Hi J
I do have the IP of the Xymon server in xymonclient.cfg on the hosts which has the client installed. I have checked from the client if the port, 1984 is open and it is.
zeratul etc # telnet 89.22.97.130 1984
Trying 89.22.97.130...
Connected to 89.22.97.130.
Escape character is '^]'.
quit
Unfortunatelly there isn't anything more the the "conn" "info" and "trends" on Xymon server display.
I can't see anything relevant in the xymond logs.
On the hosts which I have the client installed I have this:
zeratul client # ps aufx |grep xymon
root 10279 0.0 0.0 4452 756 pts/1 S+ 12:32 0:00 | | | \_ grep --colour=auto xymon
root 10115 0.0 0.0 2048 512 ? S 12:30 0:00 sh -c vmstat 300 2 1>./tmp/xymon_vmstat.zeratul.10083 2>&1; mv ./tmp/xymon_vmstat.zeratul.10083 ./tmp/xymon_vmstat.zeratul
root 10226 0.0 0.0 2028 504 ? Ss 12:31 0:00 ./bin/xymonlaunch --config=./etc/clientlaunch.cfg --log=./logs/clientlaunch.log --pidfile=./logs/clientlaunch.zeratul.pid
root 10263 0.0 0.0 2048 508 ? S 12:31 0:00 sh -c vmstat 300 2 1>./tmp/xymon_vmstat.zeratul.10231 2>&1; mv ./tmp/xymon_vmstat.zeratul.10231 ./tmp/xymon_vmstat.zeratul
On 01/07/2013 05:11 AM, Jeremy Laidman wrote:
The only configuration required on the Xymon client is the IP address of the Xymon server. Typically, this is configured in the file xymonclient.cfg, where you can set XYMSRV to the correct IP address.
Then you start the client running, perhaps by an init script. The master Xymon client process is xymonlaunch. If this isn't running, then you won't get any local details (cpu, memory, etc).
There are logfiles (on my system, in /var/log/xymon/) that might help identify any problems.
J
On 7 January 2013 06:32, Ciprian Parfon <user-429c6153ee89@xymon.invalid <mailto:user-429c6153ee89@xymon.invalid>> wrote:
Hello
I have just installed a fresh xymon server with the latest xymon
version. I have also managed to install the client on some
external host. Both are running fine and the monitoring page is
showing correctly. However I haven't managed to find how can I
configure multiple checks on the client side, as for the single
host I have added all I have is "conn", "info" and "trends"
columns. On the host which is running the xymon client I have the
following files which you can see below:
zeratul etc # pwd
/home/xymon/client/etc
zeratul etc # ls -la
total 40
drwxr-xr-x 2 xymon root 4096 2013-01-06 19:31 .
drwxr-xr-x 8 xymon root 4096 2013-01-06 16:58 ..
-rw-r--r-- 1 xymon root 975 2013-01-06 16:58 clientlaunch.cfg
-rw-r--r-- 1 xymon root 20959 2013-01-06 16:58 localclient.cfg
-rw-r--r-- 1 xymon root 1850 2013-01-06 16:58 xymonclient.cfg
I would like to enable at least cpu, load, memory, disk etc ...
Where can I make this available?
--
Ciprian Parfon
System & Network Engineer
+40 721879113
user-429c6153ee89@xymon.invalid