Thomas wrote:
I am running out of ideas. This is what I have, baybe you can find
something.
Thanks
Target[mrtg.router.enet0]: 1:public at 192.168.1.1:
I've change this end of line from «/192.168.0.1:public at master:» to
«1:public at master:»...
Nothing better, still no graph in trends page.
PageTop[mrtg.router.enet0]: <H1>Traffic Analysis for 1 -- </H1>
<TABLE>
<TR><TD>System:</TD> <TD> in </TD></TR>
<TR><TD>Maintainer:</TD> <TD></TD></TR>
<TR><TD>Description:</TD><TD>enet0 </TD></TR>
<TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR>
<TR><TD>ifName:</TD> <TD></TD></TR>
<TR><TD>Max Speed:</TD> <TD>12.5 MBytes/s</TD></TR>
<TR><TD>Ip:</TD> <TD>0.0.0.0 ()</TD></TR>
</TABLE>
I ain't got this, according to Henrik doc I didn't use this.
in hobbitlaunch.cfg
[mrtg]
CMD /usr/bin/mrtg --lock-file $BBSERVERLOGS/mrtg.lock
/etc/mrtg/mrtg.cfg
LOGFILE $BBSERVERLOGS/mrtg.log
INTERVAL 5m
using standard hobbitgraphs.cfg
Same as mine...
[mrtg]
FNPATTERN mrtg.*\.([a-z0-9]+).rrd
TITLE Network Traffic (MRTG)
YAXIS Bits/second
DEF:inbytes at RRDIDX@=@RRDFN@:ds0:AVERAGE
CDEF:in at RRDIDX@=inbytes at RRDIDX@,8,*
DEF:outbytes at RRDIDX@=@RRDFN@:ds1:AVERAGE
CDEF:out at RRDIDX@=outbytes at RRDIDX@,8,*
LINE2:in at RRDIDX@#@COLOR@:@RRDPARAM@ inbound
GPRINT:in at RRDIDX@:LAST: \: %10.1lf (cur)
GPRINT:in at RRDIDX@:MAX: \: %10.1lf (max)
GPRINT:in at RRDIDX@:MIN: \: %10.1lf (min)
GPRINT:in at RRDIDX@:AVERAGE: \: %10.1lf (avg)\n
LINE2:out at RRDIDX@#@COLOR@:@RRDPARAM@ outbound
GPRINT:out at RRDIDX@:LAST: \: %10.1lf (cur)
GPRINT:out at RRDIDX@:MAX: \: %10.1lf (max)
GPRINT:out at RRDIDX@:MIN: \: %10.1lf (min)
GPRINT:out at RRDIDX@:AVERAGE: \: %10.1lf (avg)\n
Got the same...
and then my router in bb-hosts
192.168.1.1 router # DEVMON
I dont know if this helps you on the right track. What is in your mrtg
log file ?
Everything looks okay but no graph generated from hobbitgraph.sh cgi
script... I'll put logs into my hobbit virtual host and try to see
what's the problem.
Thanks for help
--
Christophe Truffier
Pack-Solutions