Hi Roland
Started over completely.
Used your pkgutil list, and it installed a few packages, mostly around the
freetype and libart section.
I then did a gmake clean, remover the Makefile and ran configure from
scratch.
It generated a Makefile. Then I ran gmake.
Hit the c-ares issue.
Added the -L path, and mentioned above, and we were off again.
Then I hit the rrdtool error.
Moved the /usr/ccs/bin/ld as mentioned, and we moved ahead again.
Then I hit this one..
gcc -g -O2 -Wall -Wno-unused -Wno-pointer-sign -D_REENTRANT
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DSunOS
-I/var/tmp/xymon-4.3.17/include -I/opt/csw/include -I/opt/csw/include
-DRRDTOOL12 -I/opt/csw/include -c -o perfdata.o perfdata.c
In file included from perfdata.c:20:0:
/opt/csw/lib/gcc/i386-pc-solaris2.10/4.9.0/include-fixed/math.h:333:27:
fatal error: floatingpoint.h: No such file or directory
#include <floatingpoint.h>
^
compilation terminated.
Makefile:130: recipe for target 'perfdata.o' failed
gmake[1]: *** [perfdata.o] Error 1
gmake[1]: Leaving directory '/var/tmp/xymon-4.3.17/web'
build/Makefile.rules:111: recipe for target 'web-build' failed
gmake: *** [web-build] Error 2
On 28 November 2014 at 10:29, Roland Soderstrom <
user-0cec9512a49f@xymon.invalid> wrote:
I think you miss a dependency.
Use my CSW list.
After finding which one you obviously need to redo configure so all
Makefiles are corrected.
- Roland
*From:* Vernon Everett [mailto:user-b3f8dacb72c8@xymon.invalid]
*Sent:* Friday, 28 November 2014 1:24 PM
*To:* Roland Soderstrom
*Cc:* Xymon mailinglist
*Subject:* Re: [Xymon] Building a new server - part 2
Hi Roland
Thanks for the quick response.
I have built Xymon on Solaris many times too, and agree, it should just
work.
I did find something interesting just a minute ago.
Looking through the Makefile, to check what it's looking for, and notices
something odd about the c-ares definitions. See below.
Notice the CARESLIBS has no directory defined after the -L
I changed that to CARESLIBS = -L/opt/csw/lib -lcares
And we moved on.
Only to hit another one.
gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -DSunOS -I/var/tmp/xymon-4.3.17/include
-I/opt/csw/include -I/opt/csw/include -I/opt/csw/include -DRRDTOOL12 -c -o
do_rrd.o do_rrd.c
gcc -o xymond_rrd xymond_rrd.o xymond_worker.o do_rrd.o
client_config.o ../lib/libxymontime.a -lrt ../lib/libxymoncomm.a
-L/usr/sfw/lib -lssl -lcrypto -lresolv -lsocket -lnsl -lrt -L/opt/csw/lib
-lrrd -L/opt/csw/lib -lpcre
Undefined first referenced
symbol in file
XRenderCreateLinearGradient /opt/csw/lib/libcairo.so.2
XRenderCreateRadialGradient /opt/csw/lib/libcairo.so.2
XRenderCreateSolidFill /opt/csw/lib/libcairo.so.2
ld: fatal: Symbol referencing errors. No output written to xymond_rrd
collect2: ld returned 1 exit status
Makefile:62: recipe for target 'xymond_rrd' failed
gmake[1]: *** [xymond_rrd] Error 1
gmake[1]: Leaving directory '/var/tmp/xymon-4.3.17/xymond'
build/Makefile.rules:108: recipe for target 'xymond-build' failed
gmake: *** [xymond-build] Error 2
My next Xymon install will be on Linux!
No exceptions!
--- snip ---
# C-ARES settings
SYSTEMCARES = yes
CARESINCDIR = -I/opt/csw/include
*CARESLIBS = -L -lcares*
RPATHVAL +=
# PCRE settings
PCREINCDIR = -I/opt/csw/include
PCRELIBS = -L/opt/csw/lib -lpcre
RPATHVAL += /opt/csw/lib
# RRDtool settings
RRDDEF = -DRRDTOOL12
RRDINCDIR = -I/opt/csw/include
RRDLIBS = -L/opt/csw/lib -lrrd
RPATHVAL += /opt/csw/lib
DORRD = yes
#
# OpenSSL settings
SSLFLAGS = -DHAVE_OPENSSL -DHAVE_SSLV2_SUPPORT
SSLINCDIR = -I/opt/csw/include
SSLLIBS = -L/usr/sfw/lib -lssl -lcrypto
RPATHVAL += /usr/sfw/lib
DOSSL = yes
--- snip ---
On 28 November 2014 at 10:07, Roland Soderstrom <
user-0cec9512a49f@xymon.invalid> wrote:
I’ve compiled 4.3.17 on Solaris Sparc and x86 with OpenCSW, so it should
work.
This is roughly what I do.
pkgutil -y -i coreutils
pkgutil -y -i gzip
pkgutil -y -i wget
pkgutil -y -a berkeleydb48
pkgutil -y -i freetype
pkgutil -y -i libart
pkgutil -y -i libpng15_15
pkgutil -y -i libtool
pkgutil -i -y gcc4core gcc4g++ gmake
pkgutil -i -y pcre libpcre_dev
pkgutil -i -y rrdtool rrdtool_dev
pkgutil -i -y openssl libssl_dev
pkgutil -i -y openldap_client openldap_dev
pkgutil -i -y fping
export PATH=/usr/bin:/usr/sbin:/opt/csw/bin:/opt/csw/sbin:/usr/ccs/bin
Make SURE /usr/local/<something> or /usr/sfw/<something> is not in any
path.
export LD_LIBRARY_PATH=””
crle
which gmake
/opt/csw/bin/gmake
which ld
/usr/ccs/bin/ld
MAKE=gmake ; /configure
gmake
- Roland
*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Vernon
Everett
*Sent:* Friday, 28 November 2014 12:18 PM
*To:* Xymon mailinglist
*Subject:* [Xymon] Building a new server - part 2
OK, I was correct about the library packages.
Once I installed them, it resolved most of my problems, and the configure
script completed OK.
On to the make. (Or gmake in my case)
And we hit the next hurdle.
gcc -g -O2 -Wall -Wno-unused -D_REENTRANT -D_LARGEFILE_SOURCE
-D_FILE_OFFSET_BITS=64 -DSunOS -I/var/tmp/xymon-4.3.17/include
-I/opt/csw/include -o xymonnet xymonnet.o contest.o httptest.o
httpresult.o ldaptest.o dns.o dns2.o httpcookies.o -L -lcares
-L/opt/csw/lib -lldap -llber ../lib/libxymontime.a -lrt
../lib/libxymoncomm.a -L/usr/sfw/lib -lssl -lcrypto -lresolv -lsocket
-lnsl -lrt ../lib/libxymon.a -L/opt/csw/lib -lpcre
Undefined first referenced
symbol in file
ares_process dns.o
ares_gethostbyname dns.o
ares_strerror dns.o
ares_init_options dns.o
ares_search dns.o
ares_fds dns.o
ares_destroy dns.o
ares_timeout dns.o
ares_expand_name dns2.o
ld: fatal: Symbol referencing errors. No output written to xymonnet
collect2: ld returned 1 exit status
Makefile:33: recipe for target 'xymonnet' failed
gmake[1]: *** [xymonnet] Error 1
gmake[1]: Leaving directory '/var/tmp/xymon-4.3.17/xymonnet'
build/Makefile.rules:102: recipe for target 'xymonnet-build' failed
gmake: *** [xymonnet-build] Error 2
Any ideas?
Regards
Vernon
--
"Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton
--
"Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton
--
"Accept the challenges so that you can feel the exhilaration of victory"
- General George Patton