No Procs Graph? 🔗 link

On Wed, 3 Sep 2008, user-f0b75ba60368@xymon.invalid wrote:

Hi Folks,

I am new to Hobbit and noticed that when you drill down to a device's
procs information, there is no graph but the magnifying glass shows up as
if a graph should be there.  I've looked through so many man pages, wiki
entries, FAQs, etc. trying to figure this out that my head is spinning!
And when I go to the Hobbit demo site and drill down to
http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=voodoo.hswn.dk&SERVICE=procs
and http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=sarge&SERVICE=procs, the
procs graphs don't show up there either.  So, have I been wasting my time
trying to make that graph work or is there some magical trick that a
master is willing to reveal to me?

Any/all help will be appreciated!

Thanks!

Ann

	From: user-f0b75ba60368@xymon.invalid [mailto:user-f0b75ba60368@xymon.invalid] 
	Sent: Wednesday, September 03, 2008 7:08 AM
	To: user-ae9b8668bcde@xymon.invalid
	Subject: [hobbit] No Procs Graph?
	
	
	Hi Folks, 
	
	I am new to Hobbit and noticed that when you drill down to a
device's procs information, there is no graph but the magnifying glass
shows up as if a graph should be there.  I've looked through so many man
pages, wiki entries, FAQs, etc. trying to figure this out that my head
is spinning!  And when I go to the Hobbit demo site and drill down to

the procs graphs don't show up there either.  So, have I been wasting my
time trying to make that graph work or is there some magical trick that
a master is willing to reveal to me? 
	
	Any/all help will be appreciated! 
	
	Thanks! 
	
	Ann

Hi !

  You needs somthing like this in your hobb-client.cfg

PROC firefox 0 -1 TRACK=firefox

http://hswn.dk/hobbit/help/manpages/man5/hobbit-clients.cfg.5.html

The optional TRACK=id setting causes Hobbit to track the number of processes found in an RRD file, and put this into a graph which is shown on the "procs" status display. The id setting is a simple text string which will be used as the legend for the graph, and also as part of the RRD filename. It is recommended that you use only letters and digits for the ID.


Cheers,

        Martin


On Wed, 3 Sep 2008, user-f0b75ba60368@xymon.invalid wrote:

Hi Folks,

I am new to Hobbit and noticed that when you drill down to a device's
procs information, there is no graph but the magnifying glass shows up 
as
if a graph should be there.  I've looked through so many man pages, wiki
entries, FAQs, etc. trying to figure this out that my head is spinning!
And when I go to the Hobbit demo site and drill down to

http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=voodoo.hswn.dk&SERVICE=procs

and http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=sarge&SERVICE=procs, 
the
procs graphs don't show up there either.  So, have I been wasting my 
time
trying to make that graph work or is there some magical trick that a
master is willing to reveal to me?

Any/all help will be appreciated!

Thanks!

Ann

cheers,
 	martin


On Wed, 3 Sep 2008, user-f0b75ba60368@xymon.invalid wrote:

Hi Martin and Greg,

Thanks for the reply/suggestion but I do have the TRACK=<id> in the
hobbit-clients.cfg file.  Below is a snippet of the file:

HOST=wdcacs9.ca.kp.org,silacs9.ssdc.kp.org,coracs9.crdc.kp.org,ndcacs1.nndc.kp.org,ndcacs2.nndc.kp.org
       PROC CSAdmin.exe 1 1 red TRACK=csadmin
       PROC CSAuth.exe 1 1 red TRACK=csauth
       PROC CSDBSync.exe 1 1 red TRACK=csdbsync
       PROC CSLog.exe 1 1 red TRACK=cslog
       PROC CSMon.exe 1 1 red TRACK=csmon
       PROC CSRAdius.exe 1 1 red TRACK=csradius
       PROC CSTacacs.exe 1 1 red TRACK=cstacacs

DEFAULT
       # These are the built-in defaults.
       UP      1h
       LOAD    5.0 10.0
       DISK    * 90 95
       MEMPHYS 100 101
       MEMSWAP 50 80
       MEMACT  90 97

The hosts that I am monitoring are Windows 2003 servers.  I am running
BBwin on those servers in local mode.  Below is the BBwin.cfg file from
one of the servers (this cfg file is the same on all of them):

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<bbwin>
       <setting name="bbdisplay" value="goose.ssdc.kp.org" />
       <!-- <setting name="bbdisplay" value="yoursecondbbdisplay:port"
/>-->
       <!-- BB Pager Part -->
       <!--<setting name="usepager" value="false" />
       <setting name="bbpager" value="yourfirstbbpager" />
       <setting name="bbpager" value="yourfirstbbpager" />
       <setting name="pagerlevels" value="red yellow" /> -->

       <!-- proxy connection settings -->
       <!--
       <setting name="useproxy" value="false" />
       <setting name="proxy" value="[user:password@]host[:port]'/>
       -->

       <!-- bbwin mode local or central -->
       <setting name="mode" value="local" />
       <setting name="configclass" value="win32" />

       <setting name="autoreload" value="true" />
       <setting name="timer" value="5m" />
       <load name="cpu" value="cpu.dll"/>
       <load name="disk" value="disk.dll"/>
       <load name="externals" value="externals.dll"/>
       <load name="filesystem" value="filesystem.dll"/>
       <load name="memory" value="memory.dll"/>
       <load name="msgs" value="msgs.dll"/>
       <load name="procs" value="procs.dll"/>
       <load name="stats" value="stats.dll"/>
       <load name="svcs" value="svcs.dll"/>
       <load name="uptime" value="uptime.dll"/>
       <load name="who" value="who.dll"/>
       <setting name="loglevel" value="3" />
       <setting name="logpath" value="C:\Program
Files\BBWin\logs\BBWin.log"/>
       <!--  If true, the agent will report reporting failures as warning
events -->
       <setting name="logreportfailure" value="false" />
</bbwin>
<cpu>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <setting name="default" warnlevel="90" paniclevel="95" delay="3"
/>
</cpu>
<disk>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <!-- Level can be given by % or size unit mb, gb, tb -->
       <setting name="default" warnlevel="85%" paniclevel="95%" />
       <!-- custom rules examples
       <setting name="C" warnlevel="70%" paniclevel="400mb" />
       <setting name="E" ignore="true" /> -->
       <!-- If true, the agent will check remote drives -->
       <setting name="remote" value="false" />
       <!-- If true, the agent will check that cd/dvdrom drives are empty
-->
       <setting name="cdrom" value="false" />
</disk>
<externals>
       <setting name="timer" value="3m" />
       <setting name="logstimer" value="60s" />
       <!-- externals launch examples
       <load value="cscript mybbscript.vbs" />
       <load value="myexternal.exe" />
       <load value="cscript wlbs.vbs" timer="15m" />
       <load value="cluster.exe" timer="90s" /> -->
</externals>
<memory>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <setting name="physical" warnlevel="78" paniclevel="98" />
       <setting name="page" warnlevel="70" paniclevel="90" />
       <setting name="virtual" warnlevel="78" paniclevel="90" />
</memory>
<msgs>
       <setting name="alwaysgreen" value="false" />
       <setting name="delay" value="30m" />
       <match logfile="System" type="error" alarmcolor="red" />
       <match logfile="System" type="warning" alarmcolor="yellow" />
       <match logfile="Application" type="error" alarmcolor="red" />
       <match logfile="Application" type="warning" alarmcolor="yellow" />
       <match logfile="Security" type="fail" />
       <ignore logfile="Application" source="BigBrotherHobbitClient"
type="warning" />
       <ignore logfile="System" source="W32Time" type="error" />
       <ignore logfile="System" source="W32Time" type="warning" />
       <ignore logfile="System" source="Perflib" type="warning" />
       <ignore logfile="System" source="TermServDevices" type="warning"
/>
       <ignore logfile="System" source="TermServDevices" type="error" />
       <ignore logfile="System" eventid="7001" source="Service Control
Manager" type="error" />
       <ignore logfile="Security" eventid="529" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="535" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="537" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="539" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="577" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="680" source="Security"
type="Failure" />

       <!-- Some ignore rules examples
       <ignore logfile="Application" eventid="1030" />
       <ignore logfile="System" source="W32Time" />
       -->
</msgs>
<procs>
       <!-- <setting name="CSAdmin.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSAuth.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSDBSync.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSLog.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSMon.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSRAdius.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSTacacs.exe" rule="=1" alarmcolor="yellow" /> -->
       <setting name="CSAdmin.exe" rule="=1" alarmcolor="red" />
       <setting name="CSAuth.exe" rule="=1" alarmcolor="red" />
       <setting name="CSDBSync.exe" rule="=1" alarmcolor="red" />
       <setting name="CSLog.exe" rule="=1" alarmcolor="red" />
       <setting name="CSMon.exe" rule="=1" alarmcolor="red" />
       <setting name="CSRAdius.exe" rule="=1" alarmcolor="red" />
       <setting name="CSTacacs.exe" rule="=1" alarmcolor="red" />

       <!-- some procs rules example
       <setting name="drwtsn" rule="-1" alarmcolor="red" />
       <setting name="pageant.exe" rule="=1" comment="Putty agent deamon"
/> -->
</procs>
<svcs>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <!-- If true, the agent will restart all "automatic  services"
which would be stopped-->
       <setting name="autoreset" value="false" />
       <setting name="alarmcolor" value="red" />
       <setting name="delay" value="3m" />
       <!-- <setting name="CSAdmin" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSAuth" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSDbSync" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSLog" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSMon" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSRadius" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSTacacs" value="started" autoreset="false"
alarmcolor="yellow"/> -->
       <setting name="CSAdmin" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSAuth" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSDbSync" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSLog" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSMon" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSRadius" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSTacacs" value="started" autoreset="false"
alarmcolor="red"/>

       <!-- The line bellow show you svcs rules. If the "Automatic
Updates" service is stopped,  it will be automatically restarted and a red
status will be sent
       until the service get it's correct status
       <setting name="Automatic Updates" value="started" autoreset="true"
alarmcolor="red" />
       -->
</svcs>
<uptime>
       <setting name="delay" value="30m" />
       <setting name="maxdelay" value="3650d" />
</uptime>
</configuration>

Thanks!

Ann


Martin Flemming <user-f286aaa49a76@xymon.invalid>
09/03/2008 08:45 AM
Please respond to
user-ae9b8668bcde@xymon.invalid


To
user-ae9b8668bcde@xymon.invalid
cc

Subject
Re: [hobbit] No Procs Graph?


Hi !

 You needs somthing like this in your hobb-client.cfg

PROC firefox 0 -1 TRACK=firefox

http://hswn.dk/hobbit/help/manpages/man5/hobbit-clients.cfg.5.html

The optional TRACK=id setting causes Hobbit to track the number of
processes found in an RRD file, and put this into a graph which is shown
on the "procs" status display. The id setting is a simple text string
which will be used as the legend for the graph, and also as part of the
RRD filename. It is recommended that you use only letters and digits for
the ID.


Cheers,

       Martin


On Wed, 3 Sep 2008, user-f0b75ba60368@xymon.invalid wrote:

Hi Folks,

I am new to Hobbit and noticed that when you drill down to a device's
procs information, there is no graph but the magnifying glass shows up
as
if a graph should be there.  I've looked through so many man pages, wiki
entries, FAQs, etc. trying to figure this out that my head is spinning!
And when I go to the Hobbit demo site and drill down to

http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=voodoo.hswn.dk&SERVICE=procs

and http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=sarge&SERVICE=procs,
the
procs graphs don't show up there either.  So, have I been wasting my
time
trying to make that graph work or is there some magical trick that a
master is willing to reveal to me?

Any/all help will be appreciated!

Thanks!

Ann

Please respond to
user-ae9b8668bcde@xymon.invalid


To
user-ae9b8668bcde@xymon.invalid
cc

Subject
Re: [hobbit] No Procs Graph?


Hi !

Puh, unfortunately i've got no BBwin-experience ..

sorry ...

have you ask/check on
or
http://sourceforge.net/forum/forum.php?forum_id=460874

cheers,
                 martin


On Wed, 3 Sep 2008, user-f0b75ba60368@xymon.invalid wrote:

Hi Martin and Greg,

Thanks for the reply/suggestion but I do have the TRACK=<id> in the
hobbit-clients.cfg file.  Below is a snippet of the file:

HOST=wdcacs9.ca.kp.org,silacs9.ssdc.kp.org,coracs9.crdc.kp.org,ndcacs1.nndc.kp.org,ndcacs2.nndc.kp.org

       PROC CSAdmin.exe 1 1 red TRACK=csadmin
       PROC CSAuth.exe 1 1 red TRACK=csauth
       PROC CSDBSync.exe 1 1 red TRACK=csdbsync
       PROC CSLog.exe 1 1 red TRACK=cslog
       PROC CSMon.exe 1 1 red TRACK=csmon
       PROC CSRAdius.exe 1 1 red TRACK=csradius
       PROC CSTacacs.exe 1 1 red TRACK=cstacacs

DEFAULT
       # These are the built-in defaults.
       UP      1h
       LOAD    5.0 10.0
       DISK    * 90 95
       MEMPHYS 100 101
       MEMSWAP 50 80
       MEMACT  90 97

The hosts that I am monitoring are Windows 2003 servers.  I am running
BBwin on those servers in local mode.  Below is the BBwin.cfg file from
one of the servers (this cfg file is the same on all of them):

<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<bbwin>
       <setting name="bbdisplay" value="goose.ssdc.kp.org" />
       <!-- <setting name="bbdisplay" value="yoursecondbbdisplay:port"
/>-->
       <!-- BB Pager Part -->
       <!--<setting name="usepager" value="false" />
       <setting name="bbpager" value="yourfirstbbpager" />
       <setting name="bbpager" value="yourfirstbbpager" />
       <setting name="pagerlevels" value="red yellow" /> -->

       <!-- proxy connection settings -->
       <!--
       <setting name="useproxy" value="false" />
       <setting name="proxy" value="[user:password@]host[:port]'/>
       -->

       <!-- bbwin mode local or central -->
       <setting name="mode" value="local" />
       <setting name="configclass" value="win32" />

       <setting name="autoreload" value="true" />
       <setting name="timer" value="5m" />
       <load name="cpu" value="cpu.dll"/>
       <load name="disk" value="disk.dll"/>
       <load name="externals" value="externals.dll"/>
       <load name="filesystem" value="filesystem.dll"/>
       <load name="memory" value="memory.dll"/>
       <load name="msgs" value="msgs.dll"/>
       <load name="procs" value="procs.dll"/>
       <load name="stats" value="stats.dll"/>
       <load name="svcs" value="svcs.dll"/>
       <load name="uptime" value="uptime.dll"/>
       <load name="who" value="who.dll"/>
       <setting name="loglevel" value="3" />
       <setting name="logpath" value="C:\Program
Files\BBWin\logs\BBWin.log"/>
       <!--  If true, the agent will report reporting failures as 
warning
events -->
       <setting name="logreportfailure" value="false" />
</bbwin>
<cpu>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <setting name="default" warnlevel="90" paniclevel="95" delay="3"
/>
</cpu>
<disk>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <!-- Level can be given by % or size unit mb, gb, tb -->
       <setting name="default" warnlevel="85%" paniclevel="95%" />
       <!-- custom rules examples
       <setting name="C" warnlevel="70%" paniclevel="400mb" />
       <setting name="E" ignore="true" /> -->
       <!-- If true, the agent will check remote drives -->
       <setting name="remote" value="false" />
       <!-- If true, the agent will check that cd/dvdrom drives are 
empty
-->
       <setting name="cdrom" value="false" />
</disk>
<externals>
       <setting name="timer" value="3m" />
       <setting name="logstimer" value="60s" />
       <!-- externals launch examples
       <load value="cscript mybbscript.vbs" />
       <load value="myexternal.exe" />
       <load value="cscript wlbs.vbs" timer="15m" />
       <load value="cluster.exe" timer="90s" /> -->
</externals>
<memory>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <setting name="physical" warnlevel="78" paniclevel="98" />
       <setting name="page" warnlevel="70" paniclevel="90" />
       <setting name="virtual" warnlevel="78" paniclevel="90" />
</memory>
<msgs>
       <setting name="alwaysgreen" value="false" />
       <setting name="delay" value="30m" />
       <match logfile="System" type="error" alarmcolor="red" />
       <match logfile="System" type="warning" alarmcolor="yellow" />
       <match logfile="Application" type="error" alarmcolor="red" />
       <match logfile="Application" type="warning" alarmcolor="yellow" 

/>

       <match logfile="Security" type="fail" />
       <ignore logfile="Application" source="BigBrotherHobbitClient"
type="warning" />
       <ignore logfile="System" source="W32Time" type="error" />
       <ignore logfile="System" source="W32Time" type="warning" />
       <ignore logfile="System" source="Perflib" type="warning" />
       <ignore logfile="System" source="TermServDevices" type="warning"
/>
       <ignore logfile="System" source="TermServDevices" type="error" />
       <ignore logfile="System" eventid="7001" source="Service Control
Manager" type="error" />
       <ignore logfile="Security" eventid="529" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="535" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="537" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="539" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="577" source="Security"
type="Failure" />
       <ignore logfile="Security" eventid="680" source="Security"
type="Failure" />

       <!-- Some ignore rules examples
       <ignore logfile="Application" eventid="1030" />
       <ignore logfile="System" source="W32Time" />
       -->
</msgs>
<procs>
       <!-- <setting name="CSAdmin.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSAuth.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSDBSync.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSLog.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSMon.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSRAdius.exe" rule="=1" alarmcolor="yellow" />
       <setting name="CSTacacs.exe" rule="=1" alarmcolor="yellow" /> -->
       <setting name="CSAdmin.exe" rule="=1" alarmcolor="red" />
       <setting name="CSAuth.exe" rule="=1" alarmcolor="red" />
       <setting name="CSDBSync.exe" rule="=1" alarmcolor="red" />
       <setting name="CSLog.exe" rule="=1" alarmcolor="red" />
       <setting name="CSMon.exe" rule="=1" alarmcolor="red" />
       <setting name="CSRAdius.exe" rule="=1" alarmcolor="red" />
       <setting name="CSTacacs.exe" rule="=1" alarmcolor="red" />

       <!-- some procs rules example
       <setting name="drwtsn" rule="-1" alarmcolor="red" />
       <setting name="pageant.exe" rule="=1" comment="Putty agent 
deamon"
/> -->
</procs>
<svcs>
       <!-- If true, the agent  will always report with green status -->
       <setting name="alwaysgreen" value="false" />
       <!-- If true, the agent will restart all "automatic  services"
which would be stopped-->
       <setting name="autoreset" value="false" />
       <setting name="alarmcolor" value="red" />
       <setting name="delay" value="3m" />
       <!-- <setting name="CSAdmin" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSAuth" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSDbSync" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSLog" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSMon" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSRadius" value="started" autoreset="false"
alarmcolor="yellow"/>
       <setting name="CSTacacs" value="started" autoreset="false"
alarmcolor="yellow"/> -->
       <setting name="CSAdmin" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSAuth" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSDbSync" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSLog" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSMon" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSRadius" value="started" autoreset="false"
alarmcolor="red"/>
       <setting name="CSTacacs" value="started" autoreset="false"
alarmcolor="red"/>

       <!-- The line bellow show you svcs rules. If the "Automatic
Updates" service is stopped,  it will be automatically restarted and a 
red
status will be sent
       until the service get it's correct status
       <setting name="Automatic Updates" value="started" 
autoreset="true"
alarmcolor="red" />
       -->
</svcs>
<uptime>
       <setting name="delay" value="30m" />
       <setting name="maxdelay" value="3650d" />
</uptime>
</configuration>

Thanks!

Ann


Martin Flemming <user-f286aaa49a76@xymon.invalid>
09/03/2008 08:45 AM
Please respond to
user-ae9b8668bcde@xymon.invalid


To
user-ae9b8668bcde@xymon.invalid
cc

Subject
Re: [hobbit] No Procs Graph?


Hi !

 You needs somthing like this in your hobb-client.cfg

PROC firefox 0 -1 TRACK=firefox

http://hswn.dk/hobbit/help/manpages/man5/hobbit-clients.cfg.5.html

The optional TRACK=id setting causes Hobbit to track the number of
processes found in an RRD file, and put this into a graph which is shown
on the "procs" status display. The id setting is a simple text string
which will be used as the legend for the graph, and also as part of the
RRD filename. It is recommended that you use only letters and digits for
the ID.


Cheers,

       Martin


On Wed, 3 Sep 2008, user-f0b75ba60368@xymon.invalid wrote:

Hi Folks,

I am new to Hobbit and noticed that when you drill down to a device's
procs information, there is no graph but the magnifying glass shows up
as
if a graph should be there.  I've looked through so many man pages, 
wiki
entries, FAQs, etc. trying to figure this out that my head is spinning!
And when I go to the Hobbit demo site and drill down to

http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=voodoo.hswn.dk&SERVICE=procs

and http://hswn.dk/hobbit-cgi/bb-hostsvc.sh?HOST=sarge&SERVICE=procs,
the
procs graphs don't show up there either.  So, have I been wasting my
time
trying to make that graph work or is there some magical trick that a
master is willing to reveal to me?

Any/all help will be appreciated!

Thanks!

Ann