Installing Hobit Client in HPUX

Note that you unpacked the tarball relative to your current directory at
the time.  If that wasn't /, then you're going to have issues.  The last
time I installed an hp-ux client, there was a depot installer package
available, also.

On Wed, April 2, 2008 02:49, pkc_mls wrote:

Jacob, Davis a écrit :

Hi,

A quick introduction, I am Davis Jacob a member of the System
Engineering team.

I am getting a problem when trying to install the client in HPUX
machine.

When I untar the client version, I get this message;

tar -xvf hobbit_hpux.tar

x ./etc/rc.config.d/hobbit-client, 880 bytes, 2 tape blocks

x ./sbin/init.d/hobbit-client, 3497 bytes, 7 tape blocks

x ./usr/local/libexec/hobbit/client/bin/bb, 82172 bytes, 161 tape blocks

x ./usr/local/libexec/hobbit/client/bin/bbcmd, 69884 bytes, 137 tape
blocks

x ./usr/local/libexec/hobbit/client/bin/bbhostgrep, 86268 bytes, 169
tape blocks

x ./usr/local/libexec/hobbit/client/bin/bbhostshow, 69884 bytes, 137
tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-aix.sh, 1452
bytes, 3 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-darwin.sh, 1164
bytes, 3 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-freebsd.sh, 1462
bytes, 3 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-hp-ux.sh, 1565
bytes, 4 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-linux.sh, 1363
bytes, 3 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-netbsd.sh, 1399
bytes, 3 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-openbsd.sh, 1396
bytes, 3 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-osf1.sh, 1346
bytes, 3 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient-sunos.sh, 1652
bytes, 4 tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitclient.sh, 1387 bytes, 3
tape blocks

x ./usr/local/libexec/hobbit/client/bin/hobbitlaunch, 78076 bytes, 153
tape blocks

x ./usr/local/libexec/hobbit/client/bin/hpux-meminfo, 20732 bytes, 41
tape blocks

x ./usr/local/libexec/hobbit/client/etc/clientlaunch.cfg, 349 bytes, 1
tape blocks

x ./usr/local/libexec/hobbit/client/etc/hobbitclient.cfg, 1783 bytes,
4 tape blocks

this is the config file you need to set up to define your hobbit server.

x ./usr/local/libexec/hobbit/client/runclient.sh, 2962 bytes, 6 tape
blocks

the client has to be launched via runclient.sh.
or via one of the starting scripts /sbin/init.d/hobbit-client.

x ./usr/local/var/run/hobbitclient-runtime.cfg, 0 bytes, 0 tape blocks

But I don’t see any installable in it. The HPUX version running is
B.11.11

Can you please help me with this.

Thanks in advance,

Davis