On 25 Jul 2016, at 00:00, FreeSoftwareServers <user-ca3423890b9b@xymon.invalid> wrote:
Do you know which version upwards of the XYMon-Client includes /proc/mdstat? I am using apt-get in Ubuntu Currently, but I would compile manually if I found newer features embedded that I actually use.
Going to try your alternate solution regardless, because my work uses AARCONF to check on the raid status currently and we use XYMon, so seems logical.
Regards,
John M.
From: Thomas Eckert [mailto:user-2a86d6cd6326@xymon.invalid] Sent: Friday, July 22, 2016 2:16 AM
To: FreeSoftwareServers <user-ca3423890b9b@xymon.invalid>
Subject: Re: [Xymon] Convert bb-mdstat for Variables XYMON
/proc/mdstat monitoring is included in newer Xymon clients (producing a 'raid' status).
alternatively you might want to take a look at my raid-monitor extension which provides good/bad monitoring for afraid, LSI megaraid, 3ware/LSI, Adaptec aacraid:
http://www.it-eckert.com/software/raid-monitor/ <http://www.it-eckert.com/software/raid-monitor/>;
Cheers
Thomas
On Jul 21, 2016 23:40, FreeSoftwareServers <user-ca3423890b9b@xymon.invalid <mailto:user-ca3423890b9b@xymon.invalid>> wrote:
Hello XYMon Guru’s!
I am trying to configure bb-mdstat found on https://wiki.xymonton.org/doku.php/monitors:bb-mdstat <https://wiki.xymonton.org/doku.php/monitors:bb-mdstat>; , but all the variables point to BB*** and it doesn’t work, I think all the “scripting” would work If I could just figure out how to set the variables correctly, any chance we could get this updated for XYMON Variables.?
Testing :
donut at FileServer:/usr/lib/xymon/client/ext$ ./bb-mdstat.sh
./bb-mdstat.sh: 62: [: unexpected operator
BBHOME is not set... exiting
Manually set :
BBHOME=/usr/lib/xymon/client
donut at FileServer:/usr/lib/xymon/client/ext$ ./bb-mdstat.sh
./bb-mdstat.sh: 62: [: unexpected operator
*** LOADING HOBBITCLIENT.CFG ***
./bb-mdstat.sh: 88: .: Can't open /usr/lib/xymon/client/etc/hobbitclient.cfg
Manually set :
if [ ! -d "$BBTMP" ] ; then # GET DEFINITIONS IF NEEDED
echo "*** LOADING HOBBITCLIENT.CFG ***"
. $BBHOME/etc/xymonclient.cfg # INCLUDE STANDARD DEFINITIONS
Fi
And this is where I draw a blank…
root at FileServer:/usr/lib/xymon/client/ext# ./bb-mdstat.sh
./bb-mdstat.sh: 62: [: unexpected operator
*** LOADING HOBBITCLIENT.CFG ***
./bb-mdstat.sh: 3: /usr/lib/xymon/client/etc/xymonclient.cfg: include: not found
./bb-mdstat.sh: 4: /usr/lib/xymon/client/etc/xymonclient.cfg: include: not found
./bb-mdstat.sh: 17: /usr/lib/xymon/client/etc/xymonclient.cfg: include: not found
./bb-mdstat.sh: 135: ./bb-mdstat.sh: [[: not found
./bb-mdstat.sh: 135: ./bb-mdstat.sh: raid5: not found
./bb-mdstat.sh: 177: [: :
blocks
devices:: unexpected operator
./bb-mdstat.sh: 177: [: :
blocks
devices:: unexpected operator
Xymon version 4.3.7
Usage: /usr/lib/xymon/client/bin/xymon [--debug] [--merge] [--proxy=http://ip.of.the.proxy:port/] RECIPIENT DATA
RECIPIENT: IP-address, hostname or URL
DATA: Message to send, or "-" to read from stdin
My mdadm config, regular RAID5 only one mdadm, and its md0.
root at FileServer:/usr/lib/xymon/client/ext# cat /proc/mdstat
Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10]
md0 : active raid5 sdc1[4] sdb1[0] sde1[5] sdd1[3]
14650914816 blocks super 1.2 level 5, 512k chunk, algorithm 2 [4/4] [UUUU]
unused devices: <none>