Xymon Mailing List Archive search

xymonpsclient CPU utilisation graph

7 messages in this thread

list Ron Cohen · Tue, 21 Jul 2020 14:14:20 +0100 ·

Hi

I'm sure it is not the first time this issue was raised. How to get the CPU percentage utilisation graph with powershell client?

Did some search, and could only find very old posts related to the bbclient, but nothing newer. help, please?

Ron

list Kris Springer · Tue, 21 Jul 2020 07:43:52 -0600 · 
The 'XymonPSClient' does what you're asking by default.
https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/
https://krisspringer.com/posts/xymon-ps-client.php

Thank You,
Systems Admin
I/O Network Administration
user-a65af99e49c9@xymon.invalid
https://www.ionetworkadmin.com
▸ quoted from Ron Cohen

On 7/21/20 7:14 AM, Ron Cohen wrote:
Hi

I'm sure it is not the first time this issue was raised. How to get 
the CPU percentage utilisation graph with powershell client?

Did some search, and could only find very old posts related to the 
bbclient, but nothing newer. help, please?

Ron
list Ron Cohen · Tue, 21 Jul 2020 16:47:56 +0100 ·

Hi

it shows load average under the cpu column, and  there's no CPU utilisation in the trends.

cheers

▸ quoted from Kris Springer

On 21/07/2020 14:43, IO Support wrote:
The 'XymonPSClient' does what you're asking by default. 
https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/
https://krisspringer.com/posts/xymon-ps-client.php

Thank You,

Systems Admin

I/O Network Administration

user-a65af99e49c9@xymon.invalid

https://www.ionetworkadmin.com
On 7/21/20 7:14 AM, Ron Cohen wrote:

Hi

I'm sure it is not the first time this issue was raised. How to get the CPU percentage utilisation graph with powershell client?

Did some search, and could only find very old posts related to the bbclient, but nothing newer. help, please?

Ron




Xymon@xymon.com
list Kris Springer · Tue, 21 Jul 2020 10:06:47 -0600 · 
Mine shows the CPU graph in both the CPU column and the Trends section.

Kris Springer
▸ quoted from Ron Cohen

On 7/21/20 9:47 AM, Ron Cohen wrote:
Hi

it shows load average under the cpu column, and? there's no CPU utilisation in the trends.

cheers


On 21/07/2020 14:43, IO Support wrote:
The 'XymonPSClient' does what you're asking by default.
https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/
https://krisspringer.com/posts/xymon-ps-client.php

Thank You,
Systems Admin
I/O Network Administration
user-a65af99e49c9@xymon.invalid
https://www.ionetworkadmin.com
On 7/21/20 7:14 AM, Ron Cohen wrote:
Hi

I'm sure it is not the first time this issue was raised. How to get the CPU percentage utilisation graph with powershell client?

Did some search, and could only find very old posts related to the bbclient, but nothing newer. help, please?

Ron
list Ron Cohen · Tue, 21 Jul 2020 18:04:32 +0100 ·

Hi

Out of the box it does not. It shows load average for both column and trends, using the [la] rrd. Will have to dive into the script to see what it is actually reported. 

cheers

Ron

▸ quoted from Kris Springer


On 21/07/2020 17:06, Kris Springer wrote:
Mine shows the CPU graph in both the CPU column and the Trends section.
Kris Springer
On 7/21/20 9:47 AM, Ron Cohen wrote:

Hi

it shows load average under the cpu column, and  there's no CPU utilisation in the trends.

cheers



On 21/07/2020 14:43, IO Support wrote:
The 'XymonPSClient' does what you're asking by default. 
https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/
https://krisspringer.com/posts/xymon-ps-client.php

Thank You,

Systems Admin

I/O Network Administration

user-a65af99e49c9@xymon.invalid

https://www.ionetworkadmin.com
On 7/21/20 7:14 AM, Ron Cohen wrote:

Hi

I'm sure it is not the first time this issue was raised. How to get the CPU percentage utilisation graph with powershell client?

Did some search, and could only find very old posts related to the bbclient, but nothing newer. help, please?

Ron




Xymon@xymon.com





Xymon@xymon.com
list Zak Beck · Wed, 22 Jul 2020 13:14:50 +0000 · 
I kind of see what you?re saying ? the graph label is ?load average? and although is a percentage, on the graph it?s shown as a value between 0.0 and 1.0 (i.e. divided by 100).

The actual data is not a load average in the Linux sense (where load can exceed the number of CPUs) ? it is a CPU usage percentage taken at the sample time. It?s just the labelling that is off and I believe this is a consequence of code reuse on the server side. I think you?d get the same result with BBWin, i.e. the code has been around unchanged for years.

Zak

From: Xymon <xymon-bounces at xymon.com> On Behalf Of Ron Cohen
Sent: 21 July 2020 18:05
To: Kris Springer <user-c2caa0a7a8d5@xymon.invalid>; xymon <Xymon at xymon.com>
Subject: [External] Re: [Xymon] xymonpsclient CPU utilisation graph

This message is from an EXTERNAL SENDER - be CAUTIOUS, particularly with links and attachments.
▸ quoted from Ron Cohen

Hi
Out of the box it does not. It shows load average for both column and trends, using the [la] rrd. Will have to dive into the script to see what it is actually reported.
cheers
Ron

On 21/07/2020 17:06, Kris Springer wrote:
Mine shows the CPU graph in both the CPU column and the Trends section.


Kris Springer


On 7/21/20 9:47 AM, Ron Cohen wrote:
Hi
it shows load average under the cpu column, and  there's no CPU utilisation in the trends.
cheers


On 21/07/2020 14:43, IO Support wrote:
The 'XymonPSClient' does what you're asking by default.

https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/<https://urldefense.proofpoint.com/v2/url?u=https-3A__sourceforge.net_p_xymon_code_HEAD_tree_sandbox_WinPSClient_&d=DwMDaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=zCVWr9SAWQx4AZuB8UiOHd2bsijpgSQjXnKQwhoMtbk&s=x1ULxeTiZDTiwjr1Dh0-3gbCEUJq7-sBQmx8QjOuVsY&e=>;
https://krisspringer.com/posts/xymon-ps-client.php<https://urldefense.proofpoint.com/v2/url?u=https-3A__krisspringer.com_posts_xymon-2Dps-2Dclient.php&d=DwMDaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=zCVWr9SAWQx4AZuB8UiOHd2bsijpgSQjXnKQwhoMtbk&s=fHdjC8q7lDkUg9P8RhTdBs0hDfpYrcUREIcyNkEzvGA&e=>;


Thank You,

Systems Admin

I/O Network Administration

user-a65af99e49c9@xymon.invalid<mailto:user-a65af99e49c9@xymon.invalid>

https://www.ionetworkadmin.com<https://urldefense.proofpoint.com/v2/url?u=https-3A__www.ionetworkadmin.com&d=DwMDaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=zCVWr9SAWQx4AZuB8UiOHd2bsijpgSQjXnKQwhoMtbk&s=HWG58Mtmg6mu3SDJkbgBhkm60xmAB3zhIOt1Z81mMXI&e=>;
▸ quoted from Ron Cohen
On 7/21/20 7:14 AM, Ron Cohen wrote:
Hi
I'm sure it is not the first time this issue was raised. How to get the CPU percentage utilisation graph with powershell client?
Did some search, and could only find very old posts related to the bbclient, but nothing newer. help, please?
Ron



Xymon at xymon.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DwMDaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=zCVWr9SAWQx4AZuB8UiOHd2bsijpgSQjXnKQwhoMtbk&s=vFQPZiBTepRKSPTVqde03BP7biEgFbo2z69T5LqlKEc&e=>;


Xymon at xymon.com<https://urldefense.proofpoint.com/v2/url?u=http-3A__lists.xymon.com_mailman_listinfo_xymon&d=DwMDaQ&c=eIGjsITfXP_y-DLLX0uEHXJvU8nOHrUK8IrwNKOtkVU&r=S-aLwpx-PHBTBMIG_c2JczRC0SfuZCmsiH9Iams25FI&m=zCVWr9SAWQx4AZuB8UiOHd2bsijpgSQjXnKQwhoMtbk&s=vFQPZiBTepRKSPTVqde03BP7biEgFbo2z69T5LqlKEc&e=>;


This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. Your privacy is important to us. Accenture uses your personal data only in compliance with data protection laws. For further information on how Accenture processes your personal data, please see our privacy statement at https://www.accenture.com/us-en/privacy-policy.

www.accenture.com
list Ron Cohen · Wed, 22 Jul 2020 16:24:47 +0100 ·

thanks, it confirms what I learnt from the code.

I'm writing a small extension to collect the processor, user and privileged stats  as well, since global cpu is not enough to understand what's going on. It won't be an easy task for me to incorporate it into the client, so I choose to do that as extension. I had an arranged marriages forced on me with windows a couple of months ago, and my powershell skills are that old.

▸ quoted from Zak Beck

On 22/07/2020 14:14, Beck, Zak wrote:

I kind of see what you’re saying – the graph label is ‘load average’ and although is a percentage, on the graph it’s shown as a value between 0.0 and 1.0 (i.e. divided by 100).


The actual data is not a load average in the Linux sense (where load can exceed the number of CPUs) – it is a CPU usage percentage taken at the sample time. It’s just the labelling that is off and I believe this is a consequence of code reuse on the server side. I think you’d get the same result with BBWin, i.e. the code has been around unchanged for years.


Zak


From: Xymon On Behalf Of Ron Cohen
Sent: 21 July 2020 18:05
To: Kris Springer ; xymon
Subject: [External] Re: [Xymon] xymonpsclient CPU utilisation graph


This message is from an EXTERNAL SENDER - be CAUTIOUS, particularly with links and attachments.


Hi

Out of the box it does not. It shows load average for both column and trends, using the [la] rrd. Will have to dive into the script to see what it is actually reported. 

cheers

Ron


On 21/07/2020 17:06, Kris Springer wrote:

Mine shows the CPU graph in both the CPU column and the Trends section.

Kris Springer

On 7/21/20 9:47 AM, Ron Cohen wrote:

Hi

it shows load average under the cpu column, and  there's no CPU utilisation in the trends.

cheers



On 21/07/2020 14:43, IO Support wrote:

The 'XymonPSClient' does what you're asking by default. 
https://sourceforge.net/p/xymon/code/HEAD/tree/sandbox/WinPSClient/
https://krisspringer.com/posts/xymon-ps-client.php

Thank You,
Systems Admin
I/O Network Administration
user-a65af99e49c9@xymon.invalid
https://www.ionetworkadmin.com

On 7/21/20 7:14 AM, Ron Cohen wrote:

Hi

I'm sure it is not the first time this issue was raised. How to get the CPU percentage utilisation graph with powershell client?

Did some search, and could only find very old posts related to the bbclient, but nothing newer. help, please?

Ron



Xymon@xymon.com


Xymon@xymon.com



This message is for the designated recipient only and may contain privileged, proprietary, or otherwise confidential information. If you have received it in error, please notify the sender immediately and delete the original. Any other use of the e-mail by you is prohibited. Where allowed by local law, electronic communications with Accenture and its affiliates, including e-mail and instant messaging (including content), may be scanned by our systems for the purposes of information security and assessment of internal compliance with Accenture policy. Your privacy is important to us. Accenture uses your personal data only in compliance with data protection laws. For further information on how Accenture processes your personal data, please see our privacy statement at https://www.accenture.com/us-en/privacy-policy.
______________________________________________________________________________________

www.accenture.com