Solaris 10 SPARC Xymon 4.3.8 build problem
list Ryan Novosielski
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi all, I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty. At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did: MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib ...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what: + test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1 ...sorta looks like the fact that OS= winds up undefined is not a great thing. Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special. Thanks. - -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlAEbykACgkQmb+gadEcsb7xawCg40QI7xPBBS9TT4LTBEekyn2c yvAAn1E2B2zIZrirK9NS0hkv5nGLEJr/ =as74 -----END PGP SIGNATURE-----
list Ryan Novosielski
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Sorry to reply to myself. Looks like this line: uname -s | tr '[/]' '[_]' ...is not acceptable to /usr/bin/tr on Solaris 10. It worked fine on 9. On 10, one receives this error: # uname -s | tr '[/]' '[_]' Bad string
▸
On 07/16/2012 03:44 PM, Ryan Novosielski wrote:Hi all, I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty. At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did: MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib ...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what: + test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1 ...sorta looks like the fact that OS= winds up undefined is not a great thing. Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special. Thanks.
This body part will be downloaded on demand.
▸
- -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAlAEdKAACgkQmb+gadEcsb5dHgCgpJCRP2jtoajkBr7dl+UXWALZ
N5sAmgJFu1aKdyfk9eR0rKMvBpvjQU8j
=3KVh
-----END PGP SIGNATURE-----
list Tim McCloskey
Works on one our x86 boxes, maybe it's broken on Sparc..... [root at thumper2:~]# uname -a SunOS thumper2 5.10 Generic_137138-09 i86pc i386 i86pc [root at thumper2:~]# uname -s | tr '[/]' '[_]' SunOS [root at thumper2:~]#
▸
From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Ryan Novosielski [user-ae4522577e16@xymon.invalid]
Sent: Monday, July 16, 2012 1:08 PM
To: xymon at xymon.com
Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problem
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Sorry to reply to myself. Looks like this line:
uname -s | tr '[/]' '[_]'
...is not acceptable to /usr/bin/tr on Solaris 10. It worked fine on
9. On 10, one receives this error:
# uname -s | tr '[/]' '[_]'
Bad string
On 07/16/2012 03:44 PM, Ryan Novosielski wrote:Hi all, I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty. At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did: MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib ...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what: + test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1 ...sorta looks like the fact that OS= winds up undefined is not a great thing. Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special. Thanks. This body part will be downloaded on demand.
- -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlAEdKAACgkQmb+gadEcsb5dHgCgpJCRP2jtoajkBr7dl+UXWALZ N5sAmgJFu1aKdyfk9eR0rKMvBpvjQU8j =3KVh -----END PGP SIGNATURE-----
list Ryan Novosielski
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 And one more piece of information: /usr/xpg4/bin/tr DOES appear to work OK. What's weird is that this was exactly the same in 4.3.7, so I'm not sure how I got it compiled in that case.
▸
On 07/16/2012 04:08 PM, Ryan Novosielski wrote:Sorry to reply to myself. Looks like this line: uname -s | tr '[/]' '[_]' ...is not acceptable to /usr/bin/tr on Solaris 10. It worked fine on 9. On 10, one receives this error: # uname -s | tr '[/]' '[_]' Bad string On 07/16/2012 03:44 PM, Ryan Novosielski wrote:Hi all,I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty.At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did:MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what:+ test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1...sorta looks like the fact that OS= winds up undefined is not a great thing.Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special.Thanks.This body part will be downloaded on demand.This body part will be downloaded on demand.
- -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAlAEdWYACgkQmb+gadEcsb7IwwCfZxqtw1qN+JXHSyE/VcukeFFR
l+YAoOUSFCiRxuFeI47JuBA8/N9rbKE+
=RiWS
-----END PGP SIGNATURE-----
list Tim McCloskey
[root at thumper2:~]# which tr /usr/bin/tr
▸
From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Tim McCloskey [user-440820cc07d6@xymon.invalid]
Sent: Monday, July 16, 2012 1:10 PM
To: Ryan Novosielski; xymon at xymon.com
Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problem
Works on one our x86 boxes, maybe it's broken on Sparc.....
[root at thumper2:~]# uname -a
SunOS thumper2 5.10 Generic_137138-09 i86pc i386 i86pc
[root at thumper2:~]# uname -s | tr '[/]' '[_]'
SunOS
[root at thumper2:~]#
From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Ryan Novosielski [user-ae4522577e16@xymon.invalid]
Sent: Monday, July 16, 2012 1:08 PM
To: xymon at xymon.com
Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problem
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Sorry to reply to myself. Looks like this line:
uname -s | tr '[/]' '[_]'
...is not acceptable to /usr/bin/tr on Solaris 10. It worked fine on
9. On 10, one receives this error:
# uname -s | tr '[/]' '[_]'
Bad string
On 07/16/2012 03:44 PM, Ryan Novosielski wrote:Hi all, I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty. At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did: MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib ...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what: + test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1 ...sorta looks like the fact that OS= winds up undefined is not a great thing. Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special. Thanks. This body part will be downloaded on demand.
- -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlAEdKAACgkQmb+gadEcsb5dHgCgpJCRP2jtoajkBr7dl+UXWALZ N5sAmgJFu1aKdyfk9eR0rKMvBpvjQU8j =3KVh -----END PGP SIGNATURE-----
list Ryan Novosielski
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Doesn't work on my x86 machine either. Is your /usr/bin/tr dated 01-22-2005?
▸
On 07/16/2012 04:10 PM, Tim McCloskey wrote:Works on one our x86 boxes, maybe it's broken on Sparc..... [root at thumper2:~]# uname -a SunOS thumper2 5.10 Generic_137138-09 i86pc i386 i86pc [root at thumper2:~]# uname -s | tr '[/]' '[_]' SunOS [root at thumper2:~]# ________________________________________ From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Ryan Novosielski [user-ae4522577e16@xymon.invalid] Sent: Monday, July 16, 2012 1:08 PM To: xymon at xymon.com Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problem Sorry to reply to myself. Looks like this line: uname -s | tr '[/]' '[_]' ...is not acceptable to /usr/bin/tr on Solaris 10. It worked fine on 9. On 10, one receives this error: # uname -s | tr '[/]' '[_]' Bad string On 07/16/2012 03:44 PM, Ryan Novosielski wrote:Hi all,I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty.At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did:MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what:+ test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1...sorta looks like the fact that OS= winds up undefined is not a great thing.Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special.Thanks.This body part will be downloaded on demand.
- -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAlAEeFQACgkQmb+gadEcsb6XGgCeI0QyubBNJ1h8LEweKvKacFAl
pmcAoNA+mLox+sp7WU5R54fG7IvcSn0t
=gBty
-----END PGP SIGNATURE-----
list Tim McCloskey
Doh! Had I paid attention to the subject line I may have seen SPARC :) In any case, tr is from 01-22-05 [root at thumper2:~]# ls -l /usr/bin/tr -r-xr-xr-x 1 root bin 15152 Jan 22 2005 /usr/bin/tr
▸
From: Ryan Novosielski [user-ae4522577e16@xymon.invalid]
Sent: Monday, July 16, 2012 1:23 PM
To: Tim McCloskey
Cc: xymon at xymon.com
Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problem
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Doesn't work on my x86 machine either. Is your /usr/bin/tr dated
01-22-2005?
On 07/16/2012 04:10 PM, Tim McCloskey wrote:Works on one our x86 boxes, maybe it's broken on Sparc..... [root at thumper2:~]# uname -a SunOS thumper2 5.10 Generic_137138-09 i86pc i386 i86pc [root at thumper2:~]# uname -s | tr '[/]' '[_]' SunOS [root at thumper2:~]# ________________________________________ From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Ryan Novosielski [user-ae4522577e16@xymon.invalid] Sent: Monday, July 16, 2012 1:08 PM To: xymon at xymon.com Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problem Sorry to reply to myself. Looks like this line: uname -s | tr '[/]' '[_]' ...is not acceptable to /usr/bin/tr on Solaris 10. It worked fine on 9. On 10, one receives this error: # uname -s | tr '[/]' '[_]' Bad string On 07/16/2012 03:44 PM, Ryan Novosielski wrote:Hi all,I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty.At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did:MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what:+ test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1...sorta looks like the fact that OS= winds up undefined is not a great thing.Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special.Thanks.This body part will be downloaded on demand.
- -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/ iEYEARECAAYFAlAEeFQACgkQmb+gadEcsb6XGgCeI0QyubBNJ1h8LEweKvKacFAl pmcAoNA+mLox+sp7WU5R54fG7IvcSn0t =gBty -----END PGP SIGNATURE-----
list Ryan Novosielski
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 No, don't worry, that's immaterial. It works on some of my SPARC boxes and not others, and it does not work on the x86 boxes I've tried. I'm trying to see if I can narrow this down to a patch level somehow. Looks like the package that owns /usr/bin/tr is SUNWcsu. Just to take uname out of the equation, I've been just echo-ing "SunOS" to the tr command, which is what uname -s produces. The results are still a bit all over the map. Apparently, it works if $LANG=C or $LANG is null, and it explodes if $LANG=en_US.UTF-8. Fun times?
▸
On 07/16/2012 04:26 PM, Tim McCloskey wrote:Doh! Had I paid attention to the subject line I may have seen SPARC :) In any case, tr is from 01-22-05 [root at thumper2:~]# ls -l /usr/bin/tr -r-xr-xr-x 1 root bin 15152 Jan 22 2005 /usr/bin/tr ________________________________________ From: Ryan Novosielski [user-ae4522577e16@xymon.invalid] Sent: Monday, July 16, 2012 1:23 PM To: Tim McCloskey Cc: xymon at xymon.com Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problem Doesn't work on my x86 machine either. Is your /usr/bin/tr dated 01-22-2005? On 07/16/2012 04:10 PM, Tim McCloskey wrote:Works on one our x86 boxes, maybe it's broken on Sparc.....[root at thumper2:~]# uname -a SunOS thumper2 5.10 Generic_137138-09 i86pc i386 i86pc [root at thumper2:~]# uname -s | tr '[/]' '[_]' SunOS [root at thumper2:~]#________________________________________ From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Ryan Novosielski [user-ae4522577e16@xymon.invalid] Sent: Monday, July 16, 2012 1:08 PM To: xymon at xymon.com Subject: Re: [Xymon] Solaris 10 SPARC Xymon 4.3.8 build problemSorry to reply to myself. Looks like this line:uname -s | tr '[/]' '[_]'...is not acceptable to /usr/bin/tr on Solaris 10. It worked fine on 9. On 10, one receives this error:# uname -s | tr '[/]' '[_]' Bad stringOn 07/16/2012 03:44 PM, Ryan Novosielski wrote:Hi all,I'm using gcc 3.4.3 and gmake 3.82 on Solaris 10 and I'm having difficulty.At first, I tried just copying the Makefile I used for Xymon 4.3.7 over and changing the 4.3.7 to 4.3.8 (I install in /opt/xymon-4.3.# and symlink /opt/xymon). That failed, so I tried starting from a configure. I get an error that says I don't have PCRE and to specify where it is. So I did:MAKE=/usr/sfw/bin/gmake ./configure.server --pcreinclude /opt/csw/include --pcrelib /opt/csw/lib...but I still get the same error. I added -x to "configure.server" to see what was happening, and it looks like there's something wrong somewhere but I can't figure out what:+ test /opt/csw/include != PCREINC=/opt/csw/include + test /opt/csw/lib != PCRELIB=/opt/csw/lib PCREOK=YES + cd build + test ! -z /opt/csw/include INCOPT=-I/opt/csw/include + test ! -z /opt/csw/lib LIBOPT=-L/opt/csw/lib + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + /usr/sfw/bin/gmake -f Makefile.test-pcre test-compile PCREINC=-I/opt/csw/include + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot compile using PCRE library. ERROR: Cannot compile using PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre test-link PCRELIB=-L/opt/csw/lib + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + test 2 -eq 0 + echo ERROR: Cannot link with PCRE library. ERROR: Cannot link with PCRE library. PCREOK=NO + /usr/sfw/bin/gmake -f Makefile.test-pcre clean + tr [/] [_] + uname -s Bad string OS= Makefile.test-pcre:1: Makefile.: No such file or directory gmake: *** No rule to make target `Makefile.'. Stop. + cd .. + test NO = NO + echo Missing PCRE include- or library-files. These are REQUIRED for xymond Missing PCRE include- or library-files. These are REQUIRED for xymond + echo PCRE can be found at http://www.pcre.org/ PCRE can be found at http://www.pcre.org/ + echo If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" If you have PCRE installed, use the "--pcreinclude DIR" and "--pcrelib DIR" + echo options to configure to specify where they are. options to configure to specify where they are. + exit 1...sorta looks like the fact that OS= winds up undefined is not a great thing.Anyone have any ideas? I did get 4.3.7 compiled, but I no longer remember if I had to do anything special.Thanks.This body part will be downloaded on demand.
- -- - ---- _ _ _ _ ___ _ _ _ |Y#| | | |\/| | \ |\ | | |Ryan Novosielski - Sr. Systems Programmer |$&| |__| | | |__/ | \| _| |user-ae4522577e16@xymon.invalid - 973/972.0922 (2-0922) \__/ Univ. of Med. and Dent.|IST/EI-Academic Svcs. - ADMC 450, Newark -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.11 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org/
iEYEARECAAYFAlAEgeAACgkQmb+gadEcsb4wygCgkKmvYUg52/vuFb7Xbw+1scgs
+l8AoNM94Tcp+XrfAGXoafHuPVjK/XCr
=iBXQ
-----END PGP SIGNATURE-----