NFS mount points don't appear in disk monitoring 🔗 link

NFS mount points don't appear in disk monitoring

hobbit 4.2.0 running on RHEL 4, one monitored box is Sun sparc box(Solaris 9) 
with hobbit client installed.

local disks look like correct, but NFS mount points don't appear in disk monitoring:

bash-2.05$ df -k
Filesystem            kbytes    used   avail capacity  Mounted on
/dev/dsk/c0t0d0s0    4950381 3163019 1737859    65%    /
/proc                      0       0       0     0%    /proc
mnttab                     0       0       0     0%    /etc/mnttab
fd                         0       0       0     0%    /dev/fd
swap                 1788448     112 1788336     1%    /var/run
swap                 1788360      24 1788336     1%    /tmp
/dev/dsk/c0t3d0s0    8705501 5090262 3528184    60%    /ora
/dev/dsk/c0t2d0s0    8705501 2909068 5709378    34%    /oracle
/dev/dsk/c0t0d0s7    2703017 1989310  659647    76%    /export/home

10.1.1.1:/vol/fv_RmanOraData1
                     12582912  170284 12412628     2%    /oradata1
10.1.1.1:/vol/fv_RmanOraData
                     12582912 6496568 6086344    52%    /oradata
10.1.1.1:/vol/fv_RmanOraLog
                     6291456   36192 6255264     1%    /oralog


only local disks are displayed in disk monitoring:

Tue May 22 20:30:23 CST 2007 - Filesystems OK

Filesystem            kbytes    used   avail capacity  Mounted on
swap                 1789312      24 1789288     1%    /tmp
/dev/dsk/c0t0d0s0    4950381 3163021 1737857    65%    /
/dev/dsk/c0t3d0s0    8705501 5090262 3528184    60%    /ora
/dev/dsk/c0t2d0s0    8705501 2909068 5709378    34%    /oracle
/dev/dsk/c0t0d0s7    2703017 1989312  659645    76%    /export/home

I even added following section before "DEFAULT" section in hobbit-clients.cfg file, but no effect.

HOST=sun01
        DISK /          90 95
        DISK  /oralog   90 95
        DISK   %^/ora.*  90 95


Thanks very much.

On Wednesday 23 May 2007, case wrote:

NFS mount points don't appear in disk monitoring

For me, this is a feature.

You can change this if you open the hobbitclient-linux.sh on the client.  Find 
the df section and change the df command untill it sends all the file system 
information you need.


Stef

On Wed, May 23, 2007 at 04:05:10PM +0800, case wrote:

NFS mount points don't appear in disk monitoring

This is by design - checking NFS filesystems can cause the Hobbit
client to stall indefinitely if the nfs system becomes unresponsive.

I'd recommend checking nfs filesystems from the server they are
exported from. It's also a lot more effective, since you will only
get 1 alarm when it starts to fill up, instead of all 200 hosts 
that have it mounted triggering disk alerts.


Regards,
Henrik