that might be done by an end user themselves...who would doubtless just use Apple Menu -> About This Mac to do it with the GUI, rather than using the command line at all. Of course, having the serial in the Xymon history is nice if the system is down and won't respond to queries, and your other records are too unreliable to find it easily. But given the difficulty of getting it into Xymon for that or similar purposes on enough physical platforms, I don't see that there's a lot of hope in it for that purpose.On May 24, 2019, at 19:42, David Boyer <user-a6c09f28d9d2@xymon.invalid <mailto:user-a6c09f28d9d2@xymon.invalid>> wrote: Yea, what he said! ;-) Dave On Fri, May 24, 2019 at 6:15 PM Richard L. Hamilton <user-af55987f6d56@xymon.invalid <mailto:user-af55987f6d56@xymon.invalid>> wrote: Not consistently; depends on that system's make, model, and OS. For instance, on my Sun SPARC systems, I can do it on the T5240 (using ipmitool to talk to its system controller; on x86 Sun systems, smbios might be used instead), but not the Sun Blade 100 or Sun Blade 2000 (although if you google solaris sneep, you'll find a tool that will let you manually store it in the eeprom, where it's easily enough retrievable). On PCs, and esp. with the convoluted (to my mind) nature of Windows, to say "your results may vary" is understating it - I looked up a trick for doing that (at command prompt, wmic bios getserialnumber) and it failed. Some systems may not even make the serial number visible to software at all.On May 24, 2019, at 17:34, Yadvendra kushwaha <user-c1aa0b7f48b5@xymon.invalid <mailto:user-c1aa0b7f48b5@xymon.invalid>> wrote: Hi Guys Is there any way to pull out server serial no under info section in xymon? Thanks
list Richard L. Hamilton
Hmm. MacPorts has it (I think homebrew might too, not sure about fink). This worked for me:
dmidecode -t system 2>/dev/null | awk '/Serial Number:/ {print $NF}'
The 2>/dev/null was because it kept spitting out a "Bad address" message, although it otherwise worked fine.
Oh, and the Windows command did work for me once I figured out that the examples I saw were missing a space. It should be
wmic bios get SerialNumber
(although SerialNumber isn't case-sensitive)
▸
On May 24, 2019, at 21:40, Bruce Ferrell <user-24fbf1912cfe@xymon.invalid> wrote: On Linux systems (even VMs) dmidecode is a good bet. It works on Macs too, if it's installed and the output is VERY regular and standardized On 5/24/19 6:14 PM, Richard L. Hamilton wrote:Having been provoked by the question, I dug further...which still doesn't mean it's always possible! Here's my notes to date: MacOS (at least 10.6 and later, Intel): /usr/sbin/ioreg -l|sed -n -e 's/.*IOPlatformSerialNumber" = "\([^"]\{1,\}\)"$/\1/p' Solaris on T5240 (probably most sun4v, maybe even genuine Sun x86 hardware, that has a system controller that responds to ipmitool): ipmitool -H _system_controller_hostname_ -U _user_ -P _password_ sunoem getval /SYS/product_serial_number|sed -e 's/.*alue: *//' (substitute for the _tokens_ above the actual values described) note: this requires a version of ipmitool that supports "sunoem" Linux (no guarantees, since not all PCs can provide software-readable hardware serial number, and Linux runs on lots of systems that aren't PCs): see https://www.2daygeek.com/how-to-check-system-hardware-manufacturer-model-and-serial-number-in-linux/ (for VMs, the results will depend on the VM hosting software, and may not be obviously meaningful) Windows: see https://www.howtogeek.com/294712/how-to-find-your-windows-pcs-serial-number/ Various: see http://kb.mit.edu/confluence/pages/viewpage.action?pageId=152578725 Solaris x86 on Sun hardware (haven't tried): see https://www.linuxquestions.org/questions/solaris-opensolaris-20/how-to-find-machine-serial-number-of-solaris-machine-642552/ Comment: The Macs, which in some respects aren't that amenable to large-scale management (nothing quite equivalent to Windows policies in Active Directory, for example), are by far the best about this, IMO. Probably that's because anyone placing a trouble call will need that info, and with Macs, that might be done by an end user themselves...who would doubtless just use Apple Menu -> About This Mac to do it with the GUI, rather than using the command line at all. Of course, having the serial in the Xymon history is nice if the system is down and won't respond to queries, and your other records are too unreliable to find it easily. But given the difficulty of getting it into Xymon for that or similar purposes on enough physical platforms, I don't see that there's a lot of hope in it for that purpose.On May 24, 2019, at 19:42, David Boyer <user-a6c09f28d9d2@xymon.invalid <mailto:user-a6c09f28d9d2@xymon.invalid>> wrote: Yea, what he said! ;-) Dave On Fri, May 24, 2019 at 6:15 PM Richard L. Hamilton <user-af55987f6d56@xymon.invalid <mailto:user-af55987f6d56@xymon.invalid>> wrote: Not consistently; depends on that system's make, model, and OS. For instance, on my Sun SPARC systems, I can do it on the T5240 (using ipmitool to talk to its system controller; on x86 Sun systems, smbios might be used instead), but not the Sun Blade 100 or Sun Blade 2000 (although if you google solaris sneep, you'll find a tool that will let you manually store it in the eeprom, where it's easily enough retrievable). On PCs, and esp. with the convoluted (to my mind) nature of Windows, to say "your results may vary" is understating it - I looked up a trick for doing that (at command prompt, wmic bios getserialnumber) and it failed. Some systems may not even make the serial number visible to software at all.On May 24, 2019, at 17:34, Yadvendra kushwaha <user-c1aa0b7f48b5@xymon.invalid <mailto:user-c1aa0b7f48b5@xymon.invalid>> wrote: Hi Guys Is there any way to pull out server serial no under info section in xymon? Thanks
list Richard L. Hamilton
▸
On May 24, 2019, at 22:31, Richard L. Hamilton <user-af55987f6d56@xymon.invalid> wrote:
Hmm. MacPorts has it (I think homebrew might too, not sure about fink). This worked for me:
dmidecode -t system 2>/dev/null | awk '/Serial Number:/ {print $NF}'
The 2>/dev/null was because it kept spitting out a "Bad address" message, although it otherwise worked fine.
This works better in case there are spaces in the serial number (there were in my Linux VM's under Parallels on my Macs), and still works on MacOS itself: dmidecode -t 1 2>/dev/null | sed -n -e 's/.*Serial Number: *//p'