TS - red for Printer?

3 messages in this thread

list Tom Schmitt · Tue, 2 Mar 2010 07:49:54 -0700 ·

I watch multiple printers and all are on the same subnet .

I added a 128.170.70.88 called Printer088.

From the command line and my PC I can ping the device:

                [root at monitor1 ~]# ping 128.170.70.88

PING 128.170.70.88 (128.170.70.88) 56(84) bytes of data.

64 bytes from 128.170.70.88: icmp_seq=1 ttl=59 time=1.67 ms

64 bytes from 128.170.70.88: icmp_seq=2 ttl=59 time=1.71 ms

64 bytes from 128.170.70.88: icmp_seq=3 ttl=59 time=1.46 ms

 
--- 128.170.70.88 ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time 2001ms

rtt min/avg/max/mdev = 1.467/1.617/1.713/0.112 ms

[root at monitor1 ~]#

 
I added the device yesterday afternoon to Xymon (running CentOS with
4.3.0-0.beta2).

bb-hosts entry:

                group-compress <h4>Building R</h4>

128.170.70.227  Printer227      # conn

128.170.70.228  Printer228      # conn

128.170.70.88   Printer088      # conn

 
The ICON is RED for the device:

 
Tue Mar 2 07:46:07 2010 conn NOT ok 

 
Service conn on Printer088 is not OK : Host does not respond to ping

 
System unreachable for 201 poll periods (60424 seconds)

 
  128.170.35.103 is unreachable

 
Status unchanged in 16 hours, 47 minutes
Status message received from 128.170.1.151

 
<http://monitor1.csw.l-3com.com/xymon-cgi/hobbitgraph.sh?host=Printer088
&service=tcp:conn&graph_width=576&graph_height=120&disp=Printer088&nosta
le&color=red&graph_start=1267368435&graph_end=1267541235&action=menu> 

 
The IP address that it says in "unreachable" does not have anything
device associated with it either in the bb-hosts or DNS.

Why would this address be part of the test and not the actual IP
address????

 
I have not special characters in the line other than a TAB between the
IP and the device name just like all the other ones?

Firewall rules should not play a part as all are on the same subnet and
I am able to ping the device from the command line.

 
BTW:  I have three systems doing monitoring of this device and all are
the same Xymon release on CentOS 5.3 or 5.4.

            All of them show the exact same type of report.

 
Could there be some corruption somewhere?  What can I do to troubleshoot
Xymon?

 
Thanks,

 
Tom Schmitt

Senior IT Staff - R&D

L-3 Communication Systems West

640 North 2200 West

P.O. Box 16850

Salt Lake City, UT  XXXXX

Phone (XXX) XXX-XXXX

Cell      (XXX) XXX-XXXX

eFax    (XXX) XXX-XXXX

user-9c1ae820b621@xymon.invalid

           \\\\||////

             \ ~  ~ /  

             | @  @ |   

--oOo---(_)---oOo--

Attachments (1)

attachment.png image/png · 28.1 KB

list Larry Barber · Tue, 2 Mar 2010 09:04:52 -0600 ·

It looks like you have a bad DNS entry. Try adding 'testip' to the printer
lines in bb-hosts. This will cause Xymon to use the provided IP address
rather than doing a DNS lookup based on the name.

Thanks,
Larry Barber

▸ quoted from Tom Schmitt


On Tue, Mar 2, 2010 at 8:49 AM, <user-9c1ae820b621@xymon.invalid> wrote:

 I watch multiple printers and all are on the same subnet .

I added a 128.170.70.88 called Printer088.

From the command line and my PC I can ping the device:

                [root at monitor1 ~]# ping 128.170.70.88

PING 128.170.70.88 (128.170.70.88) 56(84) bytes of data.

64 bytes from 128.170.70.88: icmp_seq=1 ttl=59 time=1.67 ms

64 bytes from 128.170.70.88: icmp_seq=2 ttl=59 time=1.71 ms

64 bytes from 128.170.70.88: icmp_seq=3 ttl=59 time=1.46 ms


--- 128.170.70.88 ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time 2001ms

rtt min/avg/max/mdev = 1.467/1.617/1.713/0.112 ms

[root at monitor1 ~]#


I added the device yesterday afternoon to Xymon (running CentOS with
4.3.0-0.beta2).

bb-hosts entry:

                group-compress <h4>Building R</h4>

128.170.70.227  Printer227      # conn

128.170.70.228  Printer228      # conn

128.170.70.88   Printer088      # conn


The ICON is RED for the device:


*Tue Mar 2 07:46:07 2010 conn NOT ok *


Service conn on Printer088 is not OK : Host does not respond to ping


System unreachable for 201 poll periods (60424 seconds)


[image: red] 128.170.35.103 is unreachable

▸ quoted from Tom Schmitt



Status unchanged in 16 hours, 47 minutes
Status message received from 128.170.1.151


[image: hobbitgraph tcp:conn]<http://monitor1.csw.l-3com.com/xymon-cgi/hobbitgraph.sh?host=Printer088&service=tcp:conn&graph_width=576&graph_height=120&disp=Printer088&nostale&color=red&graph_start=1267368435&graph_end=1267541235&action=menu>;

▸ quoted from Tom Schmitt



The IP address that it says in “unreachable” does not have anything device
associated with it either in the bb-hosts or DNS.

Why would this address be part of the test and not the actual IP
address????


I have not special characters in the line other than a TAB between the IP
and the device name just like all the other ones?

Firewall rules should not play a part as all are on the same subnet and I
am able to ping the device from the command line.


BTW:  I have three systems doing monitoring of this device and all are the
same Xymon release on CentOS 5.3 or 5.4.

            All of them show the exact same type of report.


Could there be some corruption somewhere?  What can I do to troubleshoot
Xymon?


*Thanks,*

* *

*Tom Schmitt*

*Senior IT Staff - R&D*

L-3 Communication Systems West

640 North 2200 West

P.O. Box 16850

Salt Lake City, UT  XXXXX


Phone (801) *594-3030*

Cell      (XXX) XXX-XXXX

eFax    (413) *480-6873*

*user-9c1ae820b621@xymon.invalid*

*           **\\\\||////***

*             **\ ~  ~ /  ***

*             **| @  @ |   ***

*--oOo---(_)---oOo--***

list Tom Schmitt · Tue, 2 Mar 2010 08:24:53 -0700 ·

That was it!  Thanks Larry.

There was an old DNS entry!

▸ quoted from Larry Barber


 
Thanks,

 
Tom Schmitt

Senior IT Staff - R&D

L-3 Communication Systems West

640 North 2200 West

P.O. Box 16850

Salt Lake City, UT  XXXXX

Phone (XXX) XXX-XXXX

Cell      (XXX) XXX-XXXX

eFax    (XXX) XXX-XXXX

user-9c1ae820b621@xymon.invalid

           \\\\||////

             \ ~  ~ /  

             | @  @ |   

--oOo---(_)---oOo--

 
From: Larry Barber [mailto:user-6ef9c2864140@xymon.invalid] 
Sent: Tuesday, March 02, 2010 8:05 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] TS - red for Printer?

 
It looks like you have a bad DNS entry. Try adding 'testip' to the
printer lines in bb-hosts. This will cause Xymon to use the provided IP
address rather than doing a DNS lookup based on the name. 

Thanks,
Larry Barber

On Tue, Mar 2, 2010 at 8:49 AM, <user-9c1ae820b621@xymon.invalid> wrote:

I watch multiple printers and all are on the same subnet .

I added a 128.170.70.88 called Printer088.

From the command line and my PC I can ping the device:

                [root at monitor1 ~]# ping 128.170.70.88

PING 128.170.70.88 (128.170.70.88) 56(84) bytes of data.

64 bytes from 128.170.70.88: icmp_seq=1 ttl=59 time=1.67 ms

64 bytes from 128.170.70.88: icmp_seq=2 ttl=59 time=1.71 ms

64 bytes from 128.170.70.88: icmp_seq=3 ttl=59 time=1.46 ms

 
--- 128.170.70.88 ping statistics ---

3 packets transmitted, 3 received, 0% packet loss, time 2001ms

rtt min/avg/max/mdev = 1.467/1.617/1.713/0.112 ms

[root at monitor1 ~]#

 
I added the device yesterday afternoon to Xymon (running CentOS with
4.3.0-0.beta2).

bb-hosts entry:

                group-compress <h4>Building R</h4>

128.170.70.227  Printer227      # conn

128.170.70.228  Printer228      # conn

128.170.70.88   Printer088      # conn

 
The ICON is RED for the device:

 
Tue Mar 2 07:46:07 2010 conn NOT ok 

 
Service conn on Printer088 is not OK : Host does not respond to ping

 
System unreachable for 201 poll periods (60424 seconds)

 
  128.170.35.103 is unreachable

 
Status unchanged in 16 hours, 47 minutes
Status message received from 128.170.1.151

 
<http://monitor1.csw.l-3com.com/xymon-cgi/hobbitgraph.sh?host=Printer088
&service=tcp:conn&graph_width=576&graph_height=120&disp=Printer088&nosta
le&color=red&graph_start=1267368435&graph_end=1267541235&action=menu> 

 
The IP address that it says in "unreachable" does not have anything
device associated with it either in the bb-hosts or DNS.

Why would this address be part of the test and not the actual IP
address????

 
I have not special characters in the line other than a TAB between the
IP and the device name just like all the other ones?

Firewall rules should not play a part as all are on the same subnet and
I am able to ping the device from the command line.

 
BTW:  I have three systems doing monitoring of this device and all are
the same Xymon release on CentOS 5.3 or 5.4.

            All of them show the exact same type of report.

 
Could there be some corruption somewhere?  What can I do to troubleshoot
Xymon?

 
Thanks,

 
Tom Schmitt

Senior IT Staff - R&D

L-3 Communication Systems West

640 North 2200 West

P.O. Box 16850

Salt Lake City, UT  XXXXX

Phone (XXX) XXX-XXXX

Cell      (XXX) XXX-XXXX

eFax    (XXX) XXX-XXXX

user-9c1ae820b621@xymon.invalid

           \\\\||////

             \ ~  ~ /  

             | @  @ |   

--oOo---(_)---oOo--

TS - red for Printer? 🔗 link

TS - red for Printer?