still no luck.
Does anyone have the proper attribues for on Ubuntu 10.04 x86_64
SSLINCDIR = -I/usr/bin
SSLLIBS = -L/usr/include/openssl/ -lssl -lcrypto
RPATHVAL += /usr/include/openssl/
The above doesn't seem to do the trick.
I even tried
./configure.server --sslinclude /usr/include/openssl --ssllib /usr/lib/
both times configured , make and make install on a new xymon folder,
nothing.
GCC just shows:
SSLFLAGS="-DHAVE_OPENSSL=1" SSLINCDIR="-I/usr/include/openssl "
SSLLIBS="-L/usr/lib/ -lssl -lcrypto" LDAPFLAGS="" LDAPINCDIR="" LDAPLIBS=""
DOSNMP="no" NETLIBS="" XYMONHOME="/home/xymon/server" ARESVER="1.7.3"
RUNTIMEDEFS="" PCREINCDIR="-I/usr/include" PCRELIBS="-L/usr/lib64 -lpcre"
LIBRTDEF="-lrt" make -C xymonnet all
make[1]: Entering directory `/home/xymon-4.3.5/xymonnet'
make[1]: Nothing to be done for `all'.
as if everything is fine.
still no SSL support.
tia
On Wed, Oct 5, 2011 at 2:02 PM, Root, Paul <user-76fdb6883669@xymon.invalid>wrote:
Remove xymonnet and do a make again. ****
** **
See what the output looks like.****
Are these config lines in the gcc lines?****
** **
You might try re-doing ./configure****
** **
I compiled on CentOS, and had the similar problem of not having the
development (include files) package installed the first time. Looks like you
have that though.****
** **
** **
Paul Root - Engineer III - Qwest is now CenturyLink****
** **
*From:* Tom S [mailto:user-428671d28ab5@xymon.invalid]
*Sent:* Wednesday, October 05, 2011 12:50 PM
*To:* Root, Paul
*Subject:* Re: [Xymon] How to tell if Xymon OpenSSL is enabled?****
** **
Thanks,
I thought I complied it with SSL but it only shows the following:
/home/xymon/server/bin# ./xymonnet --version
xymonnet version 4.3.5
My Makefile (Ubuntu 10.04) has the following:
# OpenSSL settings
SSLFLAGS = -DHAVE_OPENSSL=1
SSLINCDIR = -I/usr/bin
SSLLIBS = -L/usr/include/openssl/ -lssl -lcrypto
RPATHVAL += /usr/include/openssl/
#
I did a make and make install and it gave me no errors.
I installed the following packages for Openssl :
libssl-dev
libssl0.9.8
openssl
Any ideas?
****
On Wed, Oct 5, 2011 at 10:58 AM, Root, Paul <user-76fdb6883669@xymon.invalid>
wrote:****
Oh, and it stays in the http test column, there is not a https test column.
****
****
Paul Root - Engineer III - Qwest is now CenturyLink****
****
*From:* xymon-bounces at xymon.com [mailto:xymon-bounces at xymon.com] *On
Behalf Of *Tom S
*Sent:* Wednesday, October 05, 2011 9:50 AM
*To:* xymon at xymon.com
*Subject:* [Xymon] How to tell if Xymon OpenSSL is enabled?****
****
So at first I compiled Xymon with no SSL.****
Then I re compiled it over the existing xymon (I made sure it is shutdown
first) with the following in the Makefile . the configure.server added the
below flags: (Ubuntu 10.04)
# OpenSSL settings
SSLFLAGS = -DHAVE_OPENSSL=1
SSLINCDIR = -I/usr/bin
SSLLIBS = -L/usr/include/openssl/ -lssl -lcrypto
RPATHVAL += /usr/include/openssl/
How can I tell if it was successful?
When I added the following to the hosts.cfg file;
<ip> hostname # ssh https://mydomain.com ssh-tunnel
I get the following in the xymon status page:
= https://mydomain.com/ - Connected, but got empty response =
this is in the 'http' category.
should there be an 'https' category added?
Is there a way I can surely tell that the Xymon compiled installation has
full openssl support?
TIA!****
** **
This communication is the property of CenturyLink and may contain
confidential or privileged information. Unauthorized use of this
communication is strictly
prohibited and may be unlawful. If you have received this communication
in error, please immediately notify the sender by reply e-mail and destroy
all copies of the communication and any attachments.****
** **
This communication is the property of CenturyLink and may contain
confidential or privileged information. Unauthorized use of this
communication is strictly
prohibited and may be unlawful. If you have received this communication
in error, please immediately notify the sender by reply e-mail and destroy
all copies of the communication and any attachments.