Hi Martin
Many thanks, you're right. Wrong syntax...
On a related note, I see in the PS client a [netstat] test but this
test has gone purple on th server I've changed from BBwin.
Have you seen this?
Thanks
CC
On Thu, Apr 23, 2015 at 11:54 AM, <user-a23a3b28d7cd@xymon.invalid> wrote:
Hi Colin,
Yes, I had the same problem. I believe the issue is related to the
PowerShell client not using the CLASS=Win32 in analysis.cfg. I think a
recent update to the PS client has addressed that issue, but I haven't look
into it yet.
Hence I just state the LOAD 80 90 in each PS client server in analysis.cfg.
Eg.
HOST=PRDxxxx01
LOAD 80 90
From: Colin Coe <user-5b250cd7a540@xymon.invalid>
To: "xymon at xymon.com" <xymon at xymon.com>,
Date: 23/04/2015 01:42 PM
Subject: [Xymon] Windows server loads reported high by PowerShell
client
Sent by: "Xymon" <xymon-bounces at xymon.com>
Hi all
I'm testing the new PowerShell client.
I'm seeing Windows nodes with loads of above 5% being reported as high
use such as the below.
---
Thu 23 Apr 11:32:18 2015 up: 0 days, 1 users, 63 procs, load=6.2%
Load is HIGH
CPU states:
total 6.2%
cores: 1
CPU PID Image Name Pri Time MemUsage
2.3% 1676 SVC:MSSQL$MICROSOFT##WID 8 00:04:17 101200k
0.8% 796 SVC:Appinfo/BITS/CertPropSvc/D 8 00:01:13 44244k
0.7% 748 SVC:Dhcp/EventLog/lmhosts/Wcms 8 00:00:51 16184k
0.6% 2176 WmiPrvSE 8 00:00:24 32676k
0.6% 1648 powershell 8 00:01:07 86344k
0.3% 1540 WmiPrvSE 8 00:00:24 23288k
0.2% 1768 SVC:RHEV-Agent 8 00:00:34 21496k
0.2% 1088 RMClient 8 00:00:29 191220k
0.2% 3792 ServerManager 8 00:00:13 106148k
0.1% 2952 WmiPrvSE 8 00:00:10 8656k
0.1% 504 services 9 00:00:07 7640k
0.0% 4 System 8 00:00:09 264k
0.0% 3116 SVC:gupdate 8 00:00:00 9412k
0.0% 2812 WmiPrvSE 8 00:00:00 10208k
0.0% 1388 SVC:TermService 8 00:00:04 65560k
0.0% 600 SVC:RpcEptMapper/RpcSs 8 00:00:01 6800k
0.0% 3560 WmiPrvSE 8 00:00:00 5196k
0.0% 512 SVC:KeyIso/Netlogon/SamSs 9 00:00:04 13348k
0.0% 1692 SVC:wmiApSrv 8 00:00:00 5020k
0.0% 1628 conhost 8 00:00:00 2720k
0.0% 2072 SVC:RDMS/TScPubRPC 8 00:00:00 10748k
0.0% 3308 SVC:RPCHTTPLBS 8 00:00:00 3024k
0.0% 552 SVC:BFE/DPS/MpsSvc 8 00:00:00 9892k
0.0% 3832 GoogleUpdate 4 00:00:00 2440k
0.0% 352 csrss 13 00:00:01 3732k
0.0% 3096 rdpclip 8 00:00:00 6376k
0.0% 4064 GoogleUpdate 4 00:00:00 8780k
0.0% 3720 iashost 8 00:00:00 11352k
0.0% 3776 SVC:TSGateway 8 00:00:00 13508k
0.0% 2092 SVC:Tssdis 8 00:00:00 11016k
0.0% 4068 VCDDaemon 8 00:00:00 5572k
0.0% 2800 dwm 13 00:00:01 39200k
0.0% 2688 SVC:MSDTC 8 00:00:00 6616k
0.0% 3088 taskhostex 8 00:00:00 6400k
0.0% 3292 explorer 8 00:00:07 89732k
0.0% 2324 SVC:COMSysApp 8 00:00:00 9872k
0.0% 3464 ClassicStartMenu 8 00:00:00 8028k
0.0% 2432 taskeng 6 00:00:00 4372k
0.0% 2376 SVC:PolicyAgent 8 00:00:00 4284k
0.0% 1820 vdagent 13 00:00:00 3768k
0.0% 712 dwm 13 00:00:00 29124k
0.0% 696 LogonUI 13 00:00:00 26172k
0.0% 724 SVC:vdservice 10 00:00:00 2712k
0.0% 928 SVC:CryptSvc/Dnscache/LanmanWo 8 00:00:00 16628k
0.0% 828 SVC:EventSystem/FontCache/netp 8 00:00:00 11656k
0.0% 568 SVC:BrokerInfrastructure/DcomL 8 00:00:00 10220k
0.0% 208 smss 11 00:00:00 992k
0.0% 0 Idle 0 4k
0.0% 404 csrss 13 00:00:00 3272k
0.0% 440 winlogon 13 00:00:00 5268k
0.0% 412 wininit 13 00:00:00 3496k
0.0% 1072 SVC:Spooler 8 00:00:00 10496k
0.0% 1440 SVC:WIDWriter 8 00:00:00 5492k
0.0% 1424 SVC:W3SVC/WAS 8 00:00:00 8352k
0.0% 1576 SVC:XymonPSClient 8 00:00:00 3888k
0.0% 1736 winlogon 13 00:00:00 5196k
0.0% 1732 csrss 13 00:00:00 19372k
0.0% 1368 SVC:ScDeviceEnum/SysMain/TrkWk 8 00:00:04 11180k
0.0% 1124 SVC:IISADMIN 8 00:00:00 15408k
0.0% 1100 SVC:AppHostSvc 8 00:00:00 7252k
0.0% 1164 SVC:KPSSVC 8 00:00:00 3020k
0.0% 1280 SVC:QEMU-GA 8 00:00:00 5060k
0.0% 1208 SVC:QEMU Guest Agent VSS Provi 8 00:00:00 5292k
---
I've got the following in /etc/xymon/analysis.cfg
---
CLASS=powershell
LOAD=80 90
---
and in /etc/xymon/client-local.cfg
---
[powershell]
eventlog:security
ignore success
ignore Success
ignore "The local computer may not have the necessary registry
information or message DLL files to display messages from a remote
computer"
eventlog:system
ignore "Contact the administrator to install the driver before you log in
again"
adreplicationcheck
terminalservicessessions:10:15
---
Any ideas how I can get the thresholds in the analysis file to be honored?