vmware esx vdf

The output format is split in two lines if you use /usr/sbin/vdf.
Try "/usr/sbin/vdf -P"


Dominique

Gatis A. wrote:

Hi,

Does anyone can help me to find out why hobbit server is not reacting on disk thresholds:

clients side hobbitclient-linux.sh "df" is substituted with esx "vdf" to show vmfs volumes:

$ sudo /usr/sbin/vdf | grep -vE "none|\/vmfs\/devices" | sed -e '/^[^     ][^     ]*$/{
N
s/[     ]*\n[   ]*/ /
}'
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda2              5036316   1400552   3379932  30% /
/dev/sda1               101089     26731     69139  28% /boot
/dev/sda6              2008108     92920   1813180   5% /var/log
/vmfs/volumes/45d5a1ab-a762f091-bf2e-00145ebdbc9a 104595456  94534656  10060800  90% /vmfs/volumes/esx-lun1
/vmfs/volumes/45e3e8c9-816dfb02-6c98-00145ebdbc9a 104595456  84154368  20441088  80% /vmfs/volumes/esx-lun2

disk status page should be yellow, but it's not, it's still green (threshold is set to 85%)

this is the original "df" from hobbitclient-linux.sh
df -Pl -x none -x tmpfs -x shmfs -x unknown -x iso9660 | sed -e '/^[^   ][^     ]*$/{

N
s/[     ]*\n[   ]*/ /
}'

Filesystem         1024-blocks      Used Available Capacity Mounted on
/dev/sda2              5036316   1400552   3379932      30% /
/dev/sda1               101089     26731     69139      28% /boot
/dev/sda6              2008108     92916   1813184       5% /var/log

both outputs looks similar