xymon client for hp-ux 11.23 ia64
list Anthony D Vaccaro
Any leads here? -----Original Message----- From: Vaccaro, Anthony D Sent: Tuesday, December 21, 2010 4:50 PM To: 'Henrik Størner' Subject: RE: xymon client for hp-ux 11.23 ia64 Thank you Henrik, I will give it a try.... -----Original Message----- From: Henrik Størner [mailto:user-ce4a2c883f75@xymon.invalid] Sent: Tuesday, December 21, 2010 4:48 PM To: Vaccaro, Anthony D Subject: Re: xymon client for hp-ux 11.23 ia64 Hi Anthony, I don't know - HP/UX is not my most used platform, so I don't have any binaries at hand. Try asking on the regular xymon mailing list - xymon at xymon.com - since I know there are some HP/UX users out there. What errors do you get when you try to compile it ? And what compiler are you using ? I seem to recall the original HP/UX compiler has some problems, but gcc should work fine on this platform. Regards, Henrik On Tue, Dec 21, 2010 at 12:03:46PM -0500, Vaccaro, Anthony D wrote:
Henrik, Are there any xymon client binaries available for hp-ux itanium? I tried compiling with no success... Any leads would be helpful. Thank you!!! Anthony D Vaccaro Produban US Mail Code: 11-900-PB3 XXXX Berkshire Boulevard Wyomissing, PA XXXXX Tel: XXX-XXX-XXXX (659025) Fax: XXX-XXX-XXXX user-90da11c83155@xymon.invalid
list Earl Flack
I've compiled Xymon without issue on HP-UX 11.11 on PARISC and 11.31 on PARISC and IA64. We use gcc and make from the HP-UX porting center (http://hpux.connect.org.uk/), the compiler that comes with HP-UX can be problematic. Which compiler and make are you using? What errors are you getting?
▸
-----Original Message-----
From: Vaccaro, Anthony D [mailto:user-90da11c83155@xymon.invalid]
Sent: Tuesday, December 21, 2010 2:43 PM
To: xymon at xymon.com
Subject: [xymon] RE: xymon client for hp-ux 11.23 ia64
Any leads here?
-----Original Message-----
From: Vaccaro, Anthony D
Sent: Tuesday, December 21, 2010 4:50 PM
To: 'Henrik Størner'
Subject: RE: xymon client for hp-ux 11.23 ia64
Thank you Henrik, I will give it a try....
-----Original Message-----
From: Henrik Størner [mailto:user-ce4a2c883f75@xymon.invalid]
Sent: Tuesday, December 21, 2010 4:48 PM
To: Vaccaro, Anthony D
Subject: Re: xymon client for hp-ux 11.23 ia64
Hi Anthony,
I don't know - HP/UX is not my most used platform, so I don't have any binaries at hand. Try asking on the regular xymon mailing list - xymon at xymon.com - since I know there are some HP/UX users out there.
What errors do you get when you try to compile it ? And what compiler are you using ? I seem to recall the original HP/UX compiler has some problems, but gcc should work fine on this platform.
Regards,
Henrik
On Tue, Dec 21, 2010 at 12:03:46PM -0500, Vaccaro, Anthony D wrote:Henrik, Are there any xymon client binaries available for hp-ux itanium? I tried compiling with no success... Any leads would be helpful. Thank you!!! Anthony D Vaccaro Produban US Mail Code: 11-900-PB3 XXXX Berkshire Boulevard Wyomissing, PA XXXXX Tel: XXX-XXX-XXXX (659025) Fax: XXX-XXX-XXXX user-90da11c83155@xymon.invalid
***********************************************************
NOTICE:
This e-mail, including attachments, contains information
that may be confidential, protected by the attorney/client
or other privileges, or exempt from disclosure under
applicable law. Further, this e-mail may contain
information that is proprietary and/or constitutes a trade
secret. This e-mail, including attachments, constitutes
non-public information intended to be conveyed only to the
designated recipient of this communication, please be
advised that any disclosure, dissemination, distribution,
copying, or other use of this communication or any attached
document is strictly prohibited. If you have received this
communication in error, please notify the sender
immediately by reply e-mail and promptly destroy all
electronic and printed copies of this communication and
attached documents.
***********************************************************
list Doug Williams
I have successfully compiled on 11.23 IA64, and the trick is to ensure all prerequisite packages (and each of those packages prerequisites) are in place and correct/functional. Otherwise you get a bunch of false misleading errors that lead off into pointless meanderings trying to solve. Look at the output from "configure" carefully A good while back I also put a compiled version at http://dgw000.embarqspace.com/ But it will compile if you look through all the gnu packages needed.
▸
-----Original Message----- From: Flack, Earl [mailto:user-acadefecad0f@xymon.invalid] Sent: Wednesday, December 22, 2010 1:56 AM To: xymon at xymon.com Subject: RE: [xymon] RE: xymon client for hp-ux 11.23 ia64 I've compiled Xymon without issue on HP-UX 11.11 on PARISC and 11.31 on PARISC and IA64. We use gcc and make from the HP-UX porting center (http://hpux.connect.org.uk/), the compiler that comes with HP-UX can be problematic. Which compiler and make are you using? What errors are you getting? -----Original Message----- From: Vaccaro, Anthony D [mailto:user-90da11c83155@xymon.invalid] Sent: Tuesday, December 21, 2010 2:43 PM To: xymon at xymon.com Subject: [xymon] RE: xymon client for hp-ux 11.23 ia64 Any leads here? -----Original Message----- From: Vaccaro, Anthony D Sent: Tuesday, December 21, 2010 4:50 PM To: 'Henrik Størner' Subject: RE: xymon client for hp-ux 11.23 ia64 Thank you Henrik, I will give it a try.... -----Original Message----- From: Henrik Størner [mailto:user-ce4a2c883f75@xymon.invalid] Sent: Tuesday, December 21, 2010 4:48 PM To: Vaccaro, Anthony D Subject: Re: xymon client for hp-ux 11.23 ia64 Hi Anthony, I don't know - HP/UX is not my most used platform, so I don't have any binaries at hand. Try asking on the regular xymon mailing list - xymon at xymon.com - since I know there are some HP/UX users out there. What errors do you get when you try to compile it ? And what compiler are you using ? I seem to recall the original HP/UX compiler has some problems, but gcc should work fine on this platform. Regards, Henrik On Tue, Dec 21, 2010 at 12:03:46PM -0500, Vaccaro, Anthony D wrote:
Henrik, Are there any xymon client binaries available for hp-ux itanium? I tried compiling with no success... Any leads would be helpful. Thank you!!! Anthony D Vaccaro Produban US Mail Code: 11-900-PB3 XXXX Berkshire Boulevard Wyomissing, PA XXXXX Tel: XXX-XXX-XXXX (659025) Fax: XXX-XXX-XXXX user-90da11c83155@xymon.invalid
*********************************************************** NOTICE: This e-mail, including attachments, contains information that may be confidential, protected by the attorney/client or other privileges, or exempt from disclosure under applicable law. Further, this e-mail may contain information that is proprietary and/or constitutes a trade secret. This e-mail, including attachments, constitutes non-public information intended to be conveyed only to the designated recipient of this communication, please be advised that any disclosure, dissemination, distribution, copying, or other use of this communication or any attached document is strictly prohibited. If you have received this communication in error, please notify the sender immediately by reply e-mail and promptly destroy all electronic and printed copies of this communication and attached documents. ***********************************************************