Hi Scott yep...
TEST2RRD="cpu=la,disk,inode,qtree,memory,$PINGCOLUMN=tcp,http=tcp,dns=tcp,dig=tcp,time=ntpstat,vmstat,iostat,netstat,temperature,apache,bind,sendmail,mailq,nmailq=mailq,socks,bea,iishealth,citrix,bbgen,bbtest,bbproxy,hobbitd,files,procs=processes,ports,clock,lines,deltalines,ops,stats,cifs,JVM,JMS,HitCache,Session,JDBCConn,ExecQueue,JTA,TblSpace,RollBack,MemReq,InvObj,snapmirr,snaplist,snapshot,if_load=devmon,temp=devmon,paging,mdc,mdchitpct,cics,dsa,getvis,maxuser,nparts,xymongen,xymonnet,xymonproxy,xymond,nginx"
The definitions are here
https://github.com/ZeWaren/xymon-nginx/blob/master/graphs.cfg
[nginx_connections]
FNPATTERN ^nginx_connections.rrd
TITLE Nginx connections
YAXIS
DEF:total at RRDIDX@=@RRDFN@:total:AVERAGE
DEF:waiting at RRDIDX@=@RRDFN@:waiting:AVERAGE
DEF:reading at RRDIDX@=@RRDFN@:reading:AVERAGE
DEF:writing at RRDIDX@=@RRDFN@:writing:AVERAGE
AREA:total at RRDIDX@#FFC3C0:Total :0
GPRINT:total at RRDIDX@:LAST: Current\: %4.0lf
GPRINT:total at RRDIDX@:AVERAGE: Average\: %4.0lf
GPRINT:total at RRDIDX@:MAX: Max\: %4.0lf \n
AREA:waiting at RRDIDX@#FF0000:Waiting :1
GPRINT:waiting at RRDIDX@:LAST: Current\: %4.0lf
GPRINT:waiting at RRDIDX@:AVERAGE: Average\: %4.0lf
GPRINT:waiting at RRDIDX@:MAX: Max\: %4.0lf \n
AREA:reading at RRDIDX@#FF7D00:Reading :1
GPRINT:reading at RRDIDX@:LAST: Current\: %4.0lf
GPRINT:reading at RRDIDX@:AVERAGE: Average\: %4.0lf
GPRINT:reading at RRDIDX@:MAX: Max\: %4.0lf \n
AREA:writing at RRDIDX@#FFF200:Writing :1
GPRINT:writing at RRDIDX@:LAST: Current\: %4.0lf
GPRINT:writing at RRDIDX@:AVERAGE: Average\: %4.0lf
GPRINT:writing at RRDIDX@:MAX: Max\: %4.0lf \n
[nginx_requests]
FNPATTERN ^nginx_requests.rrd
TITLE Nginx requests
YAXIS
DEF:handreq at RRDIDX@=@RRDFN@:handreq:AVERAGE
DEF:handconn at RRDIDX@=@RRDFN@:handconn:AVERAGE
DEF:accepted at RRDIDX@=@RRDFN@:accepted:AVERAGE
AREA:handreq at RRDIDX@#FF0000:Requests :0
GPRINT:handreq at RRDIDX@:LAST: Current\: %4.0lf
GPRINT:handreq at RRDIDX@:AVERAGE: Average\: %4.0lf
GPRINT:handreq at RRDIDX@:MAX: Max\: %4.0lf \n
AREA:accepted at RRDIDX@#00FF00:Accepted connections :1
GPRINT:accepted at RRDIDX@:LAST: Current\: %4.0lf
GPRINT:accepted at RRDIDX@:AVERAGE: Average\: %4.0lf
GPRINT:accepted at RRDIDX@:MAX: Max\: %4.0lf \n
AREA:handconn at RRDIDX@#0000FF:Handled connections :1
GPRINT:handconn at RRDIDX@:LAST: Current\: %4.0lf
GPRINT:handconn at RRDIDX@:AVERAGE: Average\: %4.0lf
GPRINT:handconn at RRDIDX@:MAX: Max\: %4.0lf \n
On 8 June 2018 at 16:21, Scot Kreienkamp <user-9678697f1438@xymon.invalid>
wrote:
Can you post the graph definition and the test2rrd definition?
*Scot Kreienkamp |Senior Systems Engineer | La-Z-Boy Corporate*
One La-Z-Boy Drive| Monroe, Michigan 48162 | Office: XXX-XXX-XXXX | |
Mobile: XXXXXXXXXX | Email: user-9678697f1438@xymon.invalid
*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Rich Jones
*Sent:* Friday, June 8, 2018 10:56 AM
*To:* Scot Kreienkamp <user-9678697f1438@xymon.invalid>
*Cc:* xymon at xymon.com
*Subject:* Re: [Xymon] RRD graph not working for only one test
Yep, they are in graphs.cfg
I see the following in the error log though... but i can't see it actually
looking for a graph titled 'nginx'
[Fri Jun 08 14:51:40.699316 2018] [cgi:error] [pid 26294:tid
139975110661888] [client ***.***.***.**:53876] AH01215: Setup error:
Service nginx has a graph nginx, but no graph-definition:
/usr/local/xymon/cgi-bin/svcstatus.sh, referer:
https://****/xymon/aws/aws.html
*Rich Jones* | Systems Developer
Corporation Pop
21-23 Shudehill
<https://maps.google.com/?q=21-23+Shudehill+%0D%0AManchester+M4+2AF&entry=gmail&source=g>;
Manchester M4 2AF
0161 838 0808
www.corporationpop.co.uk
This email message (and any attached file) is intended only for the use of
the individual or entity to whom the sender intended it to be addressed and
may contain information that constitutes a trade secret, or that is
privileged, confidential or subject to copyright. No part of it may be
circulated, quoted, or reproduced without prior written approval from
Corporation Pop Ltd. The contents of this document are strictly
confidential and owned by Corporation Pop Ltd. Copyright © Corporation Pop
Ltd. All rights reserved. Corporation Pop is a limited company registered
in England + Wales. Company number 4869229. VAT number 533 8932 26.
On 8 June 2018 at 15:53, Scot Kreienkamp <user-9678697f1438@xymon.invalid>
wrote:
Did you put the graph definition in either graphs.d or graphs.cfg?
*From:* Xymon [mailto:xymon-bounces at xymon.com] *On Behalf Of *Rich Jones
*Sent:* Friday, June 8, 2018 10:31 AM
*To:*xymon at xymon.com
*Subject:* [Xymon] RRD graph not working for only one test
Hi all, weird one... Have been playing about with the following nginx
monitor https://github.com/ZeWaren/xymon-nginx and I can't get the graphs
to work at all.
The test runs fine (as far as I can tell, i have modified the script to
output the data for the graph and that all looks fine), it sends it's data
etc and I can see the .rrd files created. However Xymon doesn't want to
display them at all. I simply end up with alt text and the magnifying
glass. Clicking the magnifying glass results in the "Cannot access RRD
directory" error.
I have performed an rrdtool dump on the offending graph and compared it
with other .rrd files, doesn't look to be any issue. Permissions are all
the same across all the data/rrd/host etc.
Has anyone else had this issue or similar? Any ideas?
I'm running Xymon 4.3.28
Cheers, Rich
This message is intended only for the individual or entity to which it is
addressed. It may contain privileged, confidential information which is
exempt from disclosure under applicable laws. If you are not the intended
recipient, you are strictly prohibited from disseminating or distributing
this information (other than to the intended recipient) or copying this
information. If you have received this communication in error, please
notify us immediately by e-mail or by telephone at the above number. Thank
you.