python variables in Xymon

José

I would expect more output in your log.  Are you showing all of the
logfile?  For instance, in debug mode, the script sends the status message
contents to standard output (which goes to the logfile), and then sends the
bb command-line along with (again) the status message contents to standard
output.  So I would expect to see everything twice, but with some extra
information the second time.

What output to do get if you run the script manually using bbcmd or
hobbitcmd to set the environment, such as:

$ /usr/lib/hobbit/client/bin/bbcmd /usr/lib/hobbit/client/ext/iface.py
--debug

This is not relevant to your problem, but I thought I'd mention it.  The
errors about "invalid argument" is because ethtool cannot provide results
for "sit0" so you might want to add that interface to BLACKLIST.

Cheers
Jeremy


On 25 August 2015 at 08:45, Alvarez Aguilar José Trinidad <user-8d67eaf69650@xymon.invalid

wrote:

That's right, the original script variables iface.py Xymon are these:


  os.environ _cmd_line = ['BB'] + "" + os.environ ['BBDISP'] + "\" status
"+ os.environ ['MACHINE'] +." interface "+" "+ COLOR +" "+ TIME + pStatus
+ '"'


but only generates output information to the log file defined in the file:
clientlaunch.cfg


[interfaces]

         ENVFILE $ HOBBITCLIENTHOME / etc / hobbitclient.cfg

         CMD $ HOBBITCLIENTHOME / ext / iface.py --debug

         LOGFILE $ HOBBITCLIENTHOME / logs / interfaces.log

         INTERVAL 5m


$ *more interfaces.log*

Cannot get device settings: Invalid argument

Cannot get wake-on-lan settings: Invalid argument

Cannot get message level: Invalid argument

Cannot get link status: Invalid argument


<H3>&green Interface: sit0</H3>        IP:  None


<H3>&green Interface: eth0</H3>        IP:  10.104.11.131

&green      Link detected: yes

        Configured speed:100

        Duplex: Full

        Supported link modes:   10baseT/Half 10baseT/Full

                                100baseT/Half 100baseT/Full

                                1000baseT/Half 1000baseT/Full


        Highest link mode:1000 Full

&yellow      Higher link mode possible for this interface


<H3>&green Interface: lo</H3>        IP:  127.0.0.1

&green      Link detected: yes


Regards.


*José Trinidad Álvarez Aguilar*

*Av. Epigmenio Gonzalez No. 2, Col. Parques Industriales, C:P.76150*

*Santiago de Querétaro, Qro.*

*Tel. 101-82-36*


[image: cid:user-2c809a80e026@xymon.invalid3C270]


*De:* Jeremy Laidman [mailto:user-71895fb2e44c@xymon.invalid]
*Enviado el:* Lunes, 24 de Agosto de 2015 05:29 p.m.
*Para:* Alvarez Aguilar José Trinidad
*CC:* xymon at xymon.com
*Asunto:* Re: [Xymon] python variables in Xymon


On 24 August 2015 at 11:59, Alvarez Aguilar José Trinidad <
user-8d67eaf69650@xymon.invalid> wrote:


     os.environ command = ['BB'] + "" + os.environ ['BBDISP'] + "\" status
"+ os.environ ['MACHINE'] +." interface "+" "+ COLOR +" "+ TIME + pStatus +
'"'


This is not the same as in the script you posted.  You have /os.environ
command = ['BB']/ instead of /command = os.environ['BB']/ and you have /+."
interface "/ instead of /+".interface"/.  Could this be why it doesn't work?


Generates output information but only in the log file defined in the
configuration file: clientlaunch.cfg


Can you show the output from the logfile?


Have you tried running the script with "--debug"?


Cheers

Jeremy

*Infinitum, la mejor conexión.*


CONFIDENTIALITY NOTICE:

This e-mail message including attachments, if any, is intended only for
the person or entity to which it is addressed and may contain confidential
and /or privileged material. Any review, use, disclosure or distribution of
such confidential information without the written authorization of
Teléfonos de México is prohibited. If you are not the intended recipient,
please contact the sender by reply e-mail and destroy all copies of the
original message. By receiving this e-mail you acknowledge that any breach
by you and/or your representatives of the above provisions may entitle
Teléfonos de México to seek for damages.


AVISO DE CONFIDENCIALIDAD:

Este correo electrónico, incluyendo en su caso, los archivos adjuntos al
mismo, pueden contener información de carácter confidencial y/o
privilegiada, y se envían a la atención única y exclusivamente de la
persona y/o entidad a quien va dirigido. La copia, revisión, uso,
revelación y/o distribución de dicha información confidencial sin la
autorización por escrito de Teléfonos de México está prohibida. Si usted no
es el destinatario a quien se dirige el presente correo, favor de contactar
al remitente respondiendo al presente correo y eliminar el correo original
incluyendo sus archivos, así como cualesquiera copia del mismo. Mediante la
recepción del presente correo usted reconoce y acepta que en caso de
incumplimiento de su parte y/o de sus representantes a los términos antes
mencionados, Teléfonos de México tendrá derecho a los daños y perjuicios
que esto le cause.

17:46:00 08/24/15