Xymon Graphs

7 messages in this thread

list Adam Goryachev · Fri, 24 Aug 2012 02:49:33 +1000 ·

Hi, I've written a quick addon to collect the temperature of each HDD in
my system, and report the data back to Xymon like this:


      Fri Aug 24 02:33:11 EST 2012 Temp GOOD (27 degrees)

sda : 27 
sdb : 27 


Also, hobbit is putting this data in to an RRD file called temp.rrd:

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd">;
<!-- Round Robin Database Dump -->
<rrd>
        <version>0003</version>
        <step>300</step> <!-- Seconds -->
        <lastupdate>1345738019</lastupdate> <!-- 2012-08-24 02:06:59 EST -->

        <ds>
                <name> sda </name>
                <type> GAUGE </type>
                <minimal_heartbeat>600</minimal_heartbeat>
                <min>NaN</min>
                <max>NaN</max>

                <!-- PDP Status -->
                <last_ds>37</last_ds>
                <value>4.4030000000e+03</value>
                <unknown_sec> 0 </unknown_sec>
        </ds>

        <ds>
                <name> sdb </name>
                <type> GAUGE </type>
                <minimal_heartbeat>600</minimal_heartbeat>
                <min>NaN</min>
                <max>NaN</max>

                <!-- PDP Status -->
                <last_ds>39</last_ds>
                <value>4.6410000000e+03</value>
                <unknown_sec> 0 </unknown_sec>
        </ds>

So it looks (to me) as though all that is working.

I'm now trying to get the pretty graph to show up, here is my current definition which doesn't work:
[temp]
        TITLE HDD Temperature
        YAXIS Degrees
        DEF:hda=temp.rrd:hda:AVERAGE
        DEF:hdb=temp.rrd:hdb:AVERAGE
        DEF:hdc=temp.rrd:hdc:AVERAGE
        DEF:hdd=temp.rrd:hdd:AVERAGE
        DEF:hde=temp.rrd:hde:AVERAGE
        DEF:sda=temp.rrd:sda:AVERAGE
        DEF:sdb=temp.rrd:sdb:AVERAGE
        DEF:sdc=temp.rrd:sdc:AVERAGE
        DEF:sdd=temp.rrd:sdd:AVERAGE
        DEF:sde=temp.rrd:sde:AVERAGE
        LINE2:hda#FF0000:hda
        LINE2:hdb#0000FF:hdb
        LINE2:hdc#00FF00:hdc
        LINE2:hdd#FFFF00:hdd
        LINE2:hde#FF00FF:hde
        COMMENT:\n
        GPRINT:hda:LAST:hda \: %5.1lf%s (cur)
        GPRINT:hda:MAX: \: %5.1lf%s (max)
        GPRINT:hda:MIN: \: %5.1lf%s (min)
        GPRINT:hda:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdb:LAST:hdb \: %5.1lf%s (cur)
        GPRINT:hdb:MAX: \: %5.1lf%s (max)
        GPRINT:hdb:MIN: \: %5.1lf%s (min)
        GPRINT:hdb:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdc:LAST:hdc \: %5.1lf%s (cur)
        GPRINT:hdc:MAX: \: %5.1lf%s (max)
        GPRINT:hdc:MIN: \: %5.1lf%s (min)
        GPRINT:hdc:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdd:LAST:hdd \: %5.1lf%s (cur)
        GPRINT:hdd:MAX: \: %5.1lf%s (max)
        GPRINT:hdd:MIN: \: %5.1lf%s (min)
        GPRINT:hdd:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hde:LAST:hde \: %5.1lf%s (cur)
        GPRINT:hde:MAX: \: %5.1lf%s (max)
        GPRINT:hde:MIN: \: %5.1lf%s (min)
        GPRINT:hde:AVERAGE: \: %5.1lf%s (avg)\n

I think the problem is that not every machine will have the same number
of disks, nor will they have the same type of disk. Can anyone suggest
how to re-write this so that it will work?

Thanks,
Adam

-- 
Adam Goryachev
Website Managers
www.websitemanagers.com.au

list Adam Goryachev · Tue, 28 Aug 2012 08:15:18 +1000 ·

▸ quoted from Adam Goryachev

Hi, I've written a quick addon to collect the temperature of each HDD in 
my system, and report the data back to Xymon like this:


      Fri Aug 24 02:33:11 EST 2012 Temp GOOD (27 degrees)

sda : 27
sdb : 27


Also, hobbit is putting this data in to an RRD file called temp.rrd:

<?xml version="1.0" encoding="utf-8"?>


<!DOCTYPE rrd SYSTEM"http://oss.oetiker.ch/rrdtool/rrdtool.dtd">;

▸ quoted from Adam Goryachev

<!-- Round Robin Database Dump -->
<rrd>
         <version>0003</version>
         <step>300</step> <!-- Seconds -->
         <lastupdate>1345738019</lastupdate> <!-- 2012-08-24 02:06:59 EST -->

         <ds>
                 <name> sda </name>
                 <type> GAUGE </type>
                 <minimal_heartbeat>600</minimal_heartbeat>
                 <min>NaN</min>
                 <max>NaN</max>

                 <!-- PDP Status -->
                 <last_ds>37</last_ds>
                 <value>4.4030000000e+03</value>
                 <unknown_sec> 0 </unknown_sec>
         </ds>

         <ds>
                 <name> sdb </name>
                 <type> GAUGE </type>
                 <minimal_heartbeat>600</minimal_heartbeat>
                 <min>NaN</min>
                 <max>NaN</max>

                 <!-- PDP Status -->
                 <last_ds>39</last_ds>
                 <value>4.6410000000e+03</value>
                 <unknown_sec> 0 </unknown_sec>
         </ds>

So it looks (to me) as though all that is working.

I'm now trying to get the pretty graph to show up, here is my current definition which doesn't work:
[temp]
         TITLE HDD Temperature
         YAXIS Degrees
         DEF:hda=temp.rrd:hda:AVERAGE
         DEF:hdb=temp.rrd:hdb:AVERAGE
         DEF:hdc=temp.rrd:hdc:AVERAGE
         DEF:hdd=temp.rrd:hdd:AVERAGE
         DEF:hde=temp.rrd:hde:AVERAGE
         DEF:sda=temp.rrd:sda:AVERAGE
         DEF:sdb=temp.rrd:sdb:AVERAGE
         DEF:sdc=temp.rrd:sdc:AVERAGE
         DEF:sdd=temp.rrd:sdd:AVERAGE
         DEF:sde=temp.rrd:sde:AVERAGE
         LINE2:hda#FF0000:hda
         LINE2:hdb#0000FF:hdb
         LINE2:hdc#00FF00:hdc
         LINE2:hdd#FFFF00:hdd
         LINE2:hde#FF00FF:hde
         COMMENT:\n
         GPRINT:hda:LAST:hda \: %5.1lf%s (cur)
         GPRINT:hda:MAX: \: %5.1lf%s (max)
         GPRINT:hda:MIN: \: %5.1lf%s (min)
         GPRINT:hda:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hdb:LAST:hdb \: %5.1lf%s (cur)
         GPRINT:hdb:MAX: \: %5.1lf%s (max)
         GPRINT:hdb:MIN: \: %5.1lf%s (min)
         GPRINT:hdb:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hdc:LAST:hdc \: %5.1lf%s (cur)
         GPRINT:hdc:MAX: \: %5.1lf%s (max)
         GPRINT:hdc:MIN: \: %5.1lf%s (min)
         GPRINT:hdc:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hdd:LAST:hdd \: %5.1lf%s (cur)
         GPRINT:hdd:MAX: \: %5.1lf%s (max)
         GPRINT:hdd:MIN: \: %5.1lf%s (min)
         GPRINT:hdd:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hde:LAST:hde \: %5.1lf%s (cur)
         GPRINT:hde:MAX: \: %5.1lf%s (max)
         GPRINT:hde:MIN: \: %5.1lf%s (min)
         GPRINT:hde:AVERAGE: \: %5.1lf%s (avg)\n

I think the problem is that not every machine will have the same number 
of disks, nor will they have the same type of disk. Can anyone suggest 
how to re-write this so that it will work?

Thanks,
Adam

-- 
Adam Goryachev
Website Managers
www.websitemanagers.com.au

list Adam Goryachev · Tue, 28 Aug 2012 08:47:46 +1000 ·

Hi, I've written a quick addon to collect the temperature of each HDD in 
my system, and report the data back to Xymon like this:


      Fri Aug 24 02:33:11 EST 2012 Temp GOOD (27 degrees)

sda : 27
sdb : 27


Also, hobbit is putting this data in to an RRD file called temp.rrd:

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE rrd SYSTEM"http://oss.oetiker.ch/rrdtool/rrdtool.dtd">;
<!-- Round Robin Database Dump -->
<rrd>
         <version>0003</version>
         <step>300</step> <!-- Seconds -->
         <lastupdate>1345738019</lastupdate> <!-- 2012-08-24 02:06:59 EST -->

         <ds>
                 <name> sda </name>
                 <type> GAUGE </type>
                 <minimal_heartbeat>600</minimal_heartbeat>
                 <min>NaN</min>
                 <max>NaN</max>

                 <!-- PDP Status -->
                 <last_ds>37</last_ds>
                 <value>4.4030000000e+03</value>
                 <unknown_sec> 0 </unknown_sec>
         </ds>

         <ds>
                 <name> sdb </name>
                 <type> GAUGE </type>
                 <minimal_heartbeat>600</minimal_heartbeat>
                 <min>NaN</min>
                 <max>NaN</max>

                 <!-- PDP Status -->
                 <last_ds>39</last_ds>
                 <value>4.6410000000e+03</value>
                 <unknown_sec> 0 </unknown_sec>
         </ds>

So it looks (to me) as though all that is working.

I'm now trying to get the pretty graph to show up, here is my current definition which doesn't work:
[temp]
         TITLE HDD Temperature
         YAXIS Degrees
         DEF:hda=temp.rrd:hda:AVERAGE
         DEF:hdb=temp.rrd:hdb:AVERAGE
         DEF:hdc=temp.rrd:hdc:AVERAGE
         DEF:hdd=temp.rrd:hdd:AVERAGE
         DEF:hde=temp.rrd:hde:AVERAGE
         DEF:sda=temp.rrd:sda:AVERAGE
         DEF:sdb=temp.rrd:sdb:AVERAGE
         DEF:sdc=temp.rrd:sdc:AVERAGE
         DEF:sdd=temp.rrd:sdd:AVERAGE
         DEF:sde=temp.rrd:sde:AVERAGE
         LINE2:hda#FF0000:hda
         LINE2:hdb#0000FF:hdb
         LINE2:hdc#00FF00:hdc
         LINE2:hdd#FFFF00:hdd
         LINE2:hde#FF00FF:hde
         COMMENT:\n
         GPRINT:hda:LAST:hda \: %5.1lf%s (cur)
         GPRINT:hda:MAX: \: %5.1lf%s (max)
         GPRINT:hda:MIN: \: %5.1lf%s (min)
         GPRINT:hda:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hdb:LAST:hdb \: %5.1lf%s (cur)
         GPRINT:hdb:MAX: \: %5.1lf%s (max)
         GPRINT:hdb:MIN: \: %5.1lf%s (min)
         GPRINT:hdb:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hdc:LAST:hdc \: %5.1lf%s (cur)
         GPRINT:hdc:MAX: \: %5.1lf%s (max)
         GPRINT:hdc:MIN: \: %5.1lf%s (min)
         GPRINT:hdc:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hdd:LAST:hdd \: %5.1lf%s (cur)
         GPRINT:hdd:MAX: \: %5.1lf%s (max)
         GPRINT:hdd:MIN: \: %5.1lf%s (min)
         GPRINT:hdd:AVERAGE: \: %5.1lf%s (avg)\n
         GPRINT:hde:LAST:hde \: %5.1lf%s (cur)
         GPRINT:hde:MAX: \: %5.1lf%s (max)
         GPRINT:hde:MIN: \: %5.1lf%s (min)
         GPRINT:hde:AVERAGE: \: %5.1lf%s (avg)\n

I think the problem is that not every machine will have the same number 
of disks, nor will they have the same type of disk. Can anyone suggest 
how to re-write this so that it will work?

Thanks,
Adam

list Jeremy Laidman · Tue, 28 Aug 2012 13:26:02 +1000 ·

To handle variable numbers of disks with varying disk names, you need to
end up with multiple RRD files, named (eg) temp,hda.rrd, temp,hdb.rrd, and
so on.

To have xymond_rrd generate separate RRD files, you need to use SPLITNCV in
xymonserver.cfg instead of NCV, like:

SPLITNCV_temp="*:gauge"

You'll need to restart Xymon, or at least kill off all of the xymond_rrd
processes, and you should start getting multiple RRD files.  Then you can
use something like this in graphs.cfg:

[temp]
        TITLE HDD Temperature
        YAXIS Degrees
        FNPATTERN temp,(.*).rrd
        DEF:disk at RRDIDX@=@RRDFN@:lambda:AVERAGE
        LINE2:disk at RRDIDX@#@COLOR@:@RRDPARAM@
        COMMENT:\n
        GPRINT:disk at RRDIDX@:LAST: \: %5.1lf%s (cur)
        GPRINT:disk at RRDIDX@:MAX: \: %5.1lf%s (max)
        GPRINT:disk at RRDIDX@:MIN: \: %5.1lf%s (min)
        GPRINT:disk at RRDIDX@:AVERAGE: \: %5.1lf%s (avg)\n

J

▸ quoted from Adam Goryachev



On 28 August 2012 08:47, Adam Goryachev <user-eaec2ffb4cbc@xymon.invalid> wrote:

 Hi, I've written a quick addon to collect the temperature of each HDD in
my system, and report the data back to Xymon like this:

 Fri Aug 24 02:33:11 EST 2012 Temp GOOD (27 degrees)

sda : 27
sdb : 27


Also, hobbit is putting this data in to an RRD file called temp.rrd:

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE rrd SYSTEM "http://oss.oetiker.ch/rrdtool/rrdtool.dtd"; <http://oss.oetiker.ch/rrdtool/rrdtool.dtd>>;
<!-- Round Robin Database Dump -->
<rrd>
        <version>0003</version>
        <step>300</step> <!-- Seconds -->
        <lastupdate>1345738019</lastupdate> <!-- 2012-08-24 02:06:59 EST -->

        <ds>
                <name> sda </name>
                <type> GAUGE </type>
                <minimal_heartbeat>600</minimal_heartbeat>
                <min>NaN</min>
                <max>NaN</max>

                <!-- PDP Status -->
                <last_ds>37</last_ds>
                <value>4.4030000000e+03</value>
                <unknown_sec> 0 </unknown_sec>
        </ds>

        <ds>
                <name> sdb </name>
                <type> GAUGE </type>
                <minimal_heartbeat>600</minimal_heartbeat>
                <min>NaN</min>
                <max>NaN</max>

                <!-- PDP Status -->
                <last_ds>39</last_ds>
                <value>4.6410000000e+03</value>
                <unknown_sec> 0 </unknown_sec>
        </ds>

So it looks (to me) as though all that is working.

I'm now trying to get the pretty graph to show up, here is my current definition which doesn't work:
[temp]
        TITLE HDD Temperature
        YAXIS Degrees
        DEF:hda=temp.rrd:hda:AVERAGE
        DEF:hdb=temp.rrd:hdb:AVERAGE
        DEF:hdc=temp.rrd:hdc:AVERAGE
        DEF:hdd=temp.rrd:hdd:AVERAGE
        DEF:hde=temp.rrd:hde:AVERAGE
        DEF:sda=temp.rrd:sda:AVERAGE
        DEF:sdb=temp.rrd:sdb:AVERAGE
        DEF:sdc=temp.rrd:sdc:AVERAGE
        DEF:sdd=temp.rrd:sdd:AVERAGE
        DEF:sde=temp.rrd:sde:AVERAGE
        LINE2:hda#FF0000:hda
        LINE2:hdb#0000FF:hdb
        LINE2:hdc#00FF00:hdc
        LINE2:hdd#FFFF00:hdd
        LINE2:hde#FF00FF:hde
        COMMENT:\n
        GPRINT:hda:LAST:hda \: %5.1lf%s (cur)
        GPRINT:hda:MAX: \: %5.1lf%s (max)
        GPRINT:hda:MIN: \: %5.1lf%s (min)
        GPRINT:hda:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdb:LAST:hdb \: %5.1lf%s (cur)
        GPRINT:hdb:MAX: \: %5.1lf%s (max)
        GPRINT:hdb:MIN: \: %5.1lf%s (min)
        GPRINT:hdb:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdc:LAST:hdc \: %5.1lf%s (cur)
        GPRINT:hdc:MAX: \: %5.1lf%s (max)
        GPRINT:hdc:MIN: \: %5.1lf%s (min)
        GPRINT:hdc:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdd:LAST:hdd \: %5.1lf%s (cur)
        GPRINT:hdd:MAX: \: %5.1lf%s (max)
        GPRINT:hdd:MIN: \: %5.1lf%s (min)
        GPRINT:hdd:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hde:LAST:hde \: %5.1lf%s (cur)
        GPRINT:hde:MAX: \: %5.1lf%s (max)
        GPRINT:hde:MIN: \: %5.1lf%s (min)
        GPRINT:hde:AVERAGE: \: %5.1lf%s (avg)\n


I think the problem is that not every machine will have the same number of
disks, nor will they have the same type of disk. Can anyone suggest how to
re-write this so that it will work?

Thanks,
Adam

list W.J.M. Nelis · Tue, 28 Aug 2012 07:39:46 +0200 ·

Hello,

▸ quoted from Jeremy Laidman

Hi, I've written a quick addon to collect the temperature of each HDD in my
system, and report the data back to Xymon like this:


      Fri Aug 24 02:33:11 EST 2012 Temp GOOD (27 degrees)

sda : 27
sdb : 27


Also, hobbit is putting this data in to an RRD file called temp.rrd:

........

I think the problem is that not every machine will have the same number of
disks, nor will they have the same type of disk. Can anyone suggest how to
re-write this so that it will work?

An approach is not to monitor the temperatures of the individual disks, but to monitor the temperature of the group of disks on a single host. The rationale of this approach is that normally one is interested in the range of temperature values, combined with an alert if at least one temperature is out of range.

I've used this approach to monitor 'the temperature' of a switch. The number of temperature sensors per switch varies from 1 to 29 (!). The returned value is the minimum, average and maximum temperature, thus always three values per switch.

HTH,
   Wim Nelis.


******************************************************************************************************************

The NLR disclaimer is valid for NLR e-mail messages.

This message is only meant for providing information. Nothing in this e-mail message amounts to a contractual
or legal commitment on the part of the sender.
This message may contain information that is not intended for you. If you are not the addressee or if this
message was sent to you by mistake, you are requested to inform the sender and delete the message.
Sender accepts no liability for damage of any kind resulting from the risks inherent in the electronic
transmission of messages.
 ******************************************************************************************************************

list Adam Goryachev · Tue, 28 Aug 2012 16:00:26 +1000 ·

▸ quoted from W.J.M. Nelis

On 08/28/2012 03:39 PM, W.J.M. Nelis wrote:

Hello,

Hi, I've written a quick addon to collect the temperature of each HDD in my
system, and report the data back to Xymon like this:


      Fri Aug 24 02:33:11 EST 2012 Temp GOOD (27 degrees)

sda : 27
sdb : 27


Also, hobbit is putting this data in to an RRD file called temp.rrd:

........
An approach is not to monitor the temperatures of the individual disks, but to monitor the temperature of the group of disks on a single host. The rationale of this approach is that normally one is interested in the range of temperature values, combined with an alert if at least one temperature is out of range.

I've used this approach to monitor 'the temperature' of a switch. The number of temperature sensors per switch varies from 1 to 29 (!). The returned value is the minimum, average and maximum temperature, thus always three values per switch.

I wanted to monitor each individual disk for the following reasons:
1) To see if one drive is failing, maybe it will have a much higher temp than the others
2) Since each drive is in a different position, it is nice to see the effect that this has on the individual drive temp

I can see why it would be pointless to get 29 different temp readings from a single switch, I can't imagine that the temp would vary much between all of those, and it isn't going to have individual parts that can be replaced like you can with individual drives in a server.

Regards,
Adam

list Joel Carnat · Tue, 28 Aug 2012 08:11:07 +0200 ·

Hello,

I'm using multiple RRD (one per disk) and serial number as disk reference. The graph uses FNPATTERN to graph 'all files for a host'.

See my notes here http://www.tumfatig.net/20120426/monitor-synology-disk-temperature-from-snmp/
The graph definition is:
[snmp_disktemp]
        FNPATTERN ^snmp_disktemp.(.+).rrd
        TITLE Disk Temperature
        YAXIS Celcius
        -l 0
        -E
        DEF:temp at RRDIDX@=@RRDFN@:temp:AVERAGE
        LINE:temp at RRDIDX@#@COLOR@:@RRDPARAM@
        GPRINT:temp at RRDIDX@:LAST:%3.0lfC (cur)
        GPRINT:temp at RRDIDX@:MIN:%3.0lfC (min)
        GPRINT:temp at RRDIDX@:AVERAGE:%3.0lfC (avg)
        GPRINT:temp at RRDIDX@:MAX:%3.0lfC (max)\l

Regards,
	Jo

▸ quoted from Adam Goryachev


Le 28 août 2012 à 00:47, Adam Goryachev a écrit :

Hi, I've written a quick addon to collect the temperature of each HDD in my system, and report the data back to Xymon like this:

Fri Aug 24 02:33:11 EST 2012 Temp GOOD (27 degrees)

sda : 27 
sdb : 27 


Also, hobbit is putting this data in to an RRD file called temp.rrd:

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE rrd SYSTEM 
"http://oss.oetiker.ch/rrdtool/rrdtool.dtd";

<!-- Round Robin Database Dump -->
<rrd>
        <version>0003</version>
        <step>300</step> <!-- Seconds -->
        <lastupdate>1345738019</lastupdate> <!-- 2012-08-24 02:06:59 EST -->

        <ds>
                <name> sda </name>
                <type> GAUGE </type>
                <minimal_heartbeat>600</minimal_heartbeat>
                <min>NaN</min>
                <max>NaN</max>

                <!-- PDP Status -->
                <last_ds>37</last_ds>
                <value>4.4030000000e+03</value>
                <unknown_sec> 0 </unknown_sec>
        </ds>

        <ds>
                <name> sdb </name>
                <type> GAUGE </type>
                <minimal_heartbeat>600</minimal_heartbeat>
                <min>NaN</min>
                <max>NaN</max>

                <!-- PDP Status -->
                <last_ds>39</last_ds>
                <value>4.6410000000e+03</value>
                <unknown_sec> 0 </unknown_sec>
        </ds>

So it looks (to me) as though all that is working.

I'm now trying to get the pretty graph to show up, here is my current definition which doesn't work:
[temp]
        TITLE HDD Temperature
        YAXIS Degrees
        DEF:hda=temp.rrd:hda:AVERAGE
        DEF:hdb=temp.rrd:hdb:AVERAGE
        DEF:hdc=temp.rrd:hdc:AVERAGE
        DEF:hdd=temp.rrd:hdd:AVERAGE
        DEF:hde=temp.rrd:hde:AVERAGE
        DEF:sda=temp.rrd:sda:AVERAGE
        DEF:sdb=temp.rrd:sdb:AVERAGE
        DEF:sdc=temp.rrd:sdc:AVERAGE
        DEF:sdd=temp.rrd:sdd:AVERAGE
        DEF:sde=temp.rrd:sde:AVERAGE
        LINE2:hda#FF0000:hda
        LINE2:hdb#0000FF:hdb
        LINE2:hdc#00FF00:hdc
        LINE2:hdd#FFFF00:hdd
        LINE2:hde#FF00FF:hde
        COMMENT:\n
        GPRINT:hda:LAST:hda \: %5.1lf%s (cur)
        GPRINT:hda:MAX: \: %5.1lf%s (max)
        GPRINT:hda:MIN: \: %5.1lf%s (min)
        GPRINT:hda:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdb:LAST:hdb \: %5.1lf%s (cur)
        GPRINT:hdb:MAX: \: %5.1lf%s (max)
        GPRINT:hdb:MIN: \: %5.1lf%s (min)
        GPRINT:hdb:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdc:LAST:hdc \: %5.1lf%s (cur)
        GPRINT:hdc:MAX: \: %5.1lf%s (max)
        GPRINT:hdc:MIN: \: %5.1lf%s (min)
        GPRINT:hdc:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hdd:LAST:hdd \: %5.1lf%s (cur)
        GPRINT:hdd:MAX: \: %5.1lf%s (max)
        GPRINT:hdd:MIN: \: %5.1lf%s (min)
        GPRINT:hdd:AVERAGE: \: %5.1lf%s (avg)\n
        GPRINT:hde:LAST:hde \: %5.1lf%s (cur)
        GPRINT:hde:MAX: \: %5.1lf%s (max)
        GPRINT:hde:MIN: \: %5.1lf%s (min)
        GPRINT:hde:AVERAGE: \: %5.1lf%s (avg)\n


I think the problem is that not every machine will have the same number of disks, nor will they have the same type of disk. Can anyone suggest how to re-write this so that it will work?

Thanks,
Adam

Xymon Graphs 🔗 link

Xymon Graphs