Did you see my answer about requesting the wrong directory?
Josh Luthman
Office: XXX-XXX-XXXX
Direct: XXX-XXX-XXXX
XXXX Wayne St
Suite XXXX
Troy, OH XXXXX
On Wed, Dec 11, 2013 at 2:37 PM, Root, Paul T
<user-76fdb6883669@xymon.invalid <mailto:user-76fdb6883669@xymon.invalid>> wrote:
Any error messages in apache log files?
*From:*Diep, David (OCTO-Contractor) [mailto:user-ca44d68fd6e2@xymon.invalid
<mailto:user-ca44d68fd6e2@xymon.invalid>]
*Sent:* Wednesday, December 11, 2013 1:19 PM
*To:* Root, Paul T; 'xymon at xymon.com <mailto:xymon at xymon.com>'
*Subject:* RE: 404 Not Found URL/xymon was not found on this server
Hi Paul,
I saw that thread and I did go to the config file to make sure...
XYMONSERVERROOT="/home/xymon" # Where Xymon is
installed
XYMONSERVERLOGS="/var/log/xymon" #
Directory for server logs. The xymon user must have write-access
here.
XYMONCLIENTHOME="/home/xymon/client" # XYMONHOME
directory for the client
XYMONSERVERHOSTNAME="lsypf01a.in.domain" # The hostname of
your server
XYMONSERVERIP="10.82.10.54" # The IP-address
of your server. Use the real one, not 127.0.0.1 .
XYMONSERVEROS="linux" # The operating system of
your server. linux,freebsd,solaris,hpux,aix,osf
XYMONSERVERWWWNAME="lsypf01a.in.domain" # The name used
for this hosts' webserver
XYMONSERVERWWWURL="/xymon" # The top URL for the
Xymon webpages
XYMONSERVERCGIURL="/xymon-cgi" # The URL for the Xymon
CGI scripts.
XYMONSERVERSECURECGIURL="/xymon-seccgi" # The URL for the secured
Xymon CGI scripts.
# XYMONNETWORK="foo" # The network
location, makes xymonnet test only hosts with NET:foo
# You only need to
set this if you have multiple network test servers with
# a shared
hosts.cfg file.
# Make sure the path includes the directories where you have
fping, mail and (optionally) ntpdate installed,
# as well as the XYMONHOME/bin directory where all of the Xymon
programs reside.
PATH="/bin:/usr/bin:/sbin:/usr/sbin:/usr/local/bin:/usr/local/sbin:/home/xymon/server/bin"
SHELL="/bin/sh" # Shell to use
when forking programs
# Some systems need extra settings e.g. to locate run-time
libraries.
# You can add these extra settings here:
# Default settings for "delayred" and "delayyellow" parameters in
hosts.cfg
DELAYRED="" # Format:
status:delay[,status:delay - e.g. "cpu:15,disk:30"
DELAYYELLOW="" # Format:
status:delay[,status:delay - e.g. "cpu:15,disk:30"
##### Normally you do not need to modify anything below this point
#####
# General settings
XYMONDPORT="1984" # Portnumber where xymond listens
XYMSRV="10.82.10.54" # IP of a single Xymon server
XYMSERVERS="" # IP of multiple Xymon servers. If
used, XYMSRV must be 0.0.0.0
FQDN="TRUE" # Use fully-qualified hostnames
internally. Keep it TRUE unless you know better.
I restarted xymon first and then apache... still no luck.
[xymon at lsypf01a ~]$ ./server/xymon.sh restart
Xymon stopped
Xymon started
[root at lsypf01a etc]# service httpd restart
Stopping httpd: [ OK ]
Starting httpd: [ OK ]
http://10.82.10.54 is served, but not http://10.82.10.54/xymon
D'oh.
*David Diep**|* IBM Z Series Network Architect | Office of the
Chief Technology Officer
Integrated Platform Services | 200 I Steet SE | Washington DC,
20003**
Phone: XXX.XXX.XXXX <tel:XXX.XXX.XXXX> *| *Mobile Phone:
XXX.XXX.XXXX <tel:XXX.XXX.XXXX> *| *Email:user-7c2f16abb331@xymon.invalid
<mailto:user-ca44d68fd6e2@xymon.invalid>_
Website:www.octo.dc.gov <http://www.octo.dc.gov/>; *| **Telework
day: Thursday*
*From:*Root, Paul T [mailto:user-76fdb6883669@xymon.invalid]
*Sent:* Wednesday, December 11, 2013 2:04 PM
*To:* Diep, David (OCTO-Contractor); 'xymon at xymon.com
<mailto:xymon at xymon.com>'
*Subject:* RE: 404 Not Found URL/xymon was not found on this server
We just had this one.
You see that xymon is listening on 0.0.0.0:1984
<http://0.0.0.0:1984>;. You need to change you XYMONSERVERIP
environment in xymonserver.cfg to the IP address of the server.
Also set XYMONSERVERHOSTNAME to the hostname and XZYMSRV to the ip
address as well. Then restart xymon.
I'm assuming you did restart apache after you put the
xymon-apache.conf into /etc/httpd/conf.d, right?
*From:*Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Diep,
David (OCTO-Contractor)
*Sent:* Wednesday, December 11, 2013 12:48 PM
*To:* xymon at xymon.com <mailto:xymon at xymon.com>
*Subject:* [Xymon] 404 Not Found URL/xymon was not found on this
server
Hi Everyone,
I'm very very new to XYMON, as a matter of fact, I just installed
it 15 minutes ago. I thought I was cruising along quite nicely
until I tested it. This is what I received:
*Not Found*
The requested URL /xymon was not found on this server.
/Apache/2.2.15 (Red Hat) Server at 10.82.10.54 Port 80/
Xymon is running, that I can confirm:
[xymon at lsypf01a ~]$ ./server/xymon.sh status
Xymon (xymonlaunch) running with PID 4826
[xymon at lsypf01a ~]$
Here is my xymon-apache.conf, I made changes from what I've read
in the older subscription messages:
Alias /xymon/ "/home/xymon/server/www/"
<Directory "/home/xymon/server/www">
Options Indexes FollowSymLinks Includes MultiViews
Require all granted
</Directory>
ScriptAlias /xymon-cgi/ "/home/xymon/cgi-bin/"
<Directory "/home/xymon/cgi-bin">
AllowOverride None
Options ExecCGI Includes
Require all granted
</Directory>
ScriptAlias /xymon-seccgi/ "/home/xymon/cgi-secure/"
<Directory "/home/xymon/cgi-secure">
AllowOverride None
Options ExecCGI Includes
Require all granted
Various logs in /var/log/xymon:
Xymonlaunch.log:
2013-12-11 13:24:00 xymonlaunch starting
2013-12-11 13:24:00 Loading tasklist configuration from
/home/xymon/server/etc/tasks.cfg
2013-12-11 13:24:00 Cannot open directory
/home/xymon/server/etc/tasks.d
2013-12-11 13:24:00 Loading hostnames
2013-12-11 13:24:00 Loading saved state
2013-12-11 13:24:00 Setting up network listener on 0.0.0.0:1984
<http://0.0.0.0:1984>;
2013-12-11 13:24:00 Setting up signal handlers
2013-12-11 13:24:00 Setting up xymond channels
2013-12-11 13:24:00 Setting up logfiles
Rrd-data.log:
2013-12-11 13:34:13 Peer at 0.0.0.0:0 <http://0.0.0.0:0>; failed:
Broken pipe
2013-12-11 13:34:13 Peer not up, flushing message queue
2013-12-11 13:34:13 exec() failed for child command xymond_rrd: No
such file or directory
2013-12-11 13:34:13 Child process 5357 died: Exit status 1
*David Diep*
* *
Look out for those in need this winter. When the temperature or
wind chill is 32°F or below, the District issues a Hypothermia
Alert. For assistance during an Alert, call the Shelter Hotline
<http://dhs.dc.gov/page/hypothermia-alert-plan>at *X-XXX-XXX-XXXX
<tel:X-XXX-XXX-XXXX>* or *311*.