here exactly the same script that we use also but with minor tweaks we did.
you have to add a tag on the device configuration in hosts.cfg : emcstorage
you can use emcstorage:EXCLUDE=[A0|A1|A2|B0|B2|B1] to exclude the port A0 A1 A2 B0 B2 B1 for instance.
#!/bin/bash
#
#
##--[special env]----
echo -n "Start "
date
navicli=/opt/xymon/server/ext/emc/navicli # Where is the NAVICLI cmd
GAWK=/bin/awk # need GNU AWK
TEST="hardware" # The BB test name
##---[Check XYMONHOME is set]--------------------------------
if test "$XYMONHOME" = ""; then
echo "XYMONHOME is not set... exiting"; exit 1
fi
if [ ! -x $GAWK ]; then
echo "This agent need GNU Awk, check GAWK variable"; exit 1
fi
if test ! "$XYMONTMP"; then
XYMONTMP=$XYMONHOME/tmp
fi
xymongrep emcstorage* | while read ligne
do
SPIP=`echo $ligne | awk '{print $1}'`
EMC_ARRAY=`echo $ligne | awk '{print $2}'`
# patch nli cf down (cf lines 117)
PORTS_EX=`echo $ligne | grep EXCLUDE | sed "s/.*EXCLUDE=\[\(.*\)\]/\1/"`
PORTS_EX=`echo $PORTS_EX | sed 's/|/ /g'`
TEST="hardware" # The XYMON test name
MYTMPFILE=CLARIION_STATUS.$$ # Use a buffer tmp file for NAVICLI output
XYMONPROG=XYMON_CLARiiON; export XYMONPROG # ???
#---[1. Get cache status]---------------------------------------------------------
$navicli -h $SPIP getcache > $XYMONTMP/$MYTMPFILE
$CAT $XYMONTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /SP Write|Read Cache State/) {
sub (" *"," ")
if ($0 ~ /State Enabled/) {
sub (" State Enabled","")
sub ("^","\\&green ")
} else {
sub (" State .*","")
sub ("^","\\&red ")
}
if ($0 !~ /SP Read Cache/) {
print
}
}
}' > $XYMONTMP/ITC_CLARiiON.CACHE.OUT.$$
#---[Check global color output]---
$CAT $XYMONTMP/ITC_CLARiiON.CACHE.OUT.$$ | grep \&red > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=red
else
COLOR=green
fi
#---[Generate information to send]---
LINE="status $EMC_ARRAY.cache $COLOR `date`
`cat $XYMONTMP/ITC_CLARiiON.CACHE.OUT.$$`"
echo $EMC_ARRAY
cat $XYMONTMP/ITC_CLARiiON.CACHE.OUT.$$
$XYMON $BBDISP "$LINE"
rm $XYMONTMP/ITC_CLARiiON.CACHE.OUT.$$
#---[2. Port status]--------------------------------------------------------------
$navicli -h $SPIP port -list > $XYMONTMP/$MYTMPFILE
$CAT $XYMONTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /Information about each SPPORT:/) {
FLAG=1
}
if (FLAG == 1) {
if (($0 ~ /SP Name/) || ($0 ~ /SP Port ID/) || ($0 ~ /Link Status/) || ($0 ~ /Port Status/)) {
sub (" *","")
if ($0 ~ /SP Name/) {
sub ("SP Name:","")
SP=$0
}
if ($0 ~ /SP Port ID/) {
sub ("SP Port ID:","Port ")
Port=$0
}
if ($0 ~ /Link Status/) {
if ($0 ~ /Status:Up/) {
sub ("Status:Up","\\&green")
} else {
sub ("Status:.*","\\&red")
}
LinkS=$0
}
if ($0 ~ /Port Status/) {
if ($0 ~ /Status:Online/) {
sub ("Status:Online","\\&green")
} else if ( $0 ~ /Status:DISABLED/ ) {
# port not activated, link down -> ok , gch 20080327
sub ("red","green",LinkS)
} else {
sub ("Status:.*","\\&red")
}
sub ("Port","Status")
PortS=$0
sub ("Status:","",PortS)
sub ("Status:","",LinkS)
print SP,Port,PortS,LinkS
}
}
}
}' > $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$
# patch nli (ubber crado)
for ex in $PORTS_EX
do
SP=`echo $ex | sed 's/\([A-Z]\).*/\1/'`
PORT=`echo $ex | sed 's/.*\([0-9]\)/\1/'`
EXCLUDE="SP $SP Port $PORT"
grep -v "$EXCLUDE" $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$ > $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$.new
mv $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$.new $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$
done
#---[Check global color output]---
$CAT $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$ | grep \&red > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=red
else
COLOR=green
fi
#---[Generate information to send]---
LINE="status $EMC_ARRAY.port $COLOR `date`
`cat $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$`"
$XYMON $BBDISP "$LINE"
rm $XYMONTMP/ITC_CLARiiON.PORT.OUT.$$
#---[3. DPE/DAE Status]-----------------------------------------------------------
$navicli -h $SPIP getcrus > $XYMONTMP/$MYTMPFILE
$CAT $XYMONTMP/$MYTMPFILE | $GAWK '
{
if (($0 ~ /[DPE|DAE] Bus . Enclosure ./) || ($0 ~ /State/)) {
if ($0 ~ /State/) {
sub ("Bus . Enclosure . ","")
sub (" *"," ")
sub ("Power","Power Supply")
if ($0 ~ /State: Valid/) {
sub ("Valid","Present")
}
if ($0 ~ /State: Present/) {
sub (" State: Present","")
sub ("^","\\&green ")
}
else {
sub (" State:.*","")
sub ("^","\\&red ")
}
}
if ($0 ~ /[DPE|DAE] Bus . Enclosure ./) {
print ""
}
print
if ($0 ~ /[DPE|DAE] Bus . Enclosure ./) {
print "----------------------------"
}
}
}' > $XYMONTMP/ITC_CLARiiON.HARD.OUT.$$
#---[Check global color output]---
$CAT $XYMONTMP/ITC_CLARiiON.HARD.OUT.$$ | grep \&red > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=red
else
COLOR=green
fi
#---[Generate information to send]---
LINE="status $EMC_ARRAY.hardware $COLOR `date`
`cat $XYMONTMP/ITC_CLARiiON.HARD.OUT.$$`"
$XYMON $BBDISP "$LINE"
rm $XYMONTMP/ITC_CLARiiON.HARD.OUT.$$
#---[4. Disks status]-------------------------------------------------------------
$navicli -h $SPIP getdisk -state > $XYMONTMP/$MYTMPFILE
$CAT $XYMONTMP/$MYTMPFILE | $GAWK ' BEGIN { FLAG=0 }
{
if (FLAG == 1) {
sub (" *","")
sub ("State:","")
status=$0
FLAG=0
hotspare=""
if ($0 ~ /Hot Spare/) {
sub ("Hot Spare ","",status)
hotspare="(Hot Spare)"
}
if (status ~ /Empty/) { status="&clear" }
else {
if ((status ~ /Enabled/) || (status ~ /Ready/) || (status ~ /Unbound/) || (status ~ /Binding/)) { status="&green" }
else { status="&red" }
}
print status,"Disk",disk,hotspare
if (FLAG == 1) {
sub (" *","")
sub ("State:","")
status=$0
FLAG=0
hotspare=""
if ($0 ~ /Hot Spare/) {
sub ("Hot Spare ","",status)
hotspare="(Hot Spare)"
}
if (status ~ /Empty/) { status="&clear" }
else {
if ((status ~ /Enabled/) || (status ~ /Ready/) || (status ~ /Unbound/) || (status ~ /Binding/)) { status="&green" }
else { status="&red" }
}
print status,"Disk",disk,hotspare
}
if (($0 ~ /Bus +[0-9]+ +Enclosure +[0-9]+ +Disk +[0-9]+/) && (FLAG == 0)) {
sub ("Bus +","")
sub (" +Enclosure +","-")
sub (" +Disk +","-")
disk=$0
FLAG=1
}
}' > $XYMONTMP/ITC_CLARiiON.DISK.OUT.$$
#---[Check global color output]---
$CAT $XYMONTMP/ITC_CLARiiON.DISK.OUT.$$ | grep \&red > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=red
else
COLOR=green
fi
#---[Generate information to send]---
LINE="status $EMC_ARRAY.disks $COLOR `date`
`cat $XYMONTMP/ITC_CLARiiON.DISK.OUT.$$`"
$XYMON $BBDISP "$LINE"
rm $XYMONTMP/ITC_CLARiiON.DISK.OUT.$$
rm $XYMONTMP/$MYTMPFILE
done
Le 21 sept. 2012 à 17:15, Scott Pfister a écrit :
Here's a script we used to monitor clariion. It requires the navicli
to be installed on the host that runs the monitoring script. In our
case it was the xymon server. We also found it better to split the
test accross both service processors. Hence the SPIP and SPIP2
variables. Ours had no NAS so we didn't montitor anything there.
This was on the old deadcat site and we tweaked it a little.
#!/bin/sh
#set -x
#-------------------------------------------------
# Big Brother - EMC CLARiiON FC-4700 Hardware Agent
#
# This agent monitor the hardware of an EMC
# CLARiiON FC-4700 Array using the Navisphere
# Command Line Interface (NAVICLI)
#
# Author: Sabey (user-43ea55938b1e@xymon.invalid)
#
# Feel free to improve or modify.
#
#==================================================
# History
#--------------------------------------------------
# Fri Feb 22 11:44:08 MET 2008
# added global state yellow and Disk status
#
# Notes:
# If a disk failed, it was shown yellow in it`s list, but the global
# status was unchanged. This is fixed now
#
# The Disks will show now the status of a binding action in %
# the same for replacement of a disk
#
#
# Tue Aug 19 21:34:15 GMT 2003
# Docs and fixes by N. Rettinghouse (user-614bda5aae0a@xymon.invalid)
#
# Notes:
# GNU GAWK is needed. (www.sunfreeware.com for Solaris)
# Copy clariion.sh into the bb/ext directory.
# Add the following to your bb/etc/bb-bbexttab:
# localhost : : clariion.sh
# A restart of BigBro will be needed after adding bb-bbexttab.
# Configure the variables shown below.
# Add the BigBrother user to the /etc/Navisphere/agent.config file to
# allow running of navicli.
# Changed "HW" to "hw" to be consistant with other bb services.
# Fixed conflict with $MACHINE BigBro internal variable.
# Configure bb-hosts like this:
# 10.10.30.34 SAN-BigusDiskus # testip noping
#
#---------------------------------------------------
# Thu Sep 4 11:57:48 EDT 2003
# Docs and fixes by Sabey (user-43ea55938b1e@xymon.invalid)
#
# Notes:
# Add support to CLARiiON CX600 (maybe all CX series...)
#
#############################################################################
### Set these as needed. ####################################################
#S#SPIP=172.25.2.239 # One of the two SP IP address
#S#EMC_ARRAY="CLARiiON-1" # The name of your CLARiiON array
SPIP= # One of the two SP IP address
SPIP2= # One of the two SP IP address
EMC_ARRAY="emcsan" # The name of your CLARiiON array
navicli=/opt/Navisphere/bin/navicli # Where is the NAVICLI cmd
GAWK=/usr/bin/awk # need GNU AWK
#############################################################################
#############################################################################
TEST="emc" # The BB test name
MYTMPFILE=CLARIION_STATUS.$$ # Use a buffer tmp file for NAVICLI output
BBPROG=BB_CLARiiON; export BBPROG # ???
##---[Check BBHOME is set]--------------------------------
if test "$BBHOME" = ""; then
echo "BBHOME is not set... exiting"; exit 1
fi
if [ ! -x $GAWK ]; then
echo "This agent need GNU Awk, check GAWK variable"; exit 1
fi
#---[Load bb global parameter]---------------------------
if test ! "$BBTMP"; then
. $BBHOME/etc/bbdef.sh
fi
#---[Collect DATA]---------------------------------------
echo "Status of ${EMC_ARRAY} Storage System" > $BBTMP/ITC_CLARiiON.OUT.$$
echo "============================================================================="$BBTMP/ITC_CLARiiON.OUT.$$
#---[1. Get cache
status]---------------------------------------------------------
$navicli -h $SPIP getcache > $BBTMP/$MYTMPFILE
echo "SP Cache" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /SP Write|Read Cache State/) {
sub (" *"," ")
if ($0 ~ /State Enabled/) {
sub (" State Enabled","")
sub ("^","\\&green ")
} else {
sub (" State .*","")
sub ("^","\\&red ")
}
if ($0 !~ /SP Read Cache/) {
print
}
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[2. Port status]--------------------------------------------------------------
$navicli -h $SPIP2 port -list > $BBTMP/$MYTMPFILE
echo -e "\nSP Link Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /Information about each SPPORT:/) {
FLAG=1
}
if (FLAG == 1) {
if (($0 ~ /SP Name/) || ($0 ~ /SP Port ID/) || ($0 ~ /Link
Status/) || ($0 ~ /Port Status/)) {
sub (" *","")
if ($0 ~ /SP Name/) {
sub ("SP Name:","")
SP=$0
}
if ($0 ~ /SP Port ID/) {
sub ("SP Port ID:","Port ")
Port=$0
}
if ($0 ~ /Link Status/) {
if ($0 ~ /Status:Up/) {
sub ("Status:Up","\\&green")
} else {
if ((Port == "Port 3") || (Port == "Port 2" )) {
sub ("Status:.*","\\&clear")
} else {
sub ("Status:.*","\\&red")
}
}
LinkS=$0
}
if ($0 ~ /Port Status/) {
if ($0 ~ /Status:Online/) {
sub ("Status:Online","\\&green")
} else {
if ((Port == "Port 3") || (Port == "Port 2" )) {
sub ("Status:.*","\\&clear")
} else {
sub ("Status:.*","\\&red")
}
}
sub ("Port","Status")
PortS=$0
sub ("Status:","",PortS)
sub ("Status:","",LinkS)
print SP,Port,PortS,LinkS
}
}
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[3. DPE/DAE
Status]-----------------------------------------------------------
$navicli -h $SPIP getcrus > $BBTMP/$MYTMPFILE
echo -e "\nDPE/DAE Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if (($0 ~ /[DPE|DAE] Bus . Enclosure ./) || ($0 ~ /State/)) {
if ($0 ~ /State/) {
sub ("Bus . Enclosure . ","")
sub (" *"," ")
sub ("Power","Power Supply")
if (($0 ~ /State: Present/) || ($0 ~ /State: Valid/)) {
sub (" State:*","")
sub ("^","\\&green ")
}
else {
sub (" State:.*","")
sub ("^","\\&red ")
}
}
if ($0 ~ /[DPE|DAE] Bus . Enclosure ./) {
print ""
}
print
if ($0 ~ /[DPE|DAE] Bus . Enclosure ./) {
print "----------------------------"
}
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[4. Disks status]-------------------------------------------------------------
$navicli -h $SPIP2 getdisk -state -rb -bind > $BBTMP/$MYTMPFILE
echo -e "\nDisks Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK ' BEGIN { FLAG=0 }
{
if (FLAG == 3) {
FLAG=0
sub (" *","")
sub ("Prct Bound: *","")
while (sub ("[0123456789]+: +100 *",""))
sub (" +$","%")
bound=$0
if ((hotspare ~ /Enabled/) || (hotspare ~ /Ready/) || (hotspare ~
/Unbound/) || (hotspare ~ /Empty/)) {
print status,"Disk",disk,hotspare
}
else {
if (hotspare ~ /Binding/) {
status="&green"
print status,"Disk",disk,hotspare,"LUN",bound
}
else {
status="&yellow"
print status,"Disk",disk,hotspare,"LUN",rebuild
# print status,"Disk",disk," Hostspare=",hotspare,"LUN","
Rebuild=",rebuild
}
}
}
if (FLAG == 2) {
FLAG=3
sub (" *","")
sub ("Prct Rebuilt: *","")
while (sub ("[0123456789]+: +100 +",""))
rebuild=$0
}
if (FLAG == 1) {
sub (" *","")
sub ("State: *","")
status=$0
FLAG=2
hotspare=""
if ($0 ~ /Hot Spare/) {
sub ("Hot Spare ","",status)
hotspare="(Hot Spare)"
}
if (status ~ /Empty/) {
hotspare=$status
status="&clear"
FLAG=3
}
else {
if ((status ~ /Enabled/) || (status ~ /Ready/) || (status ~
/Unbound/) || (status ~ /Binding/) || (status ~ /Expanding/)) {
hotspare=$status
status="&green"
}
else {
if ((status ~ /Copying/) || (status ~ /Equalizing/)) {
hotspare=$status
status="&yellow"
}
else {
hotspare=$status
status="&red"
}
}
}
}
if (($0 ~ /Bus +[0-9]+ +Enclosure +[0-9]+ +Disk +[0-9]+/)) {
sub ("Bus +","")
sub (" +Enclosure +","_")
sub (" +Disk +","_")
disk=$0
FLAG=1
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[5. Trespass
status]-------------------------------------------------------------
$navicli -h $SPIP getlun -ismetalun -trespass -status > $BBTMP/$MYTMPFILE
echo -e "\nTrespass Status" >> $BBTMP/ITC_CLARiiON.OUT.$$
echo "----------------------------" >> $BBTMP/ITC_CLARiiON.OUT.$$
$CAT $BBTMP/$MYTMPFILE | $GAWK '
{
if ($0 ~ /LOGICAL UNIT NUMBER/) {
sub ("LOGICAL UNIT NUMBER ","")
lun=$0
# print "lun=",lun
}
else {
if ($0 ~ /Default Owner/) {
sub ("Default Owner: ","")
preffered_sp=$0
# print "preferred sp="preffered_sp
}
else {
if ($0 ~ /Current owner/) {
sub ("Current owner: ","")
current_sp=$0
# print "current_sp=",current_sp
status="&yellow"
if ( length(lun) < 4) {
print status " Lun " lun " -->\t Default
Owner:",preffered_sp," Current Owner:",current_sp
# print status " Lun"
# printf "%4s", lun
# print " -->\t Default Owner:",preffered_sp," Current Owner:",current_sp
}
}
}
}
}' >> $BBTMP/ITC_CLARiiON.OUT.$$
#---[Check global color output]---
$CAT $BBTMP/ITC_CLARiiON.OUT.$$ | grep \&red > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=red
else
$CAT $BBTMP/ITC_CLARiiON.OUT.$$ | grep \&yellow > /dev/null 2>&1
ret=$?
if [ "$ret" = "0" ]; then
COLOR=yellow
else
COLOR=green
fi
fi
#---[Generate information to send]---
LINE="status $EMC_ARRAY.$TEST $COLOR `date`
`cat $BBTMP/ITC_CLARiiON.OUT.$$`"
#if [ "$COLOR" != "red" ]; then
$RM -f $BBTMP/ITC_CLARiiON.OUT.$$ $BBTMP/$MYTMPFILE
#fi
#---[Send page info to BBDISPLAY]---
$BB $BBDISP "$LINE
$0 running on `hostname`"
#echo $BB $BBDISP "$LINE"
On Mon, Sep 17, 2012 at 11:37 PM, Vernon Everett
<user-b3f8dacb72c8@xymon.invalid> wrote:
Hi all
Has anybody done any work on monitoring an EMC Clariion system, that they are prepared to share?
I have no idea what I need to monitor yet, and we have nothing in place at the moment, so anything is better than what I have now.
All assistance appreciated.
Regards
Vernon
--
"Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton