Hi there !
Thanks for yor replys I checked the umask and permissions after doing a gmake install
There was some binarys that were owned by root but the umask was OK so the xymon user had permission to execute them anyway …
So that was not the problem …
I am still struggling …
Question what does this mean ?? :
2012-08-16 12:26:49 Peer not up, flushing message queue
2012-08-16 12:26:50 Peer not up, flushing message queue
2012-08-16 12:26:57 Peer not up, flushing message queue
2012-08-16 12:26:58 Peer not up, flushing message queue
I get this in:
alert.log
clientdata.log
history.log
hostdata.log
rrd-status.log
And this ?
root at hpivm006:/var/log/xymon # cat xymongen.log
2012-08-16 12:28:06 Whoops ! Failed to send message (timeout)
2012-08-16 12:28:06 ->
2012-08-16 12:28:06 -> Recipient '10.240.42.21', timeout 15
2012-08-16 12:28:06 -> 1st line: 'xymondboard fields=hostname,testname,color,flags,lastchange,logtime,validtime,acktime,disabletime,sender,cookie,line1,acklist'
2012-08-16 12:28:06 xymond status-board not available, code 7
2012-08-16 12:28:06 Failed to load current Xymon status, aborting page-update
And finally this: fron xymond.log
2012-08-16 12:26:42 Setup complete
2012-08-16 12:26:59 Oversize data/client msg from 10.240.49.105 truncated (n=7120225, limit 5242880)
First line: s0004225.ecdomain.net|bbwin|win32|
2012-08-16 12:27:12 Oversize data/client msg from 10.240.49.104 truncated (n=9149877, limit 5242880)
First line: s0004226.ecdomain.net|bbwin|win32|
2012-08-16 12:32:14 Oversize data/client msg from 10.240.49.105 truncated (n=7120109, limit 5242880)
First line: s0004225.ecdomain.net|bbwin|win32|
2012-08-16 12:32:28 Oversize data/client msg from 10.240.49.104 truncated (n=8922369, limit 5242880)
First line: s0004226.ecdomain.net|bbwin|win32|
2012-08-16 12:32:41 BOARDBUSY locked at 1, GETNCNT is 0, GETPID is 27803, 0 clients
Best Regards,
/Tomas Andersson
Unix System Admin/Tech/Dev
SCA IT Services
Tel. +46 31 7460313
Mob. +46 703 610313
From: Root, Paul [mailto:user-76fdb6883669@xymon.invalid]
Sent: den 15 augusti 2012 14:47
To: Andersson Tomas; Steven Carr; xymon at xymon.com
Subject: RE: [Xymon] Solaris Xymon WWW index file missing
The “Cannot open directory /opt/xymon/server/etc/tasks.d” message is that that directory doesn’t exist.
If you created that directory, you could put files in it to start tasks, instead of adding those tasks to the /opt/xymon/server/etc/tasks.cfg file. It’s just like the /etc /httpd/conf.d directory or /etc/xinetd.d directory.
I think the other email may be on the right track about permissions being wrong.
Paul Root - Senior Engineer
Managed Services Systems - CenturyLink
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com]<mailto:[mailto:xymon-bounces at xymon.com]> On Behalf Of Andersson Tomas
Sent: Wednesday, August 15, 2012 2:40 AM
To: Steven Carr; xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] Solaris Xymon WWW index file missing
Hi,
First thanks for replying …
I cannot see anything in the xymond.log when trying to start the xymon 4.3.10
But I see some strange stuff in:
Xymonlaunch.log:
When trying to start xymon 4.3.10
2012-08-13 14:06:15 xymonlaunch starting
2012-08-13 14:06:15 Loading tasklist configuration from /opt/xymon/server/etc/tasks.cfg
2012-08-13 14:06:15 Cannot open directory /opt/xymon/server/etc/tasks.d <------------------What is this ??? there is no such file or directory …
2012-08-13 14:06:15 Loading hostnames
2012-08-13 14:06:15 Loading saved state
2012-08-13 14:06:22 Setting up network listener on 0.0.0.0:1984
2012-08-13 14:06:22 Setting up signal handlers
2012-08-13 14:06:22 Setting up xymond channels
2012-08-13 14:06:22 Setting up logfiles
Errors in xymongen.log
2012-08-13 14:06:20 Whoops ! Failed to send message (Connection failed)
2012-08-13 14:06:20 -> connect to Xymon daemon at 10.240.42.21:1984<mailto:daemon at 10.240.42.21:1984> failed (Connection refused)
2012-08-13 14:06:20 -> Recipient '10.240.42.21', timeout 15
2012-08-13 14:06:20 -> 1st line: 'xymondboard fields=hostname,testname,color,flags,lastchange,logtime,validtime,acktime,disabletime
,sender,cookie,line1,acklist'
2012-08-13 14:06:20 xymond status-board not available, code 5
2012-08-13 14:06:20 Failed to load current Xymon status, aborting page-update
Errors in alert.log:
2012-08-13 14:03:34 Terminated by signal 15
2012-08-13 14:06:20 Could not get shm of size 5242880: No such file or directory
2012-08-13 14:06:20 Channel not available
2012-08-13 14:06:26 Peer not up, flushing message queue
2012-08-13 14:06:29 Peer not up, flushing message queue
2012-08-13 14:06:29 Peer not up, flushing message queue
2012-08-13 14:06:35 Peer not up, flushing message queue
2012-08-13 14:06:35 Peer not up, flushing message queue
Errors in hostdata.log:
2012-08-13 14:06:20 Could not get shm of size 5242880: No such file or directory
2012-08-13 14:06:20 Channel not available
2012-08-13 14:16:18 Peer not up, flushing message queue
2012-08-14 10:33:32 Peer not up, flushing message queue
Seems like the xymond does not start !
Best Regards,
/Tomas Andersson
Unix System Admin/Tech/Dev
SCA IT Services
Tel. +46 31 7460313
Mob. +46 703 610313
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com] On Behalf Of Steven Carr
Sent: den 14 augusti 2012 19:32
To: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] Solaris Xymon WWW index file missing
You said the webpage doesn't work, not that the actual Xymon processes are not starting.
Have you looked in the Xymon log files to work out why Xymon isn't starting up?
Steve
On 14 August 2012 09:20, Andersson Tomas <user-5d358a4bb52c@xymon.invalid<mailto:user-5d358a4bb52c@xymon.invalid>> wrote:
Hi Nick !
Ehh I am sorry I don't understand your question but yes it is a standalone machine. Virtual machine running on HPVM a64hpIntegrityBL860ci2 hardware.
The server environment is: HP-UX B.11.31 ia64 2 CPU's and 5 GB memory assigned.
Xymon 4.3.7 server and also client running (obviously) currently.
This was compiled on in the machine's environment and apart from an error that was specific for HP-UX and fixed using the method below.
#ERRORS compiling xymon =< 4.3.7
#FIX:
#On 03/07/2011 02:19 AM, Anton Burkhalter wrote:
#> Replace CLOCK_MONOTONIC with CLOCK_REALTIME in:
#> timefunc.c
#> test-clockgettime-librt.c
Otherwize all worked OK and installed beautifully.
But when I tried the newer versions xymon 4.3.8 and xymon 4.3.10
They both configured and compiled OK but when installed they did not run ... as I mentioned in the start of this post.
Best Regards,
/Tomas Andersson
Unix System Admin/Tech/Dev
SCA IT Services
Tel. +46 31 7460313
Mob. +46 703 610313
-----Original Message-----
From: xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com> [mailto:xymon-bounces at xymon.com<mailto:xymon-bounces at xymon.com>] On Behalf Of Nick Pettefar
Sent: den 13 augusti 2012 17:21
To: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] Solaris Xymon WWW index file missing
This is a standalone machine, both server and client I guess. Is there a different set-up required for that?
Regards,
Nick
On 13 August 2012 11:00, <xymon-request at xymon.com<mailto:xymon-request at xymon.com>> wrote:
Send Xymon mailing list submissions to
xymon at xymon.com<mailto:xymon at xymon.com>
To subscribe or unsubscribe via the World Wide Web, visit
or, via email, send a message with subject or body 'help' to
xymon-request at xymon.com<mailto:xymon-request at xymon.com>
You can reach the person managing the list at
xymon-owner at xymon.com<mailto:xymon-owner at xymon.com>
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Xymon digest..."
Today's Topics:
1. Re: Solaris Xymon WWW index file missing (Jeremy Laidman)
Message: 1
Date: Mon, 13 Aug 2012 12:49:55 +1000
From: Jeremy Laidman <user-71895fb2e44c@xymon.invalid<mailto:user-71895fb2e44c@xymon.invalid>>
To: Henrik St?rner <user-ce4a2c883f75@xymon.invalid<mailto:user-ce4a2c883f75@xymon.invalid>>
Cc: xymon at xymon.com<mailto:xymon at xymon.com>
Subject: Re: [Xymon] Solaris Xymon WWW index file missing
Message-ID:
<CAAnki7DnjK7_BsM=-user-7f7f789b17b2@xymon.invalid<mailto:user-7f7f789b17b2@xymon.invalid>>
Content-Type: text/plain; charset="iso-8859-1"
On 11 August 2012 01:32, Henrik St?rner <user-ce4a2c883f75@xymon.invalid<mailto:user-ce4a2c883f75@xymon.invalid>> wrote:
On 10-08-2012 17:30, Nick Pettefar wrote:
There is no index.html or
any other plain file in the /export/home/xymon/server/www/
directory, should there be?
They are generated when xymongen runs, once it has some data. Should
show up a few minutes after you start Xymon.
This bit me once also.
It might be a FAQ, but perhaps it would be helpful to have "make install"
and package post-install scripts create initial files (if none exist),
that say "Data coming soon..." or similar. I see no down-side to this.
J