# ./mytest.sh
Total:49122
Free:42732
# cat mytest.sh
#!/usr/bin/sh
FREE=`/usr/sbin/swapinfo |grep ^memory |awk {'print $4'}`
FREEREPORT=`echo $FREE / 1024 |/usr/bin/bc`
TOTAL=`/usr/sbin/swapinfo |grep ^memory |awk {'print $2'}`
TOTALREPORT=`echo $TOTAL / 1024 |/usr/bin/bc`
echo Total:$TOTALREPORT
echo Free:$FREEREPORT
# uname -r
B.11.23
# swapinfo -ta
Kb Kb Kb PCT START/ Kb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 1048576 0 1038336 0% 0 - 1
/dev/vg00/lvol2
dev 83853312 0 83852288 0% 0 - 0
/dev/vgev08_swap_r0_1/lvswap
reserve - 3775900 -3775900
memory 50301020 6543124 43757896 13%
total 135202908 10319024 124872620 8% - 0 -
# swapinfo -tam
Mb Mb Mb PCT START/ Mb
TYPE AVAIL USED FREE USED LIMIT RESERVE PRI NAME
dev 1024 0 1014 0% 0 - 1
/dev/vg00/lvol2
dev 81888 0 81887 0% 0 - 0
/dev/vgev08_swap_r0_1/lvswap
reserve - 3686 -3686
memory 49122 6390 42732 13%
total 132034 10076 121947 8% - 0 -
-----Original Message-----
From: xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] On Behalf
Of user-ce4a2c883f75@xymon.invalid
Sent: Thursday, March 03, 2011 9:00 AM
To: Jason Fredricksen
Cc: xymon at xymon.com
Subject: Re: [Xymon] hpux-meminfo.c patch
Hi Jason,
On Tue, 22 Feb 2011 08:15:14 -0600, Jason Fredricksen
<user-124cbfd9fa0b@xymon.invalid> wrote:This patch for hpux-meminfo.c may help due to 11iv3 page sizes 4096
,8192
,16384 ,65536.
I was sent another solution back in December which replaces the
hpux-meminfo
utility with a bit of shell scripting:
FREE=`/usr/sbin/swapinfo |grep ^memory |awk {'print $4'}`
FREEREPORT=`echo $FREE / 1024 |/usr/bin/bc`
TOTAL=`/usr/sbin/swapinfo |grep ^memory |awk {'print $2'}`
TOTALREPORT=`echo $TOTAL / 1024 |/usr/bin/bc`
echo Total:$TOTALREPORT
echo Free:$FREEREPORT
(the original message is
http://lists.xymon.com/archive/2010-December/030100.html
from Earl Flack)
Can you confirm if this shell script works OK for you ?
I would much rather use standard shell-tools than a custom
C program that I have difficulty supporting.
Also, anyone with access to older HP/UX versions ? I would
be most interested to hear if Earl's shell version to get
the memory info works on other HP/UX versions as well.
Regards,
Henrik