Integrating Xymon into IBM Netcool/OMNIbus
list Carl Melgaard
Hi, Do anyone forward alerts into OMNIbus - and how have you approached this? Regards, Carl Melgaard
list Gautier Begin
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM).
In the hobbit-alaerts.cfg I put these lines:
HOST=*
SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes.
It's writing events in a log file in the format I want. This log file is read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
Carl Melgaard <user-cdea55422fa4@xymon.invalid>
To:
"xymon at xymon.com" <xymon at xymon.com>
Date:
11/29/2011 09:49 AM
Subject:
[Xymon] Integrating Xymon into IBM Netcool/OMNIbus
▸
Hi,
Do anyone forward alerts into OMNIbus - and how have you approached this?
Regards,
Carl Melgaard
list Carl Melgaard
Hi, That would be a solution - but we have 2 xymon-servers, both active, but only 1 used as primary - so I don't see how I could manage 2 logfile-agents on both xymon-servers. Anyone else have another type of solution to this? /melgaard
▸
Fra: Gautier Begin [mailto:user-083785ae1711@xymon.invalid]
Sendt: 29. november 2011 10:23
Til: Carl Melgaard
Cc: xymon at xymon.com; xymon-bounces at xymon.com
Emne: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM).
In the hobbit-alaerts.cfg I put these lines:
HOST=*
SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes.
It's writing events in a log file in the format I want. This log file is read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid | www.csc.com
CSC * This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS * Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France * Registered in France: RCS Nanterre B 315 268 664
From:
Carl Melgaard <user-cdea55422fa4@xymon.invalid>
To:
"xymon at xymon.com" <xymon at xymon.com>
Date:
11/29/2011 09:49 AM
Subject:
[Xymon] Integrating Xymon into IBM Netcool/OMNIbus
list Greg Shea
Hi, We used to use Netcool, and we would send snmptraps from Xymon to Netcool. Currently we do the same, but with our own product. Greg Shea EMC Corporation
▸
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: Tuesday, November 29, 2011 10:37 AM
To: 'xymon at xymon.com'
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
That would be a solution - but we have 2 xymon-servers, both active, but only 1 used as primary - so I don't see how I could manage 2 logfile-agents on both xymon-servers.
Anyone else have another type of solution to this?
/melgaard
Fra: Gautier Begin [mailto:user-083785ae1711@xymon.invalid]
Sendt: 29. november 2011 10:23
Til: Carl Melgaard
Cc: xymon at xymon.com; xymon-bounces at xymon.com
Emne: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM).
In the hobbit-alaerts.cfg I put these lines:
HOST=*
SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes.
It's writing events in a log file in the format I want. This log file is read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid<mailto:user-083785ae1711@xymon.invalid> | www.csc.com
▸
CSC * This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS * Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France * Registered in France: RCS Nanterre B 315 268 664
From:
Carl Melgaard <user-cdea55422fa4@xymon.invalid>
To:
"xymon at xymon.com" <xymon at xymon.com>
Date:
11/29/2011 09:49 AM
Subject:
[Xymon] Integrating Xymon into IBM Netcool/OMNIbus
list Steve Holmes
We are sending snmptraps from Xymon to Spectrum. Steve Purdue
▸
On Tue, Nov 29, 2011 at 10:58 AM, <user-028bf2df2227@xymon.invalid> wrote:
Hi,****
** **
We used to use Netcool, and we would send snmptraps from Xymon to Netcool.
****
Currently we do the same, but with our own product.****
** **
Greg Shea****
EMC Corporation****
** **
** **
*From:* xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On
Behalf Of *Carl Melgaard
*Sent:* Tuesday, November 29, 2011 10:37 AM
*To:* 'xymon at xymon.com'
*Subject:* Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus****
** **
Hi,****
** **
That would be a solution – but we have 2 xymon-servers, both active, but
only 1 used as primary – so I don’t see how I could manage 2 logfile-agents
on both xymon-servers.****
** **
Anyone else have another type of solution to this?****
** **
/melgaard****
** **
*Fra:* Gautier Begin [mailto:user-083785ae1711@xymon.invalid]
*Sendt:* 29. november 2011 10:23
*Til:* Carl Melgaard
*Cc:* xymon at xymon.com; xymon-bounces at xymon.com
*Emne:* Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus****
** **
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation
sever from IBM).
In the hobbit-alaerts.cfg I put these lines:
HOST=*
SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes.
It's writing events in a log file in the format I want. This log file is
read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 |
user-083785ae1711@xymon.invalid | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient,
please delete without copying and kindly advise us by e-mail of the mistake
in delivery. NOTE: Regardless of content, this e-mail shall not operate to
bind CSC to any order or other contract unless pursuant to explicit written
agreement or government initiative expressly permitting the use of e-mail
for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10
Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in
France: RCS Nanterre B 315 268 664 ****
From: ****
Carl Melgaard <user-cdea55422fa4@xymon.invalid> ****
To: ****
"xymon at xymon.com" <xymon at xymon.com> ****
Date: ****
11/29/2011 09:49 AM ****
Subject: ****
[Xymon] Integrating Xymon into IBM Netcool/OMNIbus****
** **
Hi,
Do anyone forward alerts into OMNIbus - and how have you approached this?
Regards,
Carl Melgaard_______________________________________________
--
If they give you ruled paper, write the other way. -Juan Ramon Jimenez,
poet, Nobel Prize in literature (1881-1958)
Truth never damages a cause that is just. -Mohandas Karamchand Gandhi
(1869-1948)
list Gautier Begin
Hello Greg, How did you developp your own product instead of Netcool/OMNIbus (main lines)? We want to do so ot replace ou old TEC...
▸
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
<user-028bf2df2227@xymon.invalid>
To:
<user-cdea55422fa4@xymon.invalid>, <xymon at xymon.com>
Cc:
user-028bf2df2227@xymon.invalid
Date:
11/29/2011 05:39 PM
▸
Subject:
Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
We used to use Netcool, and we would send snmptraps from Xymon to Netcool.
Currently we do the same, but with our own product.
Greg Shea
EMC Corporation
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: Tuesday, November 29, 2011 10:37 AM
To: 'xymon at xymon.com'
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
That would be a solution – but we have 2 xymon-servers, both active, but only 1 used as primary – so I don’t see how I could manage 2 logfile-agents on both xymon-servers.
Anyone else have another type of solution to this?
/melgaard
Fra: Gautier Begin [mailto:user-083785ae1711@xymon.invalid] Sendt: 29. november 2011 10:23
Til: Carl Melgaard
Cc: xymon at xymon.com; xymon-bounces at xymon.com
Emne: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM).
In the hobbit-alaerts.cfg I put these lines: HOST=* SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes. It's writing events in a log file in the format I want. This log file is read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From: Carl Melgaard <user-cdea55422fa4@xymon.invalid> To: "xymon at xymon.com" <xymon at xymon.com> Date: 11/29/2011 09:49 AM Subject: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi, Do anyone forward alerts into OMNIbus - and how have you approached this? Regards, Carl Melgaard
list Paul Root
You will note that he works for EMC. Ionix is the product he’s using. We’re starting to migrate to it and away from Precision/Netcool/Omnibus. Paul Root - Engineer III Managed Services Systems - CenturyLink
▸
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Gautier Begin
Sent: Tuesday, November 29, 2011 11:07 AM
To: user-028bf2df2227@xymon.invalid
Cc: xymon at xymon.com; xymon-bounces at xymon.com; user-028bf2df2227@xymon.invalid
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hello Greg,
How did you developp your own product instead of Netcool/OMNIbus (main lines)?
We want to do so ot replace ou old TEC...
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
<user-028bf2df2227@xymon.invalid>
To:
<user-cdea55422fa4@xymon.invalid>, <xymon at xymon.com>
Cc:
user-028bf2df2227@xymon.invalid
Date:
11/29/2011 05:39 PM
Subject:
Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
We used to use Netcool, and we would send snmptraps from Xymon to Netcool.
Currently we do the same, but with our own product.
Greg Shea
EMC Corporation
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: Tuesday, November 29, 2011 10:37 AM
To: 'xymon at xymon.com'
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
That would be a solution – but we have 2 xymon-servers, both active, but only 1 used as primary – so I don’t see how I could manage 2 logfile-agents on both xymon-servers.
Anyone else have another type of solution to this?
/melgaard
Fra: Gautier Begin [mailto:user-083785ae1711@xymon.invalid]
Sendt: 29. november 2011 10:23
Til: Carl Melgaard
Cc: xymon at xymon.com; xymon-bounces at xymon.com
Emne: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM).
In the hobbit-alaerts.cfg I put these lines:
HOST=*
SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes.
It's writing events in a log file in the format I want. This log file is read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid<mailto:user-083785ae1711@xymon.invalid> | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
Carl Melgaard <user-cdea55422fa4@xymon.invalid>
To:
"xymon at xymon.com" <xymon at xymon.com>
Date:
11/29/2011 09:49 AM
Subject:
[Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
Do anyone forward alerts into OMNIbus - and how have you approached this?
Regards,
Carl Melgaard
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly
prohibited and may be unlawful. If you have received this communication
in error, please immediately notify the sender by reply e-mail and destroy
all copies of the communication and any attachments.
list Greg Shea
Hi Gautier, I was trying not to promote EMC software over other vendors offerings, but we use EMC IONIX Service Assurance Manager as our Manager of Managers. It does correlation and de-duplication like Netcool. I'm not in sales, I'm an IT guy Greg Shea EMC Corporation
▸
From: Gautier Begin [mailto:user-083785ae1711@xymon.invalid]
Sent: Tuesday, November 29, 2011 12:07 PM
To: shea, greg
Cc: user-cdea55422fa4@xymon.invalid; shea, greg; xymon at xymon.com; xymon-bounces at xymon.com
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hello Greg,
How did you developp your own product instead of Netcool/OMNIbus (main lines)?
We want to do so ot replace ou old TEC...
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid<mailto:user-083785ae1711@xymon.invalid> | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
<user-028bf2df2227@xymon.invalid>
To:
<user-cdea55422fa4@xymon.invalid>, <xymon at xymon.com>
Cc:
user-028bf2df2227@xymon.invalid
Date:
11/29/2011 05:39 PM
Subject:
Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
We used to use Netcool, and we would send snmptraps from Xymon to Netcool.
Currently we do the same, but with our own product.
Greg Shea
EMC Corporation
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: Tuesday, November 29, 2011 10:37 AM
To: 'xymon at xymon.com'
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
That would be a solution – but we have 2 xymon-servers, both active, but only 1 used as primary – so I don’t see how I could manage 2 logfile-agents on both xymon-servers.
Anyone else have another type of solution to this?
/melgaard
Fra: Gautier Begin [mailto:user-083785ae1711@xymon.invalid]
Sendt: 29. november 2011 10:23
Til: Carl Melgaard
Cc: xymon at xymon.com<mailto:xymon at xymon.com>; xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>
Emne: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM).
In the hobbit-alaerts.cfg I put these lines:
HOST=*
SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes.
It's writing events in a log file in the format I want. This log file is read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid<mailto:user-083785ae1711@xymon.invalid> | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
Carl Melgaard <user-cdea55422fa4@xymon.invalid>
To:
"xymon at xymon.com" <xymon at xymon.com>
Date:
11/29/2011 09:49 AM
Subject:
[Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
Do anyone forward alerts into OMNIbus - and how have you approached this?
Regards,
Carl Melgaard
list Greg Shea
True, but I'm an end user :)
▸
From: Root, Paul [mailto:user-76fdb6883669@xymon.invalid]
Sent: Tuesday, November 29, 2011 12:14 PM
To: 'Gautier Begin'; shea, greg
Cc: xymon at xymon.com; xymon-bounces at xymon.com; shea, greg
Subject: RE: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
You will note that he works for EMC. Ionix is the product he’s using.
We’re starting to migrate to it and away from Precision/Netcool/Omnibus.
Paul Root - Engineer III
Managed Services Systems - CenturyLink
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Gautier Begin
Sent: Tuesday, November 29, 2011 11:07 AM
To: user-028bf2df2227@xymon.invalid
Cc: xymon at xymon.com; xymon-bounces at xymon.com; user-028bf2df2227@xymon.invalid
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hello Greg,
How did you developp your own product instead of Netcool/OMNIbus (main lines)?
We want to do so ot replace ou old TEC...
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid<mailto:user-083785ae1711@xymon.invalid> | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
<user-028bf2df2227@xymon.invalid>
To:
<user-cdea55422fa4@xymon.invalid>, <xymon at xymon.com>
Cc:
user-028bf2df2227@xymon.invalid
Date:
11/29/2011 05:39 PM
Subject:
Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
We used to use Netcool, and we would send snmptraps from Xymon to Netcool.
Currently we do the same, but with our own product.
Greg Shea
EMC Corporation
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Carl Melgaard
Sent: Tuesday, November 29, 2011 10:37 AM
To: 'xymon at xymon.com'
Subject: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
That would be a solution – but we have 2 xymon-servers, both active, but only 1 used as primary – so I don’t see how I could manage 2 logfile-agents on both xymon-servers.
Anyone else have another type of solution to this?
/melgaard
Fra: Gautier Begin [mailto:user-083785ae1711@xymon.invalid]
Sendt: 29. november 2011 10:23
Til: Carl Melgaard
Cc: xymon at xymon.com<mailto:xymon at xymon.com>; xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>
Emne: Re: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Carl,
I'm currently sending events from XYMON to TEC (the previous correlation sever from IBM).
In the hobbit-alaerts.cfg I put these lines:
HOST=*
SCRIPT /project/hobbit0/bin/tec_link.pl any REPEAT=30 FORMAT=SMS
This is script is triggered by each new alarm and old ones every 30minutes.
It's writing events in a log file in the format I want. This log file is read by a TEC agent.
Cordialement, Regards,Mit freundlichen Grüßen,
Gautier BEGIN
Admin and Tools Team
CSC Computer Sciences Luxembourg S.A.
12D Impasse Drosbach
L-1882 Luxembourg
Global Outsourcing Service | p:+352 24 834 276 | m:+352 621 229 172 | user-083785ae1711@xymon.invalid<mailto:user-083785ae1711@xymon.invalid> | www.csc.com
CSC • This is a PRIVATE message. If you are not the intended recipient, please delete without copying and kindly advise us by e-mail of the mistake in delivery. NOTE: Regardless of content, this e-mail shall not operate to bind CSC to any order or other contract unless pursuant to explicit written agreement or government initiative expressly permitting the use of e-mail for such purpose
• CSC Computer Sciences SAS • Registered Office: Immeuble Le Balzac, 10 Place des Vosges, 92072 Paris La Défense Cedex, France • Registered in France: RCS Nanterre B 315 268 664
From:
Carl Melgaard <user-cdea55422fa4@xymon.invalid>
To:
"xymon at xymon.com" <xymon at xymon.com>
Date:
11/29/2011 09:49 AM
Subject:
[Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
Do anyone forward alerts into OMNIbus - and how have you approached this?
Regards,
Carl Melgaard
This communication is the property of CenturyLink and may contain confidential or privileged information. Unauthorized use of this communication is strictly
prohibited and may be unlawful. If you have received this communication
in error, please immediately notify the sender by reply e-mail and destroy
all copies of the communication and any attachments.
list Tim McCloskey
Hi Carl, I can try to answer 1/2 of the query. I had/have no access to NetCool and don't know what OMNIbus is so I hope this helps. In order to send alerts to NetCool in a distant data center I set up rsyslog, on multiple hobbit servers. We were limited to using snmp or syslog and rsyslog allowed me to peak at text files generated by hobbit. The setup was pretty simple, I only monitor the notifications.log file though. It's been a while so I don't remember all of the details but I'll look at the config files today to see if I notice anything significant or tricky. Tim
▸
From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Carl Melgaard [user-cdea55422fa4@xymon.invalid]
Sent: Tuesday, November 29, 2011 12:21 AM
To: xymon at xymon.com
Subject: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
Do anyone forward alerts into OMNIbus - and how have you approached this?
Regards,
Carl Melgaard
list Tim McCloskey
Hi Carl, Attached text file with two simple config file details. IP addresses changed. It's quite possible that a portion of these config details came from this list, I really don't recall. Warning: There are no regular directives (/var/log/messages, and so on) in these config files but they can be configured. In a nutshell, we just send data from a few hobbit servers to a 'main' hobbit server. This server then sends the data to netcool in some remote place, and to another local system for testing (used port 1985 for that bit). The output looks ugly to me, but it's what the remote wanted/accepted. The tag name hobbit: can be changed to whatever fits your needs. rsyslogd is standard in some linuxes, not sure about building this on Sloaris but it should be possible. Be real careful with this, you need to consider your existing syslog needs. Regards,
▸
Tim
From: xymon-bounces at xymon.com [xymon-bounces at xymon.com] On Behalf Of Carl Melgaard [user-cdea55422fa4@xymon.invalid]
Sent: Tuesday, November 29, 2011 12:21 AM
To: xymon at xymon.com
Subject: [Xymon] Integrating Xymon into IBM Netcool/OMNIbus
Hi,
Do anyone forward alerts into OMNIbus - and how have you approached this?
Regards,
Carl Melgaard
Attachments (1)