If you go through the whole thread, there's a lot of good information
regarding troubleshooting graph generation in there:
http://www.hswn.dk/hobbiton/2005/12/msg00201.html
Hope that helps,
Mark
-----Original Message-----
From: user-d54077869176@xymon.invalid [mailto:user-d54077869176@xymon.invalid]
Sent: Thursday, March 11, 2010 12:58 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] Graphs not working on individual views, but
working on trends view
On Thu, 11 Mar 2010 19:46:57 +1100, David Baldwin
<user-cbbf693f2c89@xymon.invalid> wrote:
user-d54077869176@xymon.invalid wrote:
On Wed, 10 Mar 2010 11:31:31 -0800, "Mark Stoltzfus"
<user-5b4ba45c8394@xymon.invalid> wrote:
Hi, we just did a forklift upgrade from our old Hobbit servers to
two
brand new boxes running Xymon 4.2.3, and for the most part, it's
been
a
seemless transition. We noticed some strange behavior, though, with
the
graphs. The graphs under disk, cpu, and memory don't show up, but
under
trends, they show up just fine. I took a look at the different
shortcuts, and they look very similar to me, with the differences
highlighted in red:
Link copied from "disk" section:
https://monitor.us.corp.pmigroup.com/xymon-cgi/hobbitgraph.sh?host=wal-d
dbs-01.us.corp.pmigroup.com&service=disk&graph_width=576&graph_heigh
t=120&first=1&count=3&disp=wal%2dddbs%2d01%2eus%2ecorp%2epmigroup%2ecom&
graph=hourly&action=selzoom
Link copied from "trends" section:
https://monitor.us.corp.pmigroup.com/xymon-cgi/hobbitgraph.sh?host=wal-d
dbs-01.us.corp.pmigroup.com&service=disk&graph_width=576&graph_heigh
t=120&first=1&count=3&disp=wal%2dddbs%2d01%2eus%2ecorp%2epmigroup%2ecom&
nostale&color=green&graph=hourly&action=selzoom
Any ideas as to what's going on? I did find some old posts from
Henrik
about troubleshooting graph generation, but the case he was dealing
with
there was where the graphs wouldn't generate at all. In this case,
the
rrds are all there and the graphs are being generated, just not in
all
views.
Thoughts?
Mark
Hi,
I got different issue with graphs, but I think my problem should be
related to your comment :
" I did find some old posts from Henrik about troubleshooting graph
generation, but the case he was dealing with there was where the
graphs
wouldn't generate at all."
It's worth checking hobbitgraph.cfg if you have added a number of your
own custom graphs.
The FNPATTERN operator is doing a regexp match, but in some cases the
default pattern definition is very loose.
For example, I'd added a bunch of devmon based system health check
reporting stuff which generated file names like
/var/lib/hobbit/rrd/HOSTNAME/temp.memory11.rrd
These were causing the memory graph to die because it was attempting
to
query non-conformant RRDs for the particular graph. Solved by
tightening
the regexp definition as below (adding ^ in front, which means the
filename has to start with memory, not just have it as a substring).
[memory]
FNPATTERN ^memory.(.+).rrd
TITLE Memory Utilization
Note that the FNPATTERN is not used when deciding if there are any RRD
files to use to display a graph at all on the test status page. It
just
seems to glob TEST*.rrd to count the number of files to decide how
many
lines to display on the graph for TEST. This is with 4.2.3.
David.
Thank you for your advices. I migrated my xymon server (and some
clients)
to 4.3.0-0.beta2, without migrating (is it needed anyway ?) my rrd
files.
My issue is very simple (and strange), I've 7 partitions monitored by
xymon, all are reported correctly. I've 2 graphs for 3 partitions, but
there should be a 3rd one for the 7th partition. Instead, I've a broken
link.
I've the same issue on custom tests/graphs. Many datas are graphed, but
some graphs are missing. I think there should have a way to deal with
it,
in modifying how many values are on the same graph, or in correcting the
root cause. Actually I don't have any skill in C nor php, so I can't
solve
it myself.
Do you think this behaviour is related to your advice (changing
FNPATTERN)
?
Regards,
Damien