LDAP monitoring nonstandard port

Thanks for the suggestion on the protocols.  Tested by changing the port
and got it working.  So now I'm trying to figure out my configure and
Makefile and the configure file finds the OpenLDAP library:

Checking for LDAP ...
Compiling with LDAP works OK
LBER library not needed
Linking with LDAP works OK

Xymonnet report below.
xymonnet version 4.3.12
SSL library : OpenSSL 1.0.0 29 Mar 2010
LDAP library: OpenLDAP 20423

So what am I missing here?  This is also checking my external LDAP that
does run on 389.


On Fri, Dec 6, 2013 at 11:57 AM, John Thurston <user-ce4d79d99bab@xymon.invalid>wrote:

On Thu, Dec 5, 2013, at 10:56, Ryan Davis wrote:

I am running ApacheDS as my internal LDAP on a non standard port.

I seem to not be able to monitor that port via Xymon. A tcpdump
of the destination server shows Xymon still attempting to monitor
port 389 even though I have told my hosts.cfg file to use the
port it is listening on.

On 12/6/2013 5:10 AM, Ryan Davis wrote:

Yes here is the complete line from my hosts.cfg

192.168.1.5   ldapserver                     #
  ldaplogin="uid=someid,ou=someou:somepass"
ldap://ldapserver:1389/dc=home,dc=lan??sub?(sn=actualuser)

I suspect that you are not actually performing the extended ldap test, but
are performing the basic test on the port defined in protocols.cfg. One way
to confirm this would be to change the definition in procols.cfg and see if
the test against 'ldapserver' is then performed on the new port.

The man page for hosts.cfg contains the following line:

This type of LDAP test requires that xymonnet(1) was built with support

for LDAP, e.g. via the OpenLDAP library.

If your xymon was not built with OpenLDAP libraries, you will have only
the basic ldap test available.

--
   Do things because you should, not just because you can.

John Thurston    XXX-XXX-XXXX
user-ce4d79d99bab@xymon.invalid
Enterprise Technology Services
Department of Administration
State of Alaska