New to Xymon
list Kevin Attsi King
Hello group, Craig Cook pointed me to this product. After a 8 year absence from admin/monitoring (last was bb1.8c) I am back. I was working on setting up bb and noticed nothing new at dead cat. So here I am missed the hobbit/bbmon generation. I have 200 plus Cisco 7609's I monitor and wanted to see some of the mrtg setups folks might be using. I had bbmrtg setup but never really was happy with it. So before I dive into setting it up I wanted to look at some options and samples. Today I am going to see if I can port over the bb-ospf.pl script. So far I really like the xymon product, it is like my old friend BB yet has the changes I always wanted to get to! Kevin H. King Engineer V Implementations AT&T XXX-XXX-XXXX "You can not please everyone everyday, But everyday please everyone you can" -me
list Galen Johnson
▸
On 03/22/2011 01:36 PM, KING, KEVIN (ATTSI) wrote:
Hello group, Craig Cook pointed me to this product. After a 8 year absence from admin/monitoring (last was bb1.8c) I am back. I was working on setting up bb and noticed nothing new at dead cat. So here I am missed the hobbit/bbmon generation. I have 200 plus Cisco 7609's I monitor and wanted to see some of the mrtg setups folks might be using. I had bbmrtg setup but never really was happy with it. So before I dive into setting it up I wanted to look at some options and samples. Today I am going to see if I can port over the bb-ospf.pl script. So far I really like the xymon product, it is like my old friend BB yet has the changes I always wanted to get to! Kevin H. King Engineer V Implementations AT&T XXX-XXX-XXXX "You can not please everyone everyday, But everyday please everyone you can" -me
Be sure to check out xymonton.trantor.org (hope to rename it to xymonton.org this week). It doesn't have as many monitors as deadcat but since you can easily convert BB scripts to Xymon (even use them natively in some cases), it's not the obstacle it may appear to be. =G=
list Buchan Milne
▸
On Tuesday, 22 March 2011 19:36:44 KING, KEVIN (ATTSI) wrote:
Hello group, Craig Cook pointed me to this product. After a 8 year absence from admin/monitoring (last was bb1.8c) I am back. I was working on setting up bb and noticed nothing new at dead cat. So here I am missed the hobbit/bbmon generation. I have 200 plus Cisco 7609's I monitor and wanted to see some of the mrtg setups folks might be using.
I don't use mrtg, I prefer devmon, as it integrates with Xymon without any effort.
▸
I had bbmrtg setup but never really was happy with it. So before I dive into setting it up I wanted to look at some options and samples. Today I am going to see if I can port over the bb-ospf.pl script.
You could replace this with a devmon template/test. (We don't run OSPF or BGP, so I haven't been able to implement myself).
▸
So far I really like the xymon product, it is like my old friend BB yet has the changes I always wanted to get to!
Regards, Buchan
list Kevin Attsi King
▸
I had bbmrtg setup but never really was happy with it. So before I dive into setting it up I wanted to look at some options and samples. Today I am going to see if I can port over the bb-ospf.pl script.
You could replace this with a devmon template/test. (We don't run OSPF or BGP, so I haven't been able to implement myself).
Regards,
Buchan
I have Devmon running and I am still getting my head wrapped around the
logic. I am working on an OSPF test now. I am a bit rusty and I have
not spent much time in SNMP tool building. So I am having a blast
learning and rubbing off the admin/scripting skills.
When I started this project I pulled out all my old code and custom
tools for BB and looked at them and commented, "I wrote this stuff?,
What the heck does this do?"
Thanks for the comments.
-Kevin
list Buchan Milne
▸
On Monday, 28 March 2011 14:18:17 KING, KEVIN (ATTSI) wrote:
I had bbmrtg setup but never really was happy with it. So before I dive into setting it up I wanted to look at some options and samples. Today I am going to see if I can port over the bb-ospf.pl script.You could replace this with a devmon template/test. (We don't run OSPF or BGP, so I haven't been able to implement myself). Regards, Buchan I have Devmon running and I am still getting my head wrapped around the logic. I am working on an OSPF test now. I am a bit rusty and I have not spent much time in SNMP tool building.
You don't need to build an SNMP tool.
▸
So I am having a blast learning and rubbing off the admin/scripting skills.
You don't need to script either. Please see docs/TEMPLATES in the source distribution of devmon. Regards, Buchan
list Durk Hempenius
Afternoon, I am new to Xymon monitoring and i have a problem. The xymon monitoring we are using worked perfect until yesterday. One of the linux clients which is monitored by xymon doesn't give any report any more about cpu and disk and so on, the conn check is just working fine. This happened after de client yesterday afternoon needed a hard reboot. Is their a way I can reset it so everything goes back to green again?? I really appreciate if someone can help me out with this. Thanks in advance Durk Hempenius Voice Data Bridge B.V. Marathon 11F 1213 PG Hilversum E T F user-8fda9d598152@xymon.invalid +31 88 1850 150 +31 88 1850 199 [cid:image001.png at 01CF58C7.30F061F0]<http://www.voicedatabridge.com/>; De informatie verzonden met dit e-mailbericht (en bijlagen) is uitsluitend bestemd voor de geadresseerde(n)en zij die van de geadresseerde(n) toestemming kregen dit bericht te lezen. Gebruik door anderen dan geadresseerde(n) is verboden. De informatie in dit e-mailbericht (en bijlagen) kan vertrouwelijk van aard zijn en kan binnen het bereik vallen van een geheimhoudingsplicht en een verschoningsrecht. Wanneer u een e-mailbericht ontvangt dat niet voor u is bestemd, informeer de afzender hier direct over en verwijder aub het bericht. Any information transmitted by means of this e-mail (and any of its attachments) is intended exclusively for the addressee or addressees and for those authorized by the addressee or addressees to read this message. Any use by a party other than the addressee or addressees is prohibited. The information contained in this e-mail (or any of its attachments) may be confidential in nature and fall under a duty of non-disclosure and the attorney-client privilege. If you are not the intended recipient, you are requested to inform the sender of this e-mail message of this immediately, and to destroy the original e-mail communication.
list Russell Blumenthal
Silly question, was the Xymon client set to start on reboot?
▸
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Durk Hempenius
Sent: Tuesday, April 15, 2014 10:25 AM
To: xymon at xymon.com
Subject: [Xymon] new to Xymon
Afternoon,
I am new to Xymon monitoring and i have a problem. The xymon monitoring we are using worked perfect until yesterday.
One of the linux clients which is monitored by xymon doesn't give any report any more about cpu and disk and so on, the conn check is just working fine.
This happened after de client yesterday afternoon needed a hard reboot. Is their a way I can reset it so everything goes back to green again??
I really appreciate if someone can help me out with this.
Thanks in advance
Durk Hempenius
Voice Data Bridge B.V.
Marathon 11F
1213 PG Hilversum
E
T
F
user-8fda9d598152@xymon.invalid<mailto:user-8fda9d598152@xymon.invalid> +31 88 1850 150 +31 88 1850 199 [cid:image001.png at 01CF589A.92BE59F0]<http://www.voicedatabridge.com/>;
▸
De informatie verzonden met dit e-mailbericht (en bijlagen) is uitsluitend bestemd voor de geadresseerde(n)en zij die van de geadresseerde(n) toestemming kregen dit bericht te lezen. Gebruik door anderen dan geadresseerde(n) is verboden. De informatie in dit e-mailbericht (en bijlagen) kan vertrouwelijk van aard zijn en kan binnen het bereik vallen van een geheimhoudingsplicht en een verschoningsrecht. Wanneer u een e-mailbericht ontvangt dat niet voor u is bestemd, informeer de afzender hier direct over en verwijder aub het bericht.
Any information transmitted by means of this e-mail (and any of its attachments) is intended exclusively for the addressee or addressees and for those authorized by the addressee or addressees to read this message. Any use by a party other than the addressee or addressees is prohibited. The information contained in this e-mail (or any of its attachments) may be confidential in nature and fall under a duty of non-disclosure and the attorney-client privilege. If you are not the intended recipient, you are requested to inform the sender of this e-mail message of this immediately, and to destroy the original e-mail communication.
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential and privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by e-mail and destroy all copies of the original.
list Torsten Richter
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi Durk, is the XYmon client up and running on that machine? Maybe it was not added to the init.d and rc?.d directories or to the service management with chkconfig (depends on what Linux you are running). Can you please check? How did you install the client, made from source or from rpm? Regards Torsten
▸
On 15.04.2014 16:24, Durk Hempenius wrote:Afternoon, I am new to Xymon monitoring and i have a problem. The xymon monitoring we are using worked perfect until yesterday. One of the linux clients which is monitored by xymon doesn't give any report any more about cpu and disk and so on, the conn check is just working fine. This happened after de client yesterday afternoon needed a hard reboot. Is their a way I can reset it so everything goes back to green again?? I really appreciate if someone can help me out with this. Thanks in advance Durk Hempenius Voice Data Bridge B.V. Marathon 11F 1213 PG Hilversum E T F user-8fda9d598152@xymon.invalid +31 88 1850 150 +31 88 1850 199 [cid:image001.png at 01CF58C7.30F061F0]<http://www.voicedatabridge.com/>; De informatie verzonden met dit e-mailbericht (en bijlagen) is uitsluitend bestemd voor de geadresseerde(n)en zij die van de geadresseerde(n) toestemming kregen dit bericht te lezen. Gebruik door anderen dan geadresseerde(n) is verboden. De informatie in dit e-mailbericht (en bijlagen) kan vertrouwelijk van aard zijn en kan binnen het bereik vallen van een geheimhoudingsplicht en een verschoningsrecht. Wanneer u een e-mailbericht ontvangt dat niet voor u is bestemd, informeer de afzender hier direct over en verwijder aub het bericht. Any information transmitted by means of this e-mail (and any of its attachments) is intended exclusively for the addressee or addressees and for those authorized by the addressee or addressees to read this message. Any use by a party other than the addressee or addressees is prohibited. The information contained in this e-mail (or any of its attachments) may be confidential in nature and fall under a duty of non-disclosure and the attorney-client privilege. If you are not the intended recipient, you are requested to inform the sender of this e-mail message of this immediately, and to destroy the original e-mail communication.
- -- +---------------------------------------------------------+
| E-mail : user-c862b499d9fa@xymon.invalid | | | | Homepage: http://www.richter-it.net/ | +---------------------------------------------------------+ Download my public key from: http://gpg-keyserver.de/pks/lookup?search=0x899093AC&op=get -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (MingW32) iEYEARECAAYFAlNNTLYACgkQ7DlmxomQk6xT7wCfbDFjClTAVtISLhe1Dn7FoTn/ 8IgAn0M/Z6+szzrE+amm7NCPzMRSN04q =CQI7 -----END PGP SIGNATURE-----
list Durk Hempenius
Guys, I have found the problem with the help from you guys, I really appreciate it thnx Durk Hempenius Voice Data Bridge B.V. Marathon 11F 1213 PG Hilversum E: user-8fda9d598152@xymon.invalid T: +31 88 1850 150 F: +31 88 1850 199
▸
-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Torsten Richter
Sent: dinsdag 15 april 2014 17:14
To: xymon at xymon.com
Subject: Re: [Xymon] new to Xymon
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi Durk,
is the XYmon client up and running on that machine?
Maybe it was not added to the init.d and rc?.d directories or to the service management with chkconfig (depends on what Linux you are running).
Can you please check?
How did you install the client, made from source or from rpm?
Regards
Torsten
On 15.04.2014 16:24, Durk Hempenius wrote:Afternoon, I am new to Xymon monitoring and i have a problem. The xymon monitoring we are using worked perfect until yesterday. One of the linux clients which is monitored by xymon doesn't give any report any more about cpu and disk and so on, the conn check is just working fine. This happened after de client yesterday afternoon needed a hard reboot. Is their a way I can reset it so everything goes back to green again?? I really appreciate if someone can help me out with this. Thanks in advance Durk Hempenius Voice Data Bridge B.V. Marathon 11F 1213 PG Hilversum E T F user-8fda9d598152@xymon.invalid +31 88 1850 150 +31 88 1850 199 [cid:image001.png at 01CF58C7.30F061F0]<http://www.voicedatabridge.com/>; De informatie verzonden met dit e-mailbericht (en bijlagen) is uitsluitend bestemd voor de geadresseerde(n)en zij die van de geadresseerde(n) toestemming kregen dit bericht te lezen. Gebruik door anderen dan geadresseerde(n) is verboden. De informatie in dit e-mailbericht (en bijlagen) kan vertrouwelijk van aard zijn en kan binnen het bereik vallen van een geheimhoudingsplicht en een verschoningsrecht. Wanneer u een e-mailbericht ontvangt dat niet voor u is bestemd, informeer de afzender hier direct over en verwijder aub het bericht. Any information transmitted by means of this e-mail (and any of its attachments) is intended exclusively for the addressee or addressees and for those authorized by the addressee or addressees to read this message. Any use by a party other than the addressee or addressees is prohibited. The information contained in this e-mail (or any of its attachments) may be confidential in nature and fall under a duty of non-disclosure and the attorney-client privilege. If you are not the intended recipient, you are requested to inform the sender of this e-mail message of this immediately, and to destroy the original e-mail communication.
- -- +---------------------------------------------------------+ | E-mail : user-c862b499d9fa@xymon.invalid | | | | Homepage: http://www.richter-it.net/ | +---------------------------------------------------------+ Download my public key from: http://gpg-keyserver.de/pks/lookup?search=0x899093AC&op=get -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.10 (MingW32) iEYEARECAAYFAlNNTLYACgkQ7DlmxomQk6xT7wCfbDFjClTAVtISLhe1Dn7FoTn/ 8IgAn0M/Z6+szzrE+amm7NCPzMRSN04q =CQI7 -----END PGP SIGNATURE----- De informatie verzonden met dit e-mailbericht (en bijlagen) is uitsluitend bestemd voor de geadresseerde(n)en zij die van de geadresseerde(n) toestemming kregen dit bericht te lezen. Gebruik door anderen dan geadresseerde(n) is verboden. De informatie in dit e-mailbericht (en bijlagen) kan vertrouwelijk van aard zijn en kan binnen het bereik vallen van een geheimhoudingsplicht en een verschoningsrecht. Wanneer u een e-mailbericht ontvangt dat niet voor u is bestemd, informeer de afzender hier direct over en verwijder aub het bericht. Any information transmitted by means of this e-mail (and any of its attachments) is intended exclusively for the addressee or addressees and for those authorized by the addressee or addressees to read this message. Any use by a party other than the addressee or addressees is prohibited. The information contained in this e-mail (or any of its attachments) may be confidential in nature and fall under a duty of non-disclosure and the attorney-client privilege. If you are not the intended recipient, you are requested to inform the sender of this e-mail message of this immediately, and to destroy the original e-mail communication.
list Steve Lamb
I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Jeremy Laidman
Your Apache works OK otherwise? Do you get any error message on your browser when you go to http://xymon.server.name/xymon/? Perhaps have a look at the Apache error_log file to see if it's complaining about something? What packages did you install?
▸
On 27 August 2015 at 20:38, Steve Lamb <user-8241bcc9ddf4@xymon.invalid> wrote:
I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Jeremy Laidman
(Please keep the List in your replies.) I haven't installed a recent package on a Xymon server. I think you only need the server package, and it includes the client components, so you should be OK, but I just wanted to be sure. The Xymon server package installs an Apache config snippet to be included. I think it will be /etc/httpd/conf.d/xymon-apache.conf or similar. But it won't get activated until Apache is restarted, and I'm not sure if the package restarts Apache for you. On 27 August 2015 at 21:13, Steve Lamb <user-8241bcc9ddf4@xymon.invalid> wrote:
apache is ok, I get a directory listing if i go to http://<host>/xymon Installed packages, I just did a dnf list xymon and installed the only xymon package available. That then downloaded and installed other dependencies. Thats basically all I have done though, are further steps required ?
▸
On 27/08/2015 12:06, Jeremy Laidman wrote: Your Apache works OK otherwise? Do you get any error message on your browser when you go to <http://xymon.server.name/xymon/>; http://xymon.server.name/xymon/? Perhaps have a look at the Apache error_log file to see if it's complaining about something? What packages did you install? On 27 August 2015 at 20:38, Steve Lamb <user-8241bcc9ddf4@xymon.invalid> wrote:I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Jef Jagers
Have you configured a webserver (ex. apache2, httpd)? Met vriendelijke groeten, Jef Jagers Systems Engineer Thomson Reuters Phone: +XX X XXX XXXX http://thomsonreuters.com
▸
-----Original Message-----
From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Steve Lamb
Sent: donderdag, augustus 27, 2015 12:38
To: xymon at xymon.com
Subject: [Xymon] New to Xymon
I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors.
Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Steve Lamb
Hi Yes, its the default one for fedora 22. I can browse to the host and get the welcome page, http://host/xymon brings up an empty directory listing with no files. I've checked for the xymon.conf in the /etc/httpd/conf.d directory and even tried uncommenting this line :- DocumentRoot /var/www/xymon but that has made no difference so I will replace the #
▸
On 27/08/2015 13:20, user-a78daed26301@xymon.invalid wrote:Have you configured a webserver (ex. apache2, httpd)? Met vriendelijke groeten, Jef Jagers Systems Engineer Thomson Reuters Phone: +XX X XXX XXXX http://thomsonreuters.com -----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Steve Lamb Sent: donderdag, augustus 27, 2015 12:38 To: xymon at xymon.com Subject: [Xymon] New to Xymon I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Steve Lamb
Could it be because I hadn't started xymon ? I've found xymon in /usr/bin, but I'm struggling with the correct syntax to start it off
▸
On 27/08/2015 14:30, Steve Lamb wrote:Hi Yes, its the default one for fedora 22. I can browse to the host and get the welcome page, http://host/xymon brings up an empty directory listing with no files. I've checked for the xymon.conf in the /etc/httpd/conf.d directory and even tried uncommenting this line :- DocumentRoot /var/www/xymon but that has made no difference so I will replace the # On 27/08/2015 13:20, user-a78daed26301@xymon.invalid wrote:Have you configured a webserver (ex. apache2, httpd)? Met vriendelijke groeten, Jef Jagers Systems Engineer Thomson Reuters Phone: +XX X XXX XXXX http://thomsonreuters.com -----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Steve Lamb Sent: donderdag, augustus 27, 2015 12:38 To: xymon at xymon.com Subject: [Xymon] New to Xymon I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Japheth Cleaver
On Fedora 22, it'll be systemd controlled, however "/sbin/service xymon start" (or 'restart') should work. If something truly unusual happened, you can reset the systemd unit file with "systemctl preset xymonlaunch.service" Tailing the log files in /var/log/xymon/ (specifically, xymonlaunch.log and xymond.log) might provide useful info as we... HTH, -jc
▸
On Thu, August 27, 2015 8:09 am, Steve Lamb wrote:Could it be because I hadn't started xymon ? I've found xymon in /usr/bin, but I'm struggling with the correct syntax to start it off On 27/08/2015 14:30, Steve Lamb wrote:Hi Yes, its the default one for fedora 22. I can browse to the host and get the welcome page, http://host/xymon brings up an empty directory listing with no files. I've checked for the xymon.conf in the /etc/httpd/conf.d directory and even tried uncommenting this line :- DocumentRoot /var/www/xymon but that has made no difference so I will replace the # On 27/08/2015 13:20, user-a78daed26301@xymon.invalid wrote:Have you configured a webserver (ex. apache2, httpd)? Met vriendelijke groeten, Jef Jagers Systems Engineer Thomson Reuters Phone: +XX X XXX XXXX http://thomsonreuters.com -----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Steve Lamb Sent: donderdag, augustus 27, 2015 12:38 To: xymon at xymon.com Subject: [Xymon] New to Xymon I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Steve Lamb
Thank you so much, I now see my xymon display. I'll read through some documentation now on how to add services I would like to monitor. Could you clarify that I need to run a xymon client on every host I wish to monitor ? if this is correct, where should I get the client from ?
▸
On 27/08/2015 18:27, J.C. Cleaver wrote:On Fedora 22, it'll be systemd controlled, however "/sbin/service xymon start" (or 'restart') should work. If something truly unusual happened, you can reset the systemd unit file with "systemctl preset xymonlaunch.service" Tailing the log files in /var/log/xymon/ (specifically, xymonlaunch.log and xymond.log) might provide useful info as we... HTH, -jc On Thu, August 27, 2015 8:09 am, Steve Lamb wrote:Could it be because I hadn't started xymon ? I've found xymon in /usr/bin, but I'm struggling with the correct syntax to start it off On 27/08/2015 14:30, Steve Lamb wrote:Hi Yes, its the default one for fedora 22. I can browse to the host and get the welcome page, http://host/xymon brings up an empty directory listing with no files. I've checked for the xymon.conf in the /etc/httpd/conf.d directory and even tried uncommenting this line :- DocumentRoot /var/www/xymon but that has made no difference so I will replace the # On 27/08/2015 13:20, user-a78daed26301@xymon.invalid wrote:Have you configured a webserver (ex. apache2, httpd)? Met vriendelijke groeten, Jef Jagers Systems Engineer Thomson Reuters Phone: +XX X XXX XXXX http://thomsonreuters.com -----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Steve Lamb Sent: donderdag, augustus 27, 2015 12:38 To: xymon at xymon.com Subject: [Xymon] New to Xymon I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.
list Jeremy Laidman
You only need a client on hosts where you want to monitor things like disk, memory, CPU and other "internal" states and metrics. External states, such as whether a web server is responding to connections on port 80, can be tested by the Xymon server without any client installed on the host. Terabithia has a "xymon-client" package that you would install on a host (unless it's the Xymon server, in which case you don't install xymon-client because it's already included). J
▸
On 28 August 2015 at 18:51, Steve Lamb <user-8241bcc9ddf4@xymon.invalid> wrote:
Thank you so much, I now see my xymon display. I'll read through some documentation now on how to add services I would like to monitor. Could you clarify that I need to run a xymon client on every host I wish to monitor ? if this is correct, where should I get the client from ? On 27/08/2015 18:27, J.C. Cleaver wrote:On Fedora 22, it'll be systemd controlled, however "/sbin/service xymon start" (or 'restart') should work. If something truly unusual happened, you can reset the systemd unit file with "systemctl preset xymonlaunch.service" Tailing the log files in /var/log/xymon/ (specifically, xymonlaunch.log and xymond.log) might provide useful info as we... HTH, -jc On Thu, August 27, 2015 8:09 am, Steve Lamb wrote:Could it be because I hadn't started xymon ? I've found xymon in /usr/bin, but I'm struggling with the correct syntax to start it off On 27/08/2015 14:30, Steve Lamb wrote:Hi Yes, its the default one for fedora 22. I can browse to the host and get the welcome page, http://host/xymon brings up an empty directory listing with no files. I've checked for the xymon.conf in the /etc/httpd/conf.d directory and even tried uncommenting this line :- DocumentRoot /var/www/xymon but that has made no difference so I will replace the # On 27/08/2015 13:20, user-a78daed26301@xymon.invalid wrote:Have you configured a webserver (ex. apache2, httpd)? Met vriendelijke groeten, Jef Jagers Systems Engineer Thomson Reuters Phone: +XX X XXX XXXX http://thomsonreuters.com -----Original Message----- From: Xymon [mailto:xymon-bounces at xymon.com] On Behalf Of Steve Lamb Sent: donderdag, augustus 27, 2015 12:38 To: xymon at xymon.com Subject: [Xymon] New to Xymon I've installed xymon on fedora 22 using the terabithia.repo. The installation completed without errors. Do I need to take further steps to get it working ? I can't seem to bring up a xymon webpage.