“In my example, when the conn test was failing on 6030 and as the conn
test was ok/up on 5030 then the correct status for 6030/conn should be
clear and not red, right?”
No. If the conn test on 5030 is OK then the conn test on 6030 should be
red if it is not pingable or green if it is. The status on 6030:conn is
only modified if 6030:conn AND 5030:conn is red.
*Scot Kreienkamp | Senior Systems Engineer | La-Z-Boy Corporate*
One La-Z-Boy Drive | Monroe, Michigan 48162 | Office: XXX-XXX-XXXX | |
Mobile: XXXXXXXXXX | Email: user-9678697f1438@xymon.invalid
*From:* Mario [mailto:user-82c7780661a4@xymon.invalid]
*Sent:* Monday, April 04, 2016 3:45 PM
*To:* Scot Kreienkamp <user-9678697f1438@xymon.invalid>
*Cc:* xymon at xymon.com
*Subject:* Re: [Xymon] Depends tag working configuration
Hello Scot,
Yes, I know the route tag and I already use it here for the upstream cases.
But my necessity here is to have a dependency between some networks tests,
for example, conn/ssh, conn/smtp, conn/http.
In my example, when the conn test was failing on 6030 and as the conn test
was ok/up on 5030 then the correct status for 6030/conn should be clear and
not red, right?
10.0.0.139 6030 # http://paq depends=(conn:5030/conn) testip
10.0.0.137 5030 # http://fara testip
I´ve made some tests and it seems that the depends tag do not works with
any conn configuration.
Does not matter the "position" on the tag, depends=(conn:5030/http),
depends=(http:5030/conn) or depends=(conn:5030/conn), any of this works.
I´ve read some old emails on the list with the same question on "depends &
conn" but without a solution.
Thanks & regards,
Mario
On Mon, Apr 4, 2016 at 4:15 PM, Scot Kreienkamp <
user-9678697f1438@xymon.invalid> wrote:
Mario,
If I’m understanding your email correctly, you changed the IP on 6030 to a
non-pingable address, correct? If so, then you are performing your test
incorrectly. The tag you posted means that 6030 depends on 5030, but to
test it you changed the IP on 6030 only. To test it with the tag you
posted, 5030 and 6030 must BOTH be non-pingable. In that scenario the conn
test on 6030 should change to clear.
Also, if you only want a connectivity test then you may be looking at the
wrong tag. Look up the route tag that goes in hosts.cfg and see if that
will give you what you want.
*From:* Mario [mailto:user-82c7780661a4@xymon.invalid]
*Sent:* Monday, April 04, 2016 3:09 PM
*To:* Scot Kreienkamp <user-9678697f1438@xymon.invalid>; xymon at xymon.com
*Subject:* Re: [Xymon] Depends tag working configuration
Hi Scot,
Thanks for your help.
I´ve used your example and the dependency worked using the http test.
So then, I´ve changed the depends tag configuration to use the conn test
and this didn't work.
First test (worked as expected!):
- Stopping apache on "6030" the result was a clear status on 6030/http as
5030/http was up.
0.0.0.0 6030 # http://paq depends=(http:5030/http) noconn
0.0.0.0 5030 # http://fara noconn
Second test (connectivity configuration on depends): This test didn´t
work.
- I´ve changed the IP from 6030 to a non pingable IP and let an
available/online IP on "5030" and the depends tag didn´t work.
10.0.0.139 6030 # http://paq depends=(conn:5030/conn) testip
10.0.0.137 5030 # http://fara testip
Do you have a dependency configuration based on connectivity test working
on your system?
Thanks & Regards,
Mario
On Mon, Mar 28, 2016 at 4:45 PM, Scot Kreienkamp <
user-9678697f1438@xymon.invalid> wrote:
Sure. Here is a working config:
0.0.0.0 6030 # http:// 6030:8090/Main/ depends=(http:5030/http)
0.0.0.0 5030 # http://5030
So I’ve defined an HTTP test on 5030 and 6030, and set the HTTP test
result on 6030 to depend on the HTTP test on 5030. In my case, 5030 is the
DB server and serves up a web page if the database is up. If the database
is down there’s no way the HTTP test will succeed on 6030, so I don’t
really care if 6030 is alerting me in that case.
If you have any more trouble it would be helpful to see your
configuration. I saw you mention ICMP earlier… keep in mind that depends
sets a test dependent on another test, so if you want ICMP you have to set
it to depend on the conn test. You can’t use ICMP in the depends. It has
to be a column name.
*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Mario
*Sent:* Monday, March 28, 2016 3:04 PM
*To:*xymon at xymon.com
*Subject:* Re: [Xymon] Depends tag working configuration
Hi,
Thanks, Scot.
Yes, that´s what I´m doing here.
The test configuration was done with only core network tests and that are
directly running on the core server and it´s not working.
Do you have this configuration working on your server? Could you share it?
Thanks & Regards,
Mario
On Mon, Mar 28, 2016 at 3:43 PM, Scot Kreienkamp <
user-9678697f1438@xymon.invalid> wrote:
The depends tag works, but only for tests done by the core network tester
itself. It will not work on any external tests.
*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Mario
*Sent:* Monday, March 28, 2016 2:41 PM
*To:*xymon at xymon.com
*Subject:* [Xymon] Depends tag working configuration
Hi All,
I´m trying to make the "depends=" hosts.cfg tag to work on Xymon version
4.3.24.
Reading some old threads here, it became not clear to me if this
configuration tag currently works or not.
Has someone here have the depends tag working?
I know I can use the route tag, but my intention it´s to use another
network protocol and not ICMP for the dependency.
Thanks & Regards,
Mario
This message is intended only for the individual or entity to which it is
addressed. It may contain privileged, confidential information which is
exempt from disclosure under applicable laws. If you are not the intended
recipient, you are strictly prohibited from disseminating or distributing
this information (other than to the intended recipient) or copying this
information. If you have received this communication in error, please
notify us immediately by e-mail or by telephone at the above number. Thank
you.