mounted disk character limitation? 🔗 link

From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nordquist, Daniel
Sent: Friday, April 27, 2012 2:38 PM
To: xymon at xymon.com
Subject: [Xymon] mounted disk character limitation?

Hey all,

I have several windows servers that have disk mounts that have no drive letter.  The disks show up in Xymon with the volume name displayed, but anything past 7 characters gets truncated and the hobbit page displays duplicate names due the first 7 characters being common across the volumes.

Because of this only one of each of the duplicate (named) disks gets a graph and determining which disk is which is a royal pain.

Is there a limitation in Xymon?  Where is the volume name getting truncated?  Is there a setting I can change to allow longer names?

Thank you!

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://www.orlandohealth.com/>;
facebook.com/orlandohealth<http://www.facebook.com/orlandohealth>;
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

On 27-04-2012 20:37, Nordquist, Daniel wrote:

I have several windows servers that have disk mounts that have no drive
letter. The disks show up in Xymon with the volume name displayed, but
anything past 7 characters gets truncated and the hobbit page displays
duplicate names due the first 7 characters being common across the volumes.

Because of this only one of each of the duplicate (named) disks gets a
graph and determining which disk is which is a royal pain.

Is there a limitation in Xymon? Where is the volume name getting
truncated? Is there a setting I can change to allow longer names?

----- Original Message -----
From: Henrik Størner
Sent: 04/28/12 07:16 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

On 27-04-2012 20:37, Nordquist, Daniel wrote:

I have several windows servers that have disk mounts that have no drive
letter. The disks show up in Xymon with the volume name displayed, but
anything past 7 characters gets truncated and the hobbit page displays
duplicate names due the first 7 characters being common across the volumes.

Because of this only one of each of the duplicate (named) disks gets a
graph and determining which disk is which is a royal pain.

Is there a limitation in Xymon? Where is the volume name getting
truncated? Is there a setting I can change to allow longer names?

The Xymon server doesn't have any limitation (Unix filesystems report 
the mount point, which is often much longer than 7-8 characters). I 
would suspect that this happens on the client side - so what client are 
you using ?

Perhaps the BBWin people can shed some light on this.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Malcolm Hunter
Sent: Saturday, April 28, 2012 8:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Henrik Størner
Sent: 04/28/12 07:16 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

On 27-04-2012 20:37, Nordquist, Daniel wrote:

I have several windows servers that have disk mounts that have no > drive letter. The disks show up in Xymon with the volume name > displayed, but anything past 7 characters gets truncated and the > hobbit page displays duplicate names due the first 7 characters being common across the volumes.

Because of this only one of each of the duplicate (named) disks gets > a graph and determining which disk is which is a royal pain.

Is there a limitation in Xymon? Where is the volume name getting > truncated? Is there a setting I can change to allow longer names?

The Xymon server doesn't have any limitation (Unix filesystems report the mount point, which is often much longer than 7-8 characters). I would suspect that this happens on the client side - so what client are you using ?

Perhaps the BBWin people can shed some light on this.

What version of BBWin? This has been addressed in version 0.13.

Regards,
Malcolm
--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net

youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Malcolm Hunter
Sent: Saturday, April 28, 2012 8:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Henrik Størner
Sent: 04/28/12 07:16 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

On 27-04-2012 20:37, Nordquist, Daniel wrote:

I have several windows servers that have disk mounts that have no drive
letter. The disks show up in Xymon with the volume name displayed, but
anything past 7 characters gets truncated and the hobbit page displays
duplicate names due the first 7 characters being common across the volumes.

Because of this only one of each of the duplicate (named) disks gets a
graph and determining which disk is which is a royal pain.

Is there a limitation in Xymon? Where is the volume name getting
truncated? Is there a setting I can change to allow longer names?

The Xymon server doesn't have any limitation (Unix filesystems report
the mount point, which is often much longer than 7-8 characters). I
would suspect that this happens on the client side - so what client are
you using ?

Perhaps the BBWin people can shed some light on this.

What version of BBWin? This has been addressed in version 0.13.

Regards,
Malcolm
--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message.  To reply to our email administrator directly, send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message.  To reply to our email administrator directly, send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel

To: Malcolm Hunter; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


**************************************************************************** 

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


****************************************************************************
The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any).

*****************************************************************************


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message.  To reply to our email administrator directly, send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

-----Original Message-----
From: Nordquist, Daniel [mailto:user-b7c65cb59f49@xymon.invalid] 
Sent: 01 May 2012 19:24
To: Morris, Chris (SS-IS); user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


************************************************************************
****
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient,
you are hereby notified that you have received this document in error
and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any).

************************************************************************
*****


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.

**************************************************************************** 
The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any). 

*****************************************************************************

 
-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel

Cc: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


************************************************************************
****
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient,
you are hereby notified that you have received this document in error
and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any).

************************************************************************
*****


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: White, Bruce [mailto:user-58f975e8bf9d@xymon.invalid]
Sent: Wednesday, May 02, 2012 10:05 AM
To: Nordquist, Daniel; user-e510f6c03e57@xymon.invalid; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

What is being created in /<install dir>/data/rrd/<host>/  ?   Do you
even see an attempt to create the rrd files?


Bruce White
Senior Enterprise Systems Engineer | Phone: X-XXX-XXX-XXXX | Fax: XXX-XXX-XXXX | user-58f975e8bf9d@xymon.invalid | http://www.fellowes.com/


Disclaimer: The information contained in this message may be privileged and confidential and protected from disclosure. If the reader of this message is not the intended recipient or an employee or agent responsible for delivering this message to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by replying to the message and deleting it from your computer. Thank you. Fellowes, Inc.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel
Sent: Tuesday, May 01, 2012 1:24 PM
To: user-e510f6c03e57@xymon.invalid; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


************************************************************************
****
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient,
you are hereby notified that you have received this document in error
and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any).

************************************************************************
*****


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message.  To reply to our email administrator directly, send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Wednesday, May 02, 2012 4:19 AM
To: Nordquist, Daniel
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Dan,

I assume you have checked that separate rrd files are being created for
all these disks/filesystems.

I found that when rrd filenames were of the format abc_def_ghk.rrd I
needed to change the graphs.cfg FNPATTERN line to abc_def_(.+).rrd from
abc_def_(.*).rrd to get it to create the graphs.

-----Original Message-----
From: Nordquist, Daniel [mailto:user-b7c65cb59f49@xymon.invalid]
Sent: 01 May 2012 19:24
To: Morris, Chris (SS-IS); user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


************************************************************************
****
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient,
you are hereby notified that you have received this document in error
and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any).

************************************************************************
*****


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.

****************************************************************************
The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any).

*****************************************************************************


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message.  To reply to our email administrator directly, send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

<user-b7c65cb59f49@xymon.invalid>wrote:

Changing the * to a + made no difference whatsoever.


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Wednesday, May 02, 2012 4:19 AM
To: Nordquist, Daniel
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Dan,

I assume you have checked that separate rrd files are being created for
all these disks/filesystems.

I found that when rrd filenames were of the format abc_def_ghk.rrd I
needed to change the graphs.cfg FNPATTERN line to abc_def_(.+).rrd from
abc_def_(.*).rrd to get it to create the graphs.

-----Original Message-----
From: Nordquist, Daniel [mailto:user-b7c65cb59f49@xymon.invalid]
Sent: 01 May 2012 19:24
To: Morris, Chris (SS-IS); user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid [mailto:user-e510f6c03e57@xymon.invalid]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid
Cc: xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com
facebook.com/orlandohealth
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of Malcolm Hunter
Sent: Sunday, April 29, 2012 4:33 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


************************************************************************
****
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient,
you are hereby notified that you have received this document in error
and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any).

************************************************************************
*****


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


****************************************************************************
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been addressed.
If the reader of this message is not an intended recipient, you are hereby
notified that you have received this document in error and that any review,
dissemination or copying of the message or associated attachments is
strictly prohibited. If you have received this email in error, please
contact the sender by return email or call 01793 877777 and ask for the
sender and then delete it immediately from your system.Please note that
neither the RWE Group of Companies nor the sender accepts any
responsibility for viruses and it is your responsibility to scan
attachments (if any).


*****************************************************************************


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are not
the intended recipient, any review, use, or distribution of this e-mail
message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you have
received this confidential communication in error, please notify the sender
immediately by reply e-mail message and permanently delete the original
message.  To reply to our email administrator directly, send an email to:
user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on behalf
of Orlando Health by e-mail without express written confirmation by an
officer of the corporation. Any views or opinions presented in this e-mail
are solely those of the author and do not necessarily represent those of
Orlando Health.

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://www.orlandohealth.com/>;
facebook.com/orlandohealth<http://www.facebook.com/orlandohealth>;
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Steven Carr
Sent: Wednesday, May 02, 2012 4:32 PM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

If the RRD files are not there in the first place then no, editing the graph config wont make any difference.

You need to find out why the RRD files aren't being created. I recreated this on our system and got the same result, RRDs not created for folder mounted drives, so it's nothing with your setup.

Looking at the Xymon source code for bbwin.c (http://xymon.svn.sourceforge.net/viewvc/xymon/branches/4.3.7/xymond/client/bbwin.c?revision=6804&view=markup) it calls the unix_disk_report function for the disk checks which is in xymond_client.c (http://xymon.svn.sourceforge.net/viewvc/xymon/branches/4.3.7/xymond/xymond_client.c?revision=6804&view=markup) - unfortunately that's why my tracking ends, I'm not a C programmer and not sure where to start debugging the code.

My guess is the folder mounted drives are unsupported by the main Xymon core.

Steve

On 2 May 2012 20:07, Nordquist, Daniel <user-b7c65cb59f49@xymon.invalid<mailto:user-b7c65cb59f49@xymon.invalid>> wrote:
Changing the * to a + made no difference whatsoever.


Dan Nordquist
IS Systems Support

Orlando Health

-----Original Message-----
From: user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid> [mailto:user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid>]
Sent: Wednesday, May 02, 2012 4:19 AM
To: Nordquist, Daniel
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

Dan,

I assume you have checked that separate rrd files are being created for
all these disks/filesystems.

I found that when rrd filenames were of the format abc_def_ghk.rrd I
needed to change the graphs.cfg FNPATTERN line to abc_def_(.+).rrd from
abc_def_(.*).rrd to get it to create the graphs.

-----Original Message-----
From: Nordquist, Daniel [mailto:user-b7c65cb59f49@xymon.invalid<mailto:user-b7c65cb59f49@xymon.invalid>]
Sent: 01 May 2012 19:24
To: Morris, Chris (SS-IS); user-8c18ec239c05@xymon.invalid<mailto:user-8c18ec239c05@xymon.invalid>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health

-----Original Message-----
From: user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid> [mailto:user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid>]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid<mailto:user-8c18ec239c05@xymon.invalid>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----

Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health

Subject: Re: [Xymon] mounted disk character limitation?

----- Original Message -----
From: Nordquist, Daniel
Sent: 04/28/12 10:48 PM
To: Malcolm Hunter, xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

Where can I download 0.13?

http://sourceforge.net/projects/bbwin/

--
BBWin Development - The Windows client for Big Brother and Xymon

http://bbwin.sourceforge.net
http://xymon.sourceforge.net


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid<mailto:user-40803320aaf5@xymon.invalid> .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.


************************************************************************
****
The information contained in this email is intended only for the use of
the intended recipient at the email address to which it has been
addressed. If the reader of this message is not an intended recipient,
you are hereby notified that you have received this document in error
and that any review, dissemination or copying of the message or
associated attachments is strictly prohibited. If you have received this
email in error, please contact the sender by return email or call 01793
877777 and ask for the sender and then delete it immediately from your
system.Please note that neither the RWE Group of Companies nor the
sender accepts any responsibility for viruses and it is your
responsibility to scan attachments (if any).

************************************************************************
*****


This e-mail message and any attached files are confidential and are
intended solely for the use of the addressee(s) named above. If you are
not the intended recipient, any review, use, or distribution of this
e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy
regulations, attorney-client work product, or other privileges. If you
have received this confidential communication in error, please notify
the sender immediately by reply e-mail message and permanently delete
the original message.  To reply to our email administrator directly,
send an email to:  user-40803320aaf5@xymon.invalid<mailto:user-40803320aaf5@xymon.invalid> .

If this e-mail message concerns a contract matter, be advised that no
employee or agent is authorized to conclude any binding agreement on
behalf of Orlando Health by e-mail without express written confirmation
by an officer of the corporation. Any views or opinions presented in
this e-mail are solely those of the author and do not necessarily
represent those of Orlando Health.

****************************************************************************
The information contained in this email is intended only for the use of the intended recipient at the email address to which it has been addressed. If the reader of this message is not an intended recipient, you are hereby notified that you have received this document in error and that any review, dissemination or copying of the message or associated attachments is strictly prohibited. If you have received this email in error, please contact the sender by return email or call 01793 877777 and ask for the sender and then delete it immediately from your system.Please note that neither the RWE Group of Companies nor the sender accepts any responsibility for viruses and it is your responsibility to scan attachments (if any).

*****************************************************************************


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message.  To reply to our email administrator directly, send an email to:  user-40803320aaf5@xymon.invalid<mailto:user-40803320aaf5@xymon.invalid> .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

Thanks!

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://www.orlandohealth.com/>;
facebook.com/orlandohealth<http://www.facebook.com/orlandohealth>;
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nordquist, Daniel
Sent: Wednesday, May 02, 2012 7:52 PM
To: Steven Carr; xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Thanks!

Henrik?  Do you still believe it’s a client issue, or maybe something with the server?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://www.orlandohealth.com/>;
facebook.com/orlandohealth<http://www.facebook.com/orlandohealth>;
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Steven Carr
Sent: Wednesday, May 02, 2012 4:32 PM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

If the RRD files are not there in the first place then no, editing the graph config wont make any difference.

You need to find out why the RRD files aren't being created. I recreated this on our system and got the same result, RRDs not created for folder mounted drives, so it's nothing with your setup.

Looking at the Xymon source code for bbwin.c (http://xymon.svn.sourceforge.net/viewvc/xymon/branches/4.3.7/xymond/client/bbwin.c?revision=6804&view=markup) it calls the unix_disk_report function for the disk checks which is in xymond_client.c (http://xymon.svn.sourceforge.net/viewvc/xymon/branches/4.3.7/xymond/xymond_client.c?revision=6804&view=markup) - unfortunately that's why my tracking ends, I'm not a C programmer and not sure where to start debugging the code.

My guess is the folder mounted drives are unsupported by the main Xymon core.

Steve
On 2 May 2012 20:07, Nordquist, Daniel <user-b7c65cb59f49@xymon.invalid<mailto:user-b7c65cb59f49@xymon.invalid>> wrote:
Changing the * to a + made no difference whatsoever.


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://orlandohealth.com>;
facebook.com/orlandohealth<http://facebook.com/orlandohealth>;
youtube.com/orlandohealth<http://youtube.com/orlandohealth>;
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX<tel:XXX.XXX.XXXX>


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid> [mailto:user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid>]
Sent: Wednesday, May 02, 2012 4:19 AM
To: Nordquist, Daniel
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

Dan,

I assume you have checked that separate rrd files are being created for
all these disks/filesystems.

I found that when rrd filenames were of the format abc_def_ghk.rrd I
needed to change the graphs.cfg FNPATTERN line to abc_def_(.+).rrd from
abc_def_(.*).rrd to get it to create the graphs.

-----Original Message-----
From: Nordquist, Daniel [mailto:user-b7c65cb59f49@xymon.invalid<mailto:user-b7c65cb59f49@xymon.invalid>]
Sent: 01 May 2012 19:24
To: Morris, Chris (SS-IS); user-8c18ec239c05@xymon.invalid<mailto:user-8c18ec239c05@xymon.invalid>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://orlandohealth.com>;
facebook.com/orlandohealth<http://facebook.com/orlandohealth>;
youtube.com/orlandohealth<http://youtube.com/orlandohealth>;
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX<tel:XXX.XXX.XXXX>


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid> [mailto:user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid>]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid<mailto:user-8c18ec239c05@xymon.invalid>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: user-40803320aaf5@xymon.invalid .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.

Jamison Maxwell
user-87d336c3dce6@xymon.invalid<mailto:user-87d336c3dce6@xymon.invalid>

From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf Of Nordquist, Daniel
Sent: Tuesday, May 08, 2012 8:39 AM
To: xymon at xymon.com
Subject: Re: [Xymon] mounted disk character limitation?

Since the client version upgrade did fix the web display, how do we fix the graph problem?

Any ideas?

Original issue is: Mounted disks in Windows without a drive letter were not displaying on hobbit due to name truncation creating duplicate names (only the first 7 letters of the disk name), so multiple disks were showing up with the same name and only one graph was being generated.  Upgrading to bbwin ver 0.13 resolved the issue of name display on the web page, but no graphs will generate.

Thanks!

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://www.orlandohealth.com/>;
facebook.com/orlandohealth<http://www.facebook.com/orlandohealth>;
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com]<mailto:[mailto:xymon-bounces at xymon.com]> On Behalf Of Nordquist, Daniel
Sent: Wednesday, May 02, 2012 7:52 PM
To: Steven Carr; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] mounted disk character limitation?

Thanks!

Henrik?  Do you still believe it’s a client issue, or maybe something with the server?

Thanks,

Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://www.orlandohealth.com/>;
facebook.com/orlandohealth<http://www.facebook.com/orlandohealth>;
youtube.com/orlandohealth
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX


From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com]<mailto:[mailto:xymon-bounces at xymon.com]> On Behalf Of Steven Carr
Sent: Wednesday, May 02, 2012 4:32 PM
To: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] mounted disk character limitation?

If the RRD files are not there in the first place then no, editing the graph config wont make any difference.

You need to find out why the RRD files aren't being created. I recreated this on our system and got the same result, RRDs not created for folder mounted drives, so it's nothing with your setup.

Looking at the Xymon source code for bbwin.c (http://xymon.svn.sourceforge.net/viewvc/xymon/branches/4.3.7/xymond/client/bbwin.c?revision=6804&view=markup) it calls the unix_disk_report function for the disk checks which is in xymond_client.c (http://xymon.svn.sourceforge.net/viewvc/xymon/branches/4.3.7/xymond/xymond_client.c?revision=6804&view=markup) - unfortunately that's why my tracking ends, I'm not a C programmer and not sure where to start debugging the code.

My guess is the folder mounted drives are unsupported by the main Xymon core.

Steve
On 2 May 2012 20:07, Nordquist, Daniel <user-b7c65cb59f49@xymon.invalid<mailto:user-b7c65cb59f49@xymon.invalid>> wrote:
Changing the * to a + made no difference whatsoever.


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://orlandohealth.com>;
facebook.com/orlandohealth<http://facebook.com/orlandohealth>;
youtube.com/orlandohealth<http://youtube.com/orlandohealth>;
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX<tel:XXX.XXX.XXXX>


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid> [mailto:user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid>]
Sent: Wednesday, May 02, 2012 4:19 AM
To: Nordquist, Daniel
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

Dan,

I assume you have checked that separate rrd files are being created for
all these disks/filesystems.

I found that when rrd filenames were of the format abc_def_ghk.rrd I
needed to change the graphs.cfg FNPATTERN line to abc_def_(.+).rrd from
abc_def_(.*).rrd to get it to create the graphs.

-----Original Message-----
From: Nordquist, Daniel [mailto:user-b7c65cb59f49@xymon.invalid<mailto:user-b7c65cb59f49@xymon.invalid>]
Sent: 01 May 2012 19:24
To: Morris, Chris (SS-IS); user-8c18ec239c05@xymon.invalid<mailto:user-8c18ec239c05@xymon.invalid>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

Names are like:

TempDB_Data23
TempDB_Data24
Etc...
Etc...

My hobbitgraph.cfg already has a couple disk defaults in it.

What would I have to do?  I have no idea what you're referring to?

Thanks,


Dan Nordquist
IS Systems Support

Orlando Health
orlandohealth.com<http://orlandohealth.com>;
facebook.com/orlandohealth<http://facebook.com/orlandohealth>;
youtube.com/orlandohealth<http://youtube.com/orlandohealth>;
@orlandohealth on twitter

XXXX Kuhl Ave., MP 56
Orlando, FL  XXXXX
tel: XXX.XXX.XXXX<tel:XXX.XXX.XXXX>


-----Original Message-----
From: user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid> [mailto:user-e510f6c03e57@xymon.invalid<mailto:user-e510f6c03e57@xymon.invalid>]
Sent: Tuesday, May 01, 2012 9:41 AM
To: Nordquist, Daniel; user-8c18ec239c05@xymon.invalid<mailto:user-8c18ec239c05@xymon.invalid>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: RE: [Xymon] mounted disk character limitation?

What are the drive names like? Have you looked in graphs.cfg on the
xymon server to see whether you can create a new stanza to match your
rrds.

-----Original Message-----
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf
Of Nordquist, Daniel
Sent: 01 May 2012 14:23
To: Malcolm Hunter; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] mounted disk character limitation?

Thank you for this, but this does not resolve my issue.

I can now see the full drive names displayed on the hobbit page, but my
graphs do not build.  The issue before was that I had truncated names
and only one graph for all of them since it was a duplicate name.  Now
the graphs will not build at all for anything other than my drives with
an assigned drive letter.

Any ideas?


This e-mail message and any attached files are confidential and are intended solely for the use of the addressee(s) named above. If you are not the intended recipient, any review, use, or distribution of this e-mail message and any attached files is strictly prohibited.

This communication may contain material protected by Federal privacy regulations, attorney-client work product, or other privileges. If you have received this confidential communication in error, please notify the sender immediately by reply e-mail message and permanently delete the original message. To reply to our email administrator directly, send an email to: user-40803320aaf5@xymon.invalid<mailto:user-40803320aaf5@xymon.invalid> .

If this e-mail message concerns a contract matter, be advised that no employee or agent is authorized to conclude any binding agreement on behalf of Orlando Health by e-mail without express written confirmation by an officer of the corporation. Any views or opinions presented in this e-mail are solely those of the author and do not necessarily represent those of Orlando Health.