I think maybe your names don't match??
<ds>
<name> NetAtoD </name>
not equal to:
DEF:NetAtoD=ConfigPulls.rrd:AtoD:AVERAGE
.....
LINE2:AtoD#00FF00:Net A to D
.....
GPRINT:AtoD:LAST:Net A to D \: %5.1lf (cur)
I think it should be:
DEF:NetAtoD=ConfigPulls.rrd:NetAtoD:AVERAGE
....
LINE2:NetAtoD#00FF00:Net A to D
....
GPRINT:NetAtoD:LAST:Net A to D \: %5.1lf (cur)
and similarly for the other DEF, LINE2 and GPRINT. It's been a long time
since I messed with graphs too, so I could be completely wrong.
Ralph Mitchell
On Wed, Sep 4, 2019 at 1:59 PM Root, Paul T <user-76fdb6883669@xymon.invalid>
wrote:
I?ve got a new test that I need to graph. It is a simple count of devices
in multiple ?networks?. This test only runs once a day. I haven?t done
a graph in xymon in several years, and it?s always a struggle.
This is the input data:
Net_AtoD: 5871
Net_EtoN: 5589
Net_OtoZ_1to9: 5242
Other: 386
InfraGen: 12
InfraSec: 25
The data comes in fine. And I get a good rrd file (all 6 networks are in
there and look the same as this, except obviously the last_ds and value
values:
<ds>
<name> NetAtoD </name>
<type> GAUGE </type>
<minimal_heartbeat> 600 </minimal_heartbeat>
<min> NaN </min>
<max> NaN </max>
<!-- PDP Status -->
<last_ds> 5871 </last_ds>
<value> 5.8710000000e+04 </value>
<unknown_sec> 267 </unknown_sec>
</ds>
I have multiple xymon servers, and I share most of the config with an
include line in xymonserver.cfg:
/etc/xymon/xymonserver-common.cfg:TEST2RRD+=",proc-mem-cfgmgrd=ncv,ucf=ncv,ConfigPulls=ncv"
/etc/xymon/xymonserver-common.cfg:GRAPHS+=",vmwarevms,hpnasnaphost,ucf,ConfigPulls"
/etc/xymon/xymonserver-common.cfg:NCV_ConfigPulls="*:GAUGE"
I?ve restarted a few times.
I put the graph config in its own file /etc/xymon/graph.d/ConfigPulls.cfg
[ConfigPulls]
TITLE NCM Config PUlls
YAXIS Number of Devices
DEF:NetAtoD=ConfigPulls.rrd:AtoD:AVERAGE
DEF:NetEtoN=ConfigPulls.rrd:EtoN:AVERAGE
DEF:NetOtoZ=ConfigPulls.rrd:OtoZ:AVERAGE
DEF:Other=ConfigPUlls.rrd:Other:AVERAGE
DEF:InfraGen=ConfigPUlls.rrd:InfraGen:AVERAGE
DEF:InfraSec=ConfigPUlls.rrd:InfraSec:AVERAGE
LINE2:AtoD#00FF00:Net A to D
LINE2:EtoN#00CCCC:Net E to N
LINE2:OtoZ#FFCC00:Net O to Z & 1 to 9
LINE2:Government#FF0000:Government
LINE2:InfraGen#FFFF00:Infrastructure General
LINE2:InfraSec#FFFFCC:Infrastructure Secure
COMMENT:\n
GPRINT:AtoD:LAST:Net A to D \: %5.1lf (cur)
GPRINT:AtoD:MAX: \: %5.1lf (max)
GPRINT:AtoD:MIN: \: %5.1lf (min)
GPRINT:EtoN:AVERAGE: \: %5.1lf (avg)\n
GPRINT:EtoN:LAST:Net E to N \: %5.1lf (cur)
GPRINT:EtoN:MAX: \: %5.1lf (max)
GPRINT:EtoN:MIN: \: %5.1lf (min)
GPRINT:EtoN:AVERAGE: \: %5.1lf (avg)\n
GPRINT:OtoZ:LAST:Net 0 to Z \: %5.1lf (cur)
GPRINT:OtoZ:MAX: \: %5.1lf (max)
GPRINT:OtoZ:MIN: \: %5.1lf (min)
GPRINT:OtoZ:AVERAGE: \: %5.1lf (avg)\n
GPRINT:Government:LAST:Government \: %5.1lf (cur)
GPRINT:Government:MAX: \: %5.1lf (max)
GPRINT:Government:MIN: \: %5.1lf (min)
GPRINT:Government:AVERAGE: \: %5.1lf (avg)\n
GPRINT:InfraGen:LAST:Infrastructure General \: %5.1lf (cur)
GPRINT:InfraGen:MAX: \: %5.1lf (max)
GPRINT:InfraGen:MIN: \: %5.1lf (min)
GPRINT:InfraGen:AVERAGE: \: %5.1lf (avg)\n
GPRINT:InfraSec:LAST:Infrastructure Secure \: %5.1lf (cur)
GPRINT:InfraSec:MAX: \: %5.1lf (max)
GPRINT:InfraSec:MIN: \: %5.1lf (min)
GPRINT:InfraSec:AVERAGE: \: %5.1lf (avg)\n
The graph doesn?t show up, just a broken link in both the test and trends
pages.
Any help?
Thanks,
Paul.
Paul Root
Lead Operations Engineer - IT Managed Services
XXX Commerce Dr
Woodbury, Mn 55125
XXX-XXX-XXXX user-76fdb6883669@xymon.invalid
This communication is the property of CenturyLink and may contain
confidential or privileged information. Unauthorized use of this
communication is strictly prohibited and may be unlawful. If you have
received this communication in error, please immediately notify the sender
by reply e-mail and destroy all copies of the communication and any
attachments.