Hi Thorsten,
I have a template I created for the Liebert Nx range of UPS's.
I can't guarantee it will work with the HiPulse but it could be a
starting point for you.
I'll look at uploading it to the SF repository.
Craig
-----Original Message-----
From: David Baldwin [mailto:user-cbbf693f2c89@xymon.invalid]
Sent: Thursday, 10 September 2009 11:53 AM
To: user-ae9b8668bcde@xymon.invalid
Subject: Re: [hobbit] UPS monitoring using devmon
user-9219fb9415b1@xymon.invalid wrote:
Hi,
sorry if this a little offtopic, but maybe someone has a devmon
template for the following UPS:
Emerson/Liebert HiPulse MM
MGE Galaxy Single
MGE Upsilon STS_100 Cross switch
MGE Upsilon STS_20 Cross switch
Thank you
Thorsten
If you are not the intended addressee, please inform us immediately
that you have received this e-mail in error, and delete it. We thank
you for your cooperation.
I have a template for the standard UPS MIB which I could send through. I
have a little more work to do on it splitting the power status into 3
tests for input, output and battery. Should give me motivation to
complete this today and I will upload to devmon SF site.
You can check if your UPS supports the standard UPS MIB or wants a
proprietary one (substituting for myups below, and your community string
if it is not "public"):
snmpwalk -v2c -cpublic myups 1.3.6.1.2.1.33.1.1
Note that some UPS devices only support SNMPv1, so try -v1 instead of
-v2c above if it doesn't work.
David.
--
David Baldwin - IT Unit
Australian Sports Commission www.ausport.gov.au
Tel 02 62147830 Fax 02 62141830 PO Box 176 Belconnen ACT 2616
user-cbbf693f2c89@xymon.invalid Leverrier Street Bruce ACT 2617
Keep up to date with what's happening in Australian sport visit
http://www.ausport.gov.au
This message is intended for the addressee named and may contain
confidential and privileged information. If you are not the intended
recipient please note that any form of distribution, copying or use of
this communication or the information in it is strictly prohibited and
may be unlawful. If you receive this message in error, please delete it
and notify the sender.
DISCLAIMER:
The information contained in this email message is confidential and for the attention of the intended recipient only.
It is not necessarily the official view or communication of the Rodney District Council.
If you are not the intended recipient you must not disclose, copy or distribute this message or the information in it.
If you have received this message in error, please delete or destroy all copies of the email and notify the sender immediately.
Rodney District Council accepts no responsibility for any effects this email message or attachments has on the recipient network or computer system.